Fixing up CB250RS

[bo-nz]

Hi, just wondering if there is many of these still out there and how hard is it to get certain parts - e.g. exhausts? (Starts ok just a weeeeee bit noisy at the moment...) also the wiring is a bit questionable from what we have checked out so far.

[jellywrestler]

try econohonda in te aroha

[bo-nz]

try econohonda in te aroha

Cool thanks will check them out

[F5 Dave]

Failing that if you don't mind that it won't look like Stock Cycleworks in wgtn will be able to make one up, may have a jig so could make without bike there. Maybe.

[xwhatsit]

Failing that if you don't mind that it won't look like Stock Cycleworks in wgtn will be able to make one up, may have a jig so could make without bike there. Maybe.

You mean they don't sell them any more? I looked there a few months ago and they still have CB250RS 2-into-1s on their online catalogue. I've got a Cycleworks from god-knows-when fitted to mine.

Definitely Econohonda. Or else if you're after other things than zorsts (all 3 of my spare pairs are farked ), flick me a PM, I've got metric fuck-tonnes of RS bits lying around.

[F5 Dave]

if it's on the online cattledog it means he still has the jigs & would make to order.

[Ms Piggy]

Hi, just wondering if there is many of these still out there and how hard is it to get certain parts - e.g. exhausts? (Starts ok just a weeeeee bit noisy at the moment...) also the wiring is a bit questionable from what we have checked out so far.

I have 1 tucked up at a mates place. I had great plans of doing up my lovely CB250RS but I couldn't afford to own 2 motorbikes with no garage

PM with the parts you need and maybe I can sell ya some parts.

[dogsnbikes]

Hi, just wondering if there is many of these still out there and how hard is it to get certain parts - e.g. exhausts? (Starts ok just a weeeeee bit noisy at the moment...) also the wiring is a bit questionable from what we have checked out so far.

plenty of parts around and whole bikes,:
Im away until the 2nd but have a good manual so I can send you a wiring diagram next week if you need it

[xwhatsit]

I've uploaded the wiring diagram once before, lemme find the link for you.

EDIT: It's over here: http://www.kiwibiker.co.nz/forums/at...1&d=1183541310

[bo-nz]

Wow thanks heaps everyone, will get to and find out what needs to be done to get them on the road and go for it

[bo-nz]

I was just doing some minor work and have found that the main cylinder head has some small cracks around the spark plug... how major is this to fix or would I be better off trying to find a new head??