Hot Grips operating instructions

[Hitcher]

In my haste to uplift my ST from Motorad/Sawyers yesterday (probably still dazed from seeing Jim2's new ride up close and personal), I neglected to enquire as to the operating instructions for my new Daytona All Season Hot Grips, which were fitted during the service.

I note that there is a three-position switch: Off; Start; and On.

I've got the Off and On thing figured out, but what's the go with the "Start" position?

Has anybody else got a set of these and know what it's all about, Alfie?

Many thanks...

[Da Bird]

In my haste to uplift my ST from Motorad/Sawyers yesterday (probably still dazed from seeing Jim2's new ride up close and personal), I neglected to enquire as to the operating instructions for my new Daytona All Season Hot Grips, which were fitted during the service.

I note that there is a three-position switch: Off; Start; and On.

I've got the Off and On thing figured out, but what's the go with the "Start" position?

Has anybody else got a set of these and know what it's all about, Alfie?

Many thanks...

Not sure if they are the same ones but on my old police ST1100 the heated handlebar switch had 3 positions... the "Start" was used to get it warmed up and once it got warmed up, then you just switched it to "On", otherwise it got quite hot... on really cold days I just left it on "Start"!

[Waylander]

Not sure if they are the same ones but on my old police ST1100 the heated handlebar switch had 3 positions... the "Start" was used to get it warmed up and once it got warmed up, then you just switched it to "On", otherwise it got quite hot... on really cold days I just left it on "Start"!

That's what I was just thinking, shouldn't be too hard to figure out hitcher just play with it. If it breaks it's under warrenty so no worries.

[MD]

Hey Hitcher I'm on my third bike with Daytona hotgrips. As stated above, 'START' is for Tim the Toolman Taylor types - more power. I think they steered away from calling it 'high' because they don't want you leaving it in this position too long in case you stuff the alternator. Its for a quick burst only. I flick it on START for 4-5 minutes at a time. 'ON' is generally enough once warmed up. They are beaut on a freezing ride. Roll on winter , well no not really. Now does Mrs H get the luxury items as well on her bike?

[riffer]

Mmmmmm. Heated grips.

One of the cool things about my new bike...

[Krusti]

In my haste to uplift my ST from Motorad/Sawyers yesterday (probably still dazed from seeing Jim2's new ride up close and personal), I neglected to enquire as to the operating instructions for my new Daytona All Season Hot Grips, which were fitted during the service.

I note that there is a three-position switch: Off; Start; and On.

I've got the Off and On thing figured out, but what's the go with the "Start" position?

Has anybody else got a set of these and know what it's all about, Alfie?

Many thanks...

SHOWOFF.....

[TonyB]

START feeds gob loads of juice to each grip to get them nice and hot quickly.
ON reduces the amount of power to keep 'em warm.
According to the destructions, leaving them on start may damage the grips.
Had them on my last two bikes. Will never be without them again.

[Waylander]

You people need to harden up. Next y'all are gonna want heating and airconditioning, power windows and central locking.


Anybody know where I can get a set for the virago? J/k I can't affor them.

[TonyB]

You people need to harden up. Next y'all are gonna want heating and airconditioning, power windows and central locking.


Anybody know where I can get a set for the virago? J/k I can't affor them.

You're from the southern states, right? Texas, right? Where it's pretty warm, right? BUuuhhahahahahahahahaaaaaaaaaa, are you gonna find out the hard way. If one is riding in air temps of -6°C, the fingers get cold kinda quickly...

[Waylander]

You're from the southern states, right? Texas, right? Where it's pretty warm, right? BUuuhhahahahahahahahaaaaaaaaaa, are you gonna find out the hard way. If one is riding in air temps of -6°C, the fingers get cold kinda quickly...

Believe it or not but it gets colder in Dallas than it does here (least in hamilton) so that's not a problem. Went through my last winter there with nothing more in the way of warm gear than my jacket, wich doesn't help much so I think I can survive here. I do plan on doin heaps of riding, including south island tours, once the bike is running again and I have money so it probably would't hurt to get a set.

[Aitch]

cos winter will be here soon, and I like the idea of toasty warm hands.

[Hitcher]

cos winter will be here soon, and I like the idea of toasty warm hands.

Like most things, "it depends" on make and model. 1" bars require a bit of farting around (if you've got them) but budget on about $125 plus fitting costs, unless you're confident enough to do this yourself.

[Wolf]

Believe it or not but it gets colder in Dallas than it does here (least in hamilton) so that's not a problem.

What's the humidity/damp like in Dallas compared with here? Down in the Hawkes bay ("when I were a lud") we'd bop around at 4 degrees C with a t-shirt and light jersey, up here in the Waikato I was freezing my arse off and the thermometer was reading 12 degrees. Eight degrees warmer felt like ten degrees colder. The damp makes things a lot worse IME.

I wound up making a set of waterproof, lined mittens (couldn't find any suitable ones in the shops) for winter riding in -6 degree frosts (and fog) at 100km/h (wind chill factor bloody nasty) to keep my fingers cozzied together (like my toes, which were quite fine in medium weight socks and a pair of Sidis).

Heated grips would be great - or those plastic sheilds that they have on a lot of the trail/moto-x bikes to keep the icy wind off the knuckles.

[TonyB]

Heated grips would be great - or those plastic sheilds that they have on a lot of the trail/moto-x bikes to keep the icy wind off the knuckles.

I reckon a combination would be perfection. I ride with linerless gloves as I don't like the detached feeling you get with bulky gloves. The only down side with this is that the clutch and brake levers are still FUGGEN cold, so if you're riding in traffic or anywhere where you need to use the levers alot, the fingers still get cold. I reckon hand guards would help in this situation, plus the hands wouldn't get windchill or rain.

[Blackbird]

My instructions said 1-2 minutes on start. From memory, they transmit 25 watts in start mode. I'm not sure if I still have my instructions but if I do, do you want me to scan a copy?

Incidentally a friend used Ados contact adhesive and the throttle grip slowly started moving after a while. I used a few spots of Superglue and they haven't moved in 2 years!

Great product!

Geoff