OK it seems I'm certifiable. No collar near the top of the shock near the preload adjuster. Also I can't see collar near the bottom of the shock. The spring compression tool that KTMTwins sell might explain everything. Pic below shows that there is a spring compressor which may be used to enable a slip on collar near the base of the shock to be removed allowing removal of the spring i.e. only preload adjustment available is in the hydraulic preload adjustor. Funny thing is this pic shows the spring being compressed against the bottom of the shock so is there a slip on collar near the top of the shock. Damn it does anybody have a manual for the KTM 950 shock. I have a manual for the 5018 PDS shock but I think this is a the shock the EXC's use.

So this just leaves checking that the shock has been put together properly or finding out what spring JMJ has. KTM twins indicate on this page that the stock spring on the non S models is (05 to 07) is 150n where as the S model (05 to 07) is 140n and they offer a 130n spring.
Cheers R
"The ultimate result of shielding men from the effects of folly is to fill the world with fools." - Herbert Spencer, English Philosopher (1820-1903)
Bookmarks