Results 1 to 9 of 9

Thread: Road sweeping

  1. #1
    Join Date
    21st December 2006 - 14:36
    Bike
    Mine
    Location
    Here
    Posts
    3,966

    Road sweeping

    In the meeting at the National meeting held at the Royal Akorana Yacht Club (the one with Nix Myth) it was mentioned, by a women who I believe is an Auckland City Counsiller, that Auckland's road works do indeed get swept.

    Well, I can attest that whe was in fact "technically" correct.

    We've just had our street resurfaced with vocanic chip and yes, they did sweep it.

    However, all they did was sweep the build-up at the side of the road back in to the middle so the traffic could have another go at squashing it in to the tar! No loose chip was removed at all. They've now repainted the white lines so I assume they think they've finished. Even though there is still a large amount of very slippery loose chip lying about.
    "Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety." - Benjamin Franklin (1706-90)

    "I would rather be exposed to the inconveniences attending to much liberty than those attending too small a degree of it." - Thomas Jefferson (1743-1826)

    "Motorcycling is not inherently dangerous. It is, however, EXTREMELY unforgiving of inattention, ignorance, incompetence and stupidity!" - Anonymous

    "Live to Ride, Ride to Live"

  2. #2
    Join Date
    24th January 2007 - 22:54
    Bike
    2017, BMW, F800GT
    Location
    Auckland
    Posts
    141
    Ring the Auckland City council help line and explain the problem.

    I've found the Council will respond pretty quickly when it is a road safety issue.

    Mention to the operator (not a council person just the complany that answers the phones), that it is a road safety issue.

    The company responsible 'normally' rings you within a couple of work days.

  3. #3
    Join Date
    14th July 2006 - 21:39
    Bike
    2015, Ducati Streetfighter
    Location
    Christchurch
    Posts
    9,081
    Blog Entries
    8
    I swear in Christchurch that they just use the car traffic to sweep the gravel off new roads. But first the use the cars to actually bed the gravel into the tar they slopped all over the perfectly good road ........

  4. #4
    Join Date
    30th April 2009 - 10:57
    Bike
    Italian
    Location
    Jafa-land
    Posts
    1,290
    I've come across a lot of re-surfacing lately (seems it is the season), all of it with loose chip seal (even a week or 2 later). It is one of the elements we motorists must be ready for on our roads. I've even seen 4-wheeled motorists get a lil' jiggy when they hit it. If ACC were serious about injury prevention in the "motor vehicle account", they might want to lean on NZTA/roading contractors to make the road surfaces that much less hazardous. IdleIdolIdyll's been calling for it as long as I've known him.

  5. #5
    Join Date
    31st August 2005 - 12:00
    Bike
    2018 GSXS1000
    Location
    Temple View
    Posts
    5,042
    Blog Entries
    1
    they usually drag a weighted broom arrangement behind a ute to even it all out before they put the tar down, i dont see why they dont do it once it is sealed to level it out

  6. #6
    Join Date
    25th September 2009 - 18:05
    Bike
    A bleck one.
    Location
    Auckland
    Posts
    468
    Quote Originally Posted by DidJit View Post
    I've come across a lot of re-surfacing lately (seems it is the season)...
    It is. This time every year it starts (a bit earlier actually). They begin resurfacing perfectly good roads and leaving the fucked ones... well, fucked. They've done our relatively low volume suburban street 3 times in 10 years despite there never having been anything wrong with it, but the main road at the end of it, rutted & patched, has never had that attention to my knowledge.
    This is my signature. There are many like it, but this one is mine. My signature is my best friend. It is my life. I must master it as I must master my life. Without me, my signature is useless. Without my signature, I am useless.

    The early bird might get the worm, but the second mouse gets the cheese.

  7. #7
    Join Date
    18th May 2005 - 09:30
    Bike
    '08 DR650
    Location
    Methven
    Posts
    5,255
    Something i've posted on before

    Quote Originally Posted by Squiggles View Post
    ...
    The number below is for the Auckland City Council region in response to a query from their stakeholders group... I've found them pretty damn quick to get out there and sort it out
    Please see the response below to the action from the minutes - "Road construction & Repairs - Current practises that are a problem for motorcyclists (e.g. Pea gravel, Metal blanking plates - Utility companies putting metal blanking plates on these are a safety concern as if they are down for a period of time they start to move and become dangerous when on a motorcycle. What are the standards they are to adhere to who checks?"

    The Code of Practice for Working in the Road, Part 6.4.2.11 requires the following (edited out). Whilst we endeavour to audit as many sites as possible, resources do not allow us to do so. Can I suggest that any sites that are of concern are reported via the Call Centre phone 379 2020 request for service process and given a "Critical" priority. We will audit within 4 working hours.
    Ring it up, get them out, get them out for every little thing and follow up asking what will be done in future to prevent it happening...


  8. #8
    Join Date
    1st November 2005 - 08:18
    Bike
    F-117.
    Location
    Banana Republic of NZ
    Posts
    7,048
    Quote Originally Posted by swbarnett View Post
    We've just had our street resurfaced with vocanic chip and yes, they did sweep it.

    However, all they did was sweep the build-up at the side of the road back in to the middle so the traffic could have another go at squashing it in to the tar! No loose chip was removed at all. They've now repainted the white lines so I assume they think they've finished. Even though there is still a large amount of very slippery loose chip lying about.
    Fairly standard (crappy) practice. My road and also across Scenic Dr, was done last year. A quick reseal, the next day they repainted the white line down the centre and then removed the signs warning of new seal. "Sweep"?? they did not even attempt to do it.
    Scenic was left with plenty of patches of unmarked chip the entire length of the road.
    I phoned the council and gave them crap for letting their contractors do this and also suggested that the council cough up when the insurance companies come knocking for reimbursement after an accident. That did not appear to go down well.
    TOP QUOTE: “The problem with socialism is that sooner or later you run out of other people’s money.”

  9. #9
    Join Date
    25th January 2008 - 17:56
    Bike
    Africa Twin! 2018 all the fruit!
    Location
    New Zealand
    Posts
    4,354

    Thumbs up

    Quote Originally Posted by Squiggles View Post
    Something i've posted on before



    Ring it up, get them out, get them out for every little thing and follow up asking what will be done in future to prevent it happening...
    Cheers Squiggles. I'll use that number, OFTEN.
    Everyone else write it down, find a bit of shitty road , report it, get a name from the one you spoke too, make them aware it's a particular hazard to Motorcyclists.Also make them aware that if a crash occurs there it'll be reported to the Local Police that the council was informed, give themthe council persons name the date you spoke to them and of course which bit of unmarked road it was on, all of a sudden they have to act.
    Go for it folks lets make the councils clean up after their lazy bloody contractors.
    Every day above ground is a good day!:

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •