My GSX1100

[steelestring]

Awesome mate! those carbs are going to be very bling indeed! I have to check out those pipes you got too hehe
It would have been good to get it out for a good ride on the weekend eh?

I think you forgot to mention the new bling handle bars too in the list of work you have done to it.

Special machine dude

[jellywrestler]

Just looked into it & from the man who built them assures me that the original Black pipers had the Ali swing arm

didn't know you spoke japanese!

[BIG DOUG]

Spyda get a job

[roadracingoldfart]

I have been rebuilding this bike bike for approx 2 years now,I used to own this bike about 20 years ago & purchased it back off the guy I sold it to,so here is a photo
So far I have fitted a AP lockeed front brake master cylinder & pressure brake switch,replaced steering head,swingarm & wheel bearings,rebuilt the front & rear brake calipers,fitted wire wheels,replaced the seat(seat base was rusted),I have purchased & will be fitting a set of Mikuni VM33 carbs,also a set of Standard Suzuki Black pipes,then I will start work on the cosmetics

Sorry Barry , it dont look rite without a pack frame and a sheepskin on the seat .
Best mate had an ET in black / orange strip. nothing , but nothing out rolled it from 100kmh.

Whens my turn on it mate ????.

[roadracingoldfart]

didn't know you spoke japanese!

hes a clever chap Spyda , hes got 2 hidden tallents , Japanese fluincy and a habbit of owning bikes id like to own.
Join me in the "get stuffed you Bistard" club , free entry and an easy target !!!

[nudemetalz]

Here ya go, Bistard.
This is the pic I promised to show you when I was in WMCC the other day.
Was my old man's 1100 before he got the wire wheeler Kat.
Photographed outside Mike Vinsen Suzuki around about 1981.

Scary fairing, ay !!!

[bistard]

Thats not a fairing its a bloody spinnaker!!

[bistard]

Are you offering a sheep skin & pack frame??

[chrisso]

I had a 81 GSX1100E for a coupla years in the early 80s--loved that bike.Always had a wobble over 140 kmh odd one up though. Cured that by putting someone on the back and scaring them stupid.Mine was previously raced at the Hawkesbury road races in Marlborough.....didnt hurt it none. Moved on to even older bikes--1980 XS1100. Now I can get a wobble up at any speed haha

[roadracingoldfart]

Here ya go, Bistard.
This is the pic I promised to show you when I was in WMCC the other day.
Was my old man's 1100 before he got the wire wheeler Kat.
Photographed outside Mike Vinsen Suzuki around about 1981.

Scary fairing, ay !!!

That the specialty of Ventura , make a good looking bike really ungood.

Thats not a fairing its a bloody spinnaker!!

Americas cup special ????

Are you offering a sheep skin & pack frame??

You live up a hill ..... go to the top and get some sheep yaself , im still using mine. Baaahhhhh.

[bistard]

Ok,the next part of the project is the carbs,I need a set of GS1000ST Mikuni carbs,if anybody knows where a set are let me know

[orangeback]

Ok,the next part of the project is the carbs,I need a set of GS1000ST Mikuni carbs,if anybody knows where a set are let me know

im sure those are vm29s & you want vm32ss you'll find these out of the states on gs1000 gsx1000s, fack all over here for sale , last set of 32 i saw where $1200 , i think brice had a set 5-6 years back

[bistard]

Yes,I have a standard set of GS1000 carbs,but are the the wrong size for the airbox & inlet rubbers,Yes Bryce does have a set,I was
at his place yesterday,but they are not for sale

[orangeback]

is this what you want, this set may b for sale for 25k , and ill chuck in a free szx

[bistard]

im sure those are vm29s & you want vm32ss you'll find these out of the states on gs1000 gsx1000s, fack all over here for sale , last set of 32 i saw where $1200 , i think brice had a set 5-6 years back

I now have a set of the correct carbs,I need to clean & rebuild them,as some parts are missing,I have loaded a couple of photos,of the bike now with wire wheels & black pipes & the new set of carbs