Chch Weds Maintenance Evenings 2010

[KiwiPhoenix]

I wont be there either, i will be tucked up in bed with my box of tissues. Have fun. JM will be there.

Hope you feel better soon chick!

OK - good night until all youse guys that know where the F&C shop are sod off so fast all of us "lost buggers" are left...

So - for the record - where is the chippie?

Sorry, I zipped away so I could get a parking space. As it turned out there weren't many there tonight at the Chip shop.

I suppose I should do some maintenance and not stand aboout holding lights although I'm rather good at it!

[maxf]

I suppose I should do some maintenance and not stand aboout holding lights although I'm rather good at it!

You light up our lives?
And - "if it ain't broke, don't fix it" - does really apply (and does save you money!).

[JMemonic]

I suppose I should do some maintenance and not stand aboout holding lights although I'm rather good at it!

I recall someone saying she was going to do some lubrication at the maintenance evening, I am not looking at anyone in particular

[jim.cox]

Arrr Fugg It

Was hoping to front up to some of these sessions

But No, I find the Mrs has booked us into some dodgy "marriage course" being run by her God-bothering Jewish-Zombie-Cult mates

And there is NO escape :( sigh

[KiwiPhoenix]

I recall someone saying she was going to do some lubrication at the maintenance evening, I am not looking at anyone in particular

I know, I know!! It'll keep till next week!

Arrr Fugg It

Was hoping to front up to some of these sessions

But No, I find the Mrs has booked us into some dodgy "marriage course" being run by her God-bothering Jewish-Zombie-Cult mates

And there is NO escape sigh

Bugger!

You light up our lives?
And - "if it ain't broke, don't fix it" - does really apply (and does save you money!).

Why thank you!

[neels]

But No, I find the Mrs has booked us into some dodgy "marriage course" being run by her God-bothering Jewish-Zombie-Cult mates

You just need to convince her that more sex and more motorcycle maintenance improves a marriage.

[JAS-1100]

hi I have a 1988 1100F suzuki I will Be dropping a 1993 GSXR1100 Engine in it this would be good for a maintenance evening for the advanced people and need to do some cast alu welding at the same time i can teach people to cast alu weld as well and the gear to cast alu weld will cost about $100 very sample to do something a have discovered

[cruza]

You just need to convince her that more sex and more motorcycle maintenance improves a marriage.

Your on too it neels , don't forget bout the rallies as well.............

anyway ........ you shouted ya steed a new chain and spockets yet?

[gloplg]

For all of you who are like me and not computer whizes but would like to see the Satrides thread try the following address.

http://www.kiwibiker.co.nz/forums/sh...r-(not-the-WNR)

Drag it to your windows desktop and stay up to date with what is happening. Or not as the case may be.

[Flip]

Hi

FYI

I sent a sample of the oil from the first oil change to Goughs for testing. It came back with what you would expect. The iron, silicon, chrome, copper and aluminium levels were all high. This bike only has a very basic oil slinger-type filter. The lab correctly identified to run the bike for another 20 hours and resample the oil.

P_



DETAILS
Lab No Eval Date Sampled Date Received Meter Read Fluid Hours Fluid Added Fluid Changed
G100411645 C 22-Apr-2010 28-Apr-2010 500 0 0.00 Y



ELEMENT TESTS
Lab No Eval Cu Fe Cr Pb Al Si Na Sn Mo Ni Mg Zn Ca P B Ba Cd Mn Ag Ti V K
G100411645 C 56 372 99 3 71 112 16 1 4 0 677 1338 440 1088 2 7 0 5 0 2 0 6



LUBRICANT TESTS
Lab No Eval W NIT GLY F ST SUL OXI DEP V100 V40 PQ TAN TBN Flash AW Gly % H2O
G100411645 C 14.8 6 0 0.00 2 15 8 - - 90.4 - - - - - - -

Running in oil. Insufficient information supplied on the label to accurately interpret this sample.Please supply the hours on the oil. The iron, silicon, chrome, copper and aluminium levels arehigh. What fuel is this motor cycle running on ? As the oil has been changed resample in20 hours to monitor the trend. If assistance is required phone John (03) 9433153. Rapid Results. Expert Friendly Advice. Its what we do.

[phoenixgtr]

I think you scared everyone away with all that technical jargon Flip. It's been really quiet round here this week.

I might be along tonight for a bit, although I'm bikeless at the moment (ignoring the 2 race bikes, the SV and the shed full of bike parts). The CBR's gone away to be put back together. She should be like new next week. Yay!!

[gloplg]

I think you scared everyone away with all that technical jargon Flip. It's been really quiet round here this week.

I might be along tonight for a bit, although I'm bikeless at the moment (ignoring the 2 race bikes, the SV and the shed full of bike parts). The CBR's gone away to be put back together. She should be like new next week. Yay!!

Good to hear you are getting your bike fixed, hope to see you tonight.

[KiwiPhoenix]

Quite a nice turnout tonight! Bloody cold though!

[gloplg]

Cold who was cold?????

Anyway the executive of the "Saturday Ride" met tonight and after long discussions and deep thought, it was decided to set the meet time forward by an hour and a half to 11.30 with the departure time being 12.00. This still gives us the opportunity to go to a cafe or pub for lunch and a chat, which was the origional idea behind the SatRides.

Akaroa this week???????

And now for something completely different.

It has come to my attention that people were seen actually grinning tonight at the Wednesday Maintenance Evening. Unless they were grimacing with terror at Flip's driving style????? What think the crew???

[KiwiPhoenix]

I was cold!! Well, my hands were...

Great pics Gloplg! I definitely think it was the Grin factor, now to set up the "Sidecar Club"