Introducing Harry

[wysper]

Nice mate,
er how much

$180 incl freight (i think the guy is in Dunedin) plus I am rural so it costs a bit extra for freight.
The genuine suzuki one is over 3 hundy.

[wysper]

you can buy the foam tape, one side is sticky other is a soft foam, i used this on my DR, i marked where the frame touches the plate and stuck the foam to the plate so it was in between the frame and plate, i also made up some rubber washers, and used them where it bolts on to the bike..

that took a lot of the vibration out the the plate and made it heaps quieter.

JMJ

Should have multi quoted.... good idea. I will see how noisy it is. Doesn't look like it touches the frame in too many places. But the rubber washers are a good thought almost regardless.

[NordieBoy]

you can buy the foam tape, one side is sticky other is a soft foam, i used this on my DR, i marked where the frame touches the plate and stuck the foam to the plate so it was in between the frame and plate, i also made up some rubber washers, and used them where it bolts on to the bike..

that took a lot of the vibration out the the plate and made it heaps quieter.

JMJ

Buy?!

He's a DR owner!

[NordieBoy]

I used 3x15mm strip rubber from Para Rubber down the rails and inner-tube on the front mount.

Little bro managed to bend it up a bit on some Rainbow river crossings and I havn't had a chance to unbend it yet so I'm using the Suzi one for the moment.

Did you get a laser-cut fox head with your GP?

[gpcustom]

Hi Guys . Yep im in dunedin and will make these to order . Sorry not everyone will get the fox head just depends if i have any at the time as there is a new guy running the laser now
i allso make them the drz400. Ive allso just built one for a 09 yzf450 but its being tried out for a while befor i start making anymore

Chris

[NordieBoy]

Hi Guys . Yep im in dunedin and will make these to order . Sorry not everyone will get the fox head just depends if i have any at the time as there is a new guy running the laser now

To make them 'bro proof you need to increase the thickness to about 7-10mm.

But then the little bro would probably take that as a challenge...

[wysper]

whats a fox head?

[gpcustom]

Fox racing as in fox boots and other bike gear
i engraved it into this bash plate a little hard to see but it looks cool

[wysper]

Ahhh I thought it might have been some extra shape that goes higher or something. I like you gpcustom badge on the side.

[dino3310]

Fox racing as in fox boots and other bike gear
i engraved it into this bash plate a little hard to see but it looks cool

got any XR templates...

[gpcustom]

as in honda xr

[dino3310]

yep xr600 1993

[gpcustom]

so do you want just the xr bit or xr600. i will take a pic of the plate i had cut. I used it whe i made a mufflers and then sand blasted the gsx logo to the muffler

[dino3310]

sorry mate i was meaning the whole skidplate.

[junkmanjoe]

sorry mate i was meaning the whole skidplate.

what ya want one of them for....you forgotten how to ride..bumping in to things are ya....old man.........
by the way, that branding looks neat...

JMJ