View Poll Results: chains do you oil or wax?

Voters
107. You may not vote on this poll
  • oil

    70 65.42%
  • wax

    33 30.84%
  • no have shaftdrive

    4 3.74%
  • no have beltdrive

    0 0%
Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 52

Thread: chains,do you oil or wax?

  1. #16
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    Quote Originally Posted by Wolf
    How does wax fare so far as removing it (and the attached grit/boulders) with kero when you want to give it a fresh, non-abrasive, application?
    No problem at all.
    By the way - if you don't apply too much of any chain lube, and allow it to dry thoroughly - say overnight - (assuming it's one with solvents in it, like chain wax) then crap doesn't stick to it much anyway.
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  2. #17
    Join Date
    3rd January 2005 - 11:00
    Bike
    All of them
    Location
    Brisvegas
    Posts
    12,472
    WD40 - all I've used for years now - It washes off and you have to splash it on regularly but it's doubled my chain life.
    Keeps 'em clean too.
    Hell - I'd bath in the stuff.

  3. #18
    Join Date
    9th March 2003 - 11:00
    Bike
    Triumph Daytona 650 in RED
    Location
    Te Puke, NZ
    Posts
    856
    Quote Originally Posted by Blackbird
    Scottoiler Steve - the only time I adjust my chain is when new tyres are fitted. The chain basically never moves. $220 of good investment!
    I've just had one installed on the Daytona 650 & I'm hoping to see similar results. Fingers crossed!
    "Women & cats will do as they please, and men and dogs should relax and get used to the idea." Robert A. Heinlein

    "Do not meddle in the affairs of cats, for they are subtle and will piss on your computer." Bruce Graham

  4. #19
    Join Date
    22nd October 2002 - 11:00
    Bike
    Sold
    Location
    Coromandel Town
    Posts
    4,420
    I doubt that you will regret it. Just a tip - the manufacturers say a flow rate of "about" 2 drops per minute. I find that under normal conditions, this is too much. About half that rate is fine unless it's really wet or you travel on dirt roads a lot. Set your flow rate when you've been for a run and everything has warmed up. A cold setting will deliver too much oil when everything is warm. There's also a difference in flow between winter and summer riding but it's easy to adjust.

    Geoff

  5. #20
    Join Date
    20th November 2002 - 11:00
    Bike
    SW-125R(F4-TF125), ZXRD400, RD250LC
    Location
    Wellington, New Zealand,
    Posts
    5,963
    Blog Entries
    36
    Quote Originally Posted by Blackbird
    I doubt that you will regret it. Just a tip - the manufacturers say a flow rate of "about" 2 drops per minute. I find that under normal conditions, this is too much. About half that rate is fine unless it's really wet or you travel on dirt roads a lot. Set your flow rate when you've been for a run and everything has warmed up. A cold setting will deliver too much oil when everything is warm. There's also a difference in flow between winter and summer riding but it's easy to adjust.

    Geoff
    We've found these to be great for our bikes - almost set and forget. My 1100 has over 20,000km's on the original chain and is still going strong. Yes, the Scott was fitted from near new.

  6. #21
    Join Date
    2nd May 2005 - 01:22
    Bike
    2012 Moto Guzzi Stelvio 8V
    Location
    Perth, W.A; ex Tauranga
    Posts
    1,720

    Smile

    Thank goodness for shaft drive.
    Marty

    Ever notice that anyone slower than you is an idiot, but anyone going faster is a maniac?

  7. #22
    Join Date
    24th September 2004 - 06:46
    Bike
    '76 CB550 Super Sport
    Location
    On the road to nowhere...
    Posts
    7,414
    Quote Originally Posted by Skunk
    We've found these to be great for our bikes - almost set and forget. My 1100 has over 20,000km's on the original chain and is still going strong. Yes, the Scott was fitted from near new.
    Not bad. I sold my ol '81GSX750EZ in 85 with 52,000ks on the original 630 chain and sprockets fitted without a Scottoiler . This "new" GSX750EX I have, with 19,000kms up, chain n sprockets looks good too plenty of adjustment left.

  8. #23
    Join Date
    1st February 2004 - 11:00
    Bike
    several
    Location
    out west
    Posts
    9,600
    Quote Originally Posted by Bonez
    Not bad. I sold my ol '81GSX750EZ in 85 with 52,000ks on
    sorry wax/oil posters but I just have to but in here and say 'Bonez' mate I had one of them and a mate had the only other one I have ever seen, tiz the only inline 4 I have ever owned.... check it out

    it had 75,000km on it when I sold it..... never touched the chain.
    pic 1) in the motor camp under the bridge north shore ???
    pic 2) as I brought/sold it
    pic 3) on the way to the brass

    wax on oil off people
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	EZ in Aucker's.jpg 
Views:	12 
Size:	63.3 KB 
ID:	11133   Click image for larger version. 

Name:	CX & EZ.jpg 
Views:	15 
Size:	127.7 KB 
ID:	11134   Click image for larger version. 

Name:	EZ-brassjkl.jpg 
Views:	19 
Size:	101.0 KB 
ID:	11135  
    cheers DD
    (Definately Dodgy)



  9. #24
    Join Date
    17th May 2005 - 17:11
    Bike
    Looking
    Location
    New Plymouth
    Posts
    36
    Bought my ride about 2 months ago and one of the first things i did was thouroughly clean the chain and then lubed it with gearbox/diff oil. I travel around 500kms a week so once a week i thouroughly clean my chain with a clean rag and then sparingly lube it with gearbox/diff oil. It looks brand new and i hardly have to clean it now
    Notice that the stiffest tree is most easily cracked, while the bamboo or willow survives by bending with the wind - Bruce Lee

  10. #25
    Join Date
    22nd May 2004 - 20:44
    Bike
    2003 R1150GS Adventure
    Location
    Wellington
    Posts
    457
    Scottoiler for me to.

    Bought the Busa with 32,000k on the clock.
    The previous owner put a new chain on at around 25,000k
    I put a Scottoiler on when I bought it and the same chain is still on at over 76,000ks.

    Its now on its maxiumum adjustment but its been wearing evenly there are
    no tight spots etc and the sprockets look fine.


  11. #26
    Join Date
    5th August 2005 - 18:41
    Bike
    06 R None
    Location
    Norf
    Posts
    580
    and what about Chainbar Lube...The trees dont seem to care!
    "Ability hits the mark where presumption overshoots and diffidence falls short". Nicholas of Cusa

  12. #27
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    we are talking about bikes arent we? either way its all natural [did i spell that right? havn't had to spell since i left school so i have an excuse....]
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  13. #28
    Join Date
    18th February 2005 - 21:14
    Bike
    Bikeless
    Location
    Across the bridge
    Posts
    609
    PJ1 - BLUE LABEL!

    If I heat the chain up (go for a ride) then oil it and leave overnight, doesn't flick off...

  14. #29
    Join Date
    29th September 2003 - 12:00
    Bike
    ZR750 Kawasaki
    Location
    Waiuku
    Posts
    1,946
    Oil in a can,but I think it's got wax in it as well.
    Every 400kms,ALWAYS.
    When the next bike arrives it's getting a Scott oiler.
    Spoken to several guys with them an their chain/sprocket life is amazing.

  15. #30
    Join Date
    3rd January 2005 - 11:00
    Bike
    All of them
    Location
    Brisvegas
    Posts
    12,472
    WD40 only and regularly
    Forget the wax
    WD40
    Forget the oils
    WD40
    It doubles my chain life - I'd bath in it if I could.
    I luff WD40!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •