Results 1 to 4 of 4

Thread: Ktm lower heim bearing

  1. #1
    Join Date
    16th December 2007 - 16:40
    Bike
    2013 xc 250f
    Location
    Hamilton
    Posts
    224

    Ktm lower heim bearing

    Anyone used the rubber heim bearing on the ktm shock,in place of the steal ones, I think it is called an F bushing, my heim bearings are shot afther 25 to 30 hrs. expensive at $80 a time.

  2. #2
    Join Date
    10th September 2008 - 21:23
    Bike
    Tyre Shredder
    Location
    Valley of the Sun
    Posts
    1,068
    Having just attempted to put the heim joint back in a exc I'd recommend the F type. Even if it lasts half as long (from what i've read time is similar). Those dust caps are a fricken pain.
    Ciao Marco

  3. #3
    Join Date
    15th February 2006 - 15:25
    Bike
    Orange ones! (and a few others...)
    Location
    Auckland
    Posts
    2,970
    I had the 200's replaced by Triple X last year for around $85 (I think), just took the swingarm in and picked it up a day later, lots easier than trying to do it yourself. May be worth a phone call to TMG to get a price?
    Mine lasted a lot longer than 30 hours as well (120hrs) but I certainly don't give it a hard time.

  4. #4
    Join Date
    18th August 2008 - 20:41
    Bike
    KTM exc
    Location
    auckland
    Posts
    407
    Quote Originally Posted by Crisis management View Post
    I had the 200's replaced by Triple X last year for around $85 (I think), just took the swingarm in and picked it up a day later, lots easier than trying to do it yourself. May be worth a phone call to TMG to get a price?
    Mine lasted a lot longer than 30 hours as well (120hrs) but I certainly don't give it a hard time.
    What about South Auckland Motors KTM... =P

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •