Wossner pistons?

[josh_oj]

Anyone here used a Wossner piston or know what they are like? Mx shop and motoxparts website sell them. Is it better to go OEM from the dealer or can you get away with these. Also when im doing the piston in my YZ125 what else should i be looking at replacing besides the piston rings and gaskets?

[t595]

Yip they're good,never had a problem with them. you should replace the pin,small end bearing and cir-clips too

[meteor]

Yes I used one in sons KX85. Done 45 hrs and on second ring.. no probs. Search the net they have good reviews.

[josh_oj]

Sweet, are the gasket kits that come with them all good too?
http://www.motoxparts.co.nz/motoxspa...e=1&piece=1249

[barty5]

Sweet, are the gasket kits that come with them all good too?
http://www.motoxparts.co.nz/motoxspa...e=1&piece=1249

yup have used in the past 3 or 4 times

[motor_mayhem]

Have one in my current bike - no troubles to speak of

[meteor]

Sweet, are the gasket kits that come with them all good too?
http://www.motoxparts.co.nz/motoxspa...e=1&piece=1249

Only thing I found was that the top end gasket kit it didn't come with a KIPs valve gasket but the full gasket kit had one (for the KX85). But the gaskets themselves are fine. I'd advise you to check that you've got all the bits you need before swinging on the spanners.