Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: Moving to NZ from US and bringing my bike

  1. #1
    Join Date
    5th April 2011 - 14:04
    Bike
    2007 Suzuki M50
    Location
    West Harbour, Auckland
    Posts
    13

    Moving to NZ from US and bringing my bike

    I'm coming over around October with my M50 and was reading up on the site to find answers to my questions. I still had a couple of questions and hoped that the experts here could help.
    >Do I need to make any changes to the bike to make it legal in NZ?
    >Anyone have some tips on companies they've used with success to ship household goods and bike together?
    >Exactly what do the inspectors look for when deciding how clean the bike is before charging a fee to clean it? I've read alot about how picky they are and would like to avoid that fee if I can.
    >What "hidden" costs could I have missed once I have the bike in NZ?
    Thanks for your help and I look forward to riding the roads of NZ very soon.

  2. #2
    Join Date
    15th June 2008 - 18:13
    Bike
    rego on hold nick smith special
    Location
    NZ
    Posts
    1,933
    Blog Entries
    1
    You probably know this but just incase- to get it on the road you'll need to go through compliance/registration. It will cost about 400 in total including plates and some road tax. You'll need a brake certificate (about 50 bucks) and the rest of the bike will need to be road worthy. You guys don't have periodic safety tests (Wof/warrant of fitness over here) there right?

    Best of luck with the move and welcome! Sounds like a good decision.
    ...Full throttle till you see god, then brake.

  3. #3
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    You will possibly need a new headlight, we use the left hand side of the road.

    For compliance here, all lights and brake hoses must be marked 'DOT'. And aftermarket exhausts need to have DB levels and shit on them. A lot of non standard exhausts do not comply with our regulations.

    Once it's complied though you can chuck your loud pipe back on and get a Warrant of fitness (we gotta do this every six months) no worries.

  4. #4
    Join Date
    13th February 2004 - 06:46
    Bike
    Forza 155 SE Pit Bike
    Location
    Wellington
    Posts
    11,471
    With regards to cleaning it, just make sure there's no mud and shit around the place. Have your shipping co. fumigate the bike for you before shipping and they'll provide a certificate that will satisfy NZ MAF that there's no critters living on it.
    Vote David Bain for MNZ president

  5. #5
    Join Date
    10th December 2005 - 12:19
    Bike
    Hodor
    Location
    Hodor
    Posts
    2,028
    Dont bother bringing a M50 over bring a Harley instead it should end up being more financialy rewarding for you

  6. #6
    Join Date
    28th September 2004 - 15:44
    Bike
    '07 RSVR1000
    Location
    Brisbane
    Posts
    1,113
    We recently imported two bikes into Australia so I can tell you what we did. It basically consisted of emptying a can of degreaser on each bike and getting all the road grime off it. We went as far as removing our side fairings and scrubbing behind them, doing the wheels, under mudgards, chain, around the frame, etc. We also had to pick any bugs out of the radiator (thankfully the 600 had a new radiator). Our bikes sailed through the Australian AQIS inspection and didn't need to be fumigated.

    I'm not sure whether you will pay duty or GST to import a bike into NZ but you should investigate this.

  7. #7
    Join Date
    21st September 2010 - 19:16
    Bike
    2007 yamaha yz250f
    Location
    Napier
    Posts
    340
    Quote Originally Posted by MotoGirl View Post
    We recently imported two bikes into Australia so I can tell you what we did. It basically consisted of emptying a can of degreaser on each bike and getting all the road grime off it. We went as far as removing our side fairings and scrubbing behind them, doing the wheels, under mudgards, chain, around the frame, etc. We also had to pick any bugs out of the radiator (thankfully the 600 had a new radiator). Our bikes sailed through the Australian AQIS inspection and didn't need to be fumigated.

    I'm not sure whether you will pay duty or GST to import a bike into NZ but you should investigate this.
    As long as you can prove you have owned the bike for more then a year you dont have to pay the import tax.
    Its always a good ride when you come home in one piece.

  8. #8
    Join Date
    4th October 2008 - 16:35
    Bike
    R1250GS
    Location
    Wellington
    Posts
    10,247
    our speedo's are in kilometres,not sure if that will be a problem(yours will be miles)

  9. #9
    Join Date
    21st September 2010 - 19:16
    Bike
    2007 yamaha yz250f
    Location
    Napier
    Posts
    340
    Quote Originally Posted by BMWST? View Post
    our speedo's are in kilometres,not sure if that will be a problem(yours will be miles)
    No Problem There 30miles in 50kph and 60miles in 100kph
    My datsun 1200 coupe is in miles
    Its always a good ride when you come home in one piece.

  10. #10
    Join Date
    5th April 2011 - 14:04
    Bike
    2007 Suzuki M50
    Location
    West Harbour, Auckland
    Posts
    13
    Quote Originally Posted by Drew View Post
    You will possibly need a new headlight, we use the left hand side of the road.

    For compliance here, all lights and brake hoses must be marked 'DOT'. And aftermarket exhausts need to have DB levels and shit on them. A lot of non standard exhausts do not comply with our regulations.

    Once it's complied though you can chuck your loud pipe back on and get a Warrant of fitness (we gotta do this every six months) no worries.
    I'll check the lights and hoses. Everything on the bike is original so I'm pretty sure it'll be fine. My speedo has miles and Km so I don't think that will be a problem, either. What the difference on the headlight Left vs Right? Is that something I can do ahead of time? Thanks for the great info!

  11. #11
    Join Date
    5th April 2011 - 14:04
    Bike
    2007 Suzuki M50
    Location
    West Harbour, Auckland
    Posts
    13
    Quote Originally Posted by Scouse View Post
    Dont bother bringing a M50 over bring a Harley instead it should end up being more financialy rewarding for you
    It wasn't much of a choice: Paid for M50 that has nearly 40,000 miles on it = no selling value :VERSUS: Harley for tens of thousands of dollars. I'd love to choose the Harley, but all the cash is going in to getting to NZ and another bike was low priority.

  12. #12
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    I have imported a couple of bikes into NZ. Anything not stock, will be queried at the compiance check.

    The cleaning bit needs to be thorough, including under the fairings and mudguards. It ain't cheap letting the NZ MAFF inspectors get it done for you.

    My present bike came from LA. The lights have Synchonous beams, which means they are OK for left and right side drive countries. Hopefully your bike might be the same. The lens switch kit would otherwise have cost heaps of cash. If you check this out for your bike before coming, you may be able to buy a cheap lens switch kit in the US from someone who has done the same as you, importing from a 'drive on the left' country going to the USA.

    Good luck.

  13. #13
    Join Date
    5th April 2011 - 14:04
    Bike
    2007 Suzuki M50
    Location
    West Harbour, Auckland
    Posts
    13
    Quote Originally Posted by YellowDog View Post
    I have imported a couple of bikes into NZ. Anything not stock, will be queried at the compiance check.

    The cleaning bit needs to be thorough, including under the fairings and mudguards. It ain't cheap letting the NZ MAFF inspectors get it done for you.

    My present bike came from LA. The lights have Synchonous beams, which means they are OK for left and right side drive countries. Hopefully your bike might be the same. The lens switch kit would otherwise have cost heaps of cash. If you check this out for your bike before coming, you may be able to buy a cheap lens switch kit in the US from someone who has done the same as you, importing from a 'drive on the left' country going to the USA.

    Good luck.
    Great tip! I'll check into the lights. Is there a shipping company you've found that you'd recommend? I'm shipping household stuff too so it may be a bit different. thanks again.

  14. #14
    Join Date
    25th January 2007 - 10:06
    Bike
    '14 Multistrada 1200S
    Location
    palmy
    Posts
    3,759
    Quote Originally Posted by idada View Post
    .
    What "hidden" costs could I have missed once I have the bike in NZ?
    our epic fuel prices....although they'll be pretty hard to miss once you're here
    F M S

  15. #15
    Join Date
    5th April 2011 - 14:04
    Bike
    2007 Suzuki M50
    Location
    West Harbour, Auckland
    Posts
    13
    Quote Originally Posted by yod View Post
    our epic fuel prices....although they'll be pretty hard to miss once you're here
    Yeah! That was the whole reason I began looking at a bike to begin with a few years ago. Commuting 90 miles round trip in Washington DC traffic was killing me in gas for a car. From what I've seen, the weather in NZ should allow me to ride year 'round more comfortably. (even though mine has only sat when it snowed or we had icy roads). Fuel prices are pretty severe everywhere

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •