Bar end mirrors to suit 1" bars

[kiwifruit]

Adapters only:
http://cgi.ebay.com/ebaymotors/Bar-E...s#ht_500wt_750

[scumdog]

THANKS FOR ALL THE HINTS AND ADVICE GUYS, STILL CONSIDERING MY OPTION

Thanks for all the advice and leads guys, still considering all options and atm contemplating mirrors hanging under the bars - but need new location for the indicators.

[hayd3n]

THANKS FOR ALL THE HINTS AND ADVICE GUYS, STILL CONSIDERING MY OPTION

Thanks for all the advice and leads guys, still considering all options and atm contemplating mirrors hanging under the bars - but need new location for the indicators.

they might cjash with the tank when you attempt a sharp slow turn

[scumdog]

they might clash with the tank when you attempt a sharp slow turn

Good point - I'll experiment regarding clearances.

[kiwifruit]

http://cgi.ebay.com/ebaymotors/Turn-...Q5fAccessories

[Kickaha]

they might cjash with the tank when you attempt a sharp slow turn

I thought all turns Harleys did were slow not just the sharp ones

[scumdog]

I thought all turns Harleys did were slow not just the sharp ones

Their turn is a fucking sight sharper than you sonny!

[imdying]

What's wrong with the standard ones? Your shit heap vibrate to much to let you see behind you?

[scumdog]

What's wrong with the standard ones? Your shit heap vibrate to much to let you see behind you?

Nah, fitted narrower bars - now the mirrors just show a reflection of my magnificent biceps!!!

[The Lone Rider]

Nah, fitted narrower bars - now the mirrors just show a reflection of my magnificent biceps!!!

Perhaps these

http://www.refinedcycle.com/product....&categoryId=11

[popelli]

It seems the 'budget' ones don't cater for 1" bars, sheesh, what's a guy to do, buy sleeves to make the 22mm ones fit??

buy an old lathe and start machining bits up for yourself

I did that a few years ago and have never looked back, makes life so much easier being able to make things fit in a better engineered fashion