Suzuki bash plates - KB member deal

**gpcustom** · 28th September 2009, 16:49

I want to sell some of my bash plates. Can do them for the drz 400 easy as. Can allso do them for the dr650 but with out the bike i cant drill and tap the mounting bracket. You can do this you self i suply all bolts and 3mm stainless mounting bracket you just need to bolt braket on and mark the holes (easy) Made from 4mm alloy plate with oil drain hole so you wont have to remove once fitted.

Dr650 normal price $180 will do for $140

Drz400 normal price $160 will do for $135

if a kb member in dunedin wants one for a dr650 i can do the holes for the bracket and they can have the plate for bugger all

**NordieBoy** · 28th September 2009, 17:12

Pics of the 650 one?

**gpcustom** · 28th September 2009, 17:30

to work in the morning. ive got the bash plate i use as a patern at work.

**cold comfort** · 28th September 2009, 19:29

Originally Posted by gpcustom

I want to sell some of my bash plates. Can do them for the drz 400 easy as. Can allso do them for the dr650 but with out the bike i cant drill and tap the mounting bracket. You can do this you self i suply all bolts and 3mm stainless mounting bracket you just need to bolt braket on and mark the holes (easy) Made from 4mm alloy plate with oil drain hole so you wont have to remove once fitted.

Dr650 normal price $180 will do for $140

Drz400 normal price $160 will do for $135

if a kb member in dunedin wants one for a dr650 i can do the holes for the bracket and they can have the plate for bugger all

I would be interested unquestionably. Prob make sense to install before the Back of Beyond too. PM the details for a fit up.

**gpcustom** · 28th September 2009, 19:48

and will get a pic up when i get home from work

**chrisktm** · 29th September 2009, 07:29

Keen as for a 650 one please

**gpcustom** · 29th September 2009, 16:08

keep in mind this is my template not the finished bash plate

**gpcustom** · 29th September 2009, 16:12

the bracket bolts to your engine mount and then the bash plate bolts to that. The rear of the plate bolts up under the motor. There is two factory mounts allready there

**Monstaman** · 30th September 2009, 06:51

Any pics with one mounted on a DR650? ,I am keen as well, coming to Dunedin for Biketober so could pick up then.

**gpcustom** · 30th September 2009, 16:33

im going to fit one to cold comforts bike and get some pics. Allso trying to get hold of a guy i sold one to for pics.

**gpcustom** · 1st October 2009, 17:22

this is not the finished bash plate.
The finished plate has nicer welding/cleaned up edges/ and has a badge on it

**junkmanjoe** · 1st October 2009, 20:29

hi thats a good idea how you made the bottom front mount.
what thickness is your plate.

JMJ

**NordieBoy** · 1st October 2009, 21:25

Originally Posted by junkmanjoe

hi thats a good idea how you made the bottom front mount.
what thickness is your plate.

JMJ

Looks like 4mm from the photo.

**gpcustom** · 2nd October 2009, 05:35

and it took me a while to figure out the mounting braket off the motor mount. it seems to work well

**Monstaman** · 2nd October 2009, 07:23

Count me in for one please gpcustom, we are coming down to Bikeotober so will pick up then if that is cool, happy to pay you up front.

With those turn ups at the front that is a great pie warmer gents

coldcomfort ... ya bike is too clean mate ... she is pretty in black tho