Results 1 to 8 of 8

Thread: Chain came off

  1. #1
    Join Date
    25th September 2006 - 19:30
    Bike
    2016 GSXS 1000F
    Location
    City suburb
    Posts
    1,108
    Blog Entries
    1

    Chain came off

    SH1 at Tawa on ramp heading south in the right lane was a chain - missed running over that. A couple hundred metres up the road was the bike and rider. Couldn't stop so spun off at next slip road back North and off and on again at Tawa. The rider had already made a call to be picked up and didn't know where his chain was; no way was I going back to try and recover it. The rear sprocket was seriously worn with curved teeth and the chain had destroyed the chain guard. Lucky he didn't get thrown off. Had recently bought the bike (1980s) and said it ran well. Sure; but what about the rest of the bike?
    Here for the ride.

  2. #2
    Join Date
    11th May 2006 - 17:01
    Bike
    88 GL145, 81 cm400 custom, 03 KLR650a
    Location
    Christchurch
    Posts
    553
    The exact same thing happened to me when I bought my KLR. I knew the chain and sprockets were stuffed and got some new ones ordered but they didn't arrive before I left for Nelson to pick up the bike.

    I dropped the chain just before you come into a small settlement called Engineers Camp in the Lewis Pass. Ended up leaving it there overnight. Had to hitchhike back to Rangiora and drive back the next day with a bike trailer to pick it up.

  3. #3
    Join Date
    21st October 2009 - 12:16
    Bike
    Cammy (2008 CBR1000RR)
    Location
    Auckland
    Posts
    806
    I broke a chain attempting to clutch up a mono. Jammed up the rear wheel good.

    I haven't tried wheelieing since.

  4. #4
    Join Date
    14th August 2011 - 14:32
    Bike
    Triumph Saint,Triumph Adventurer
    Location
    Auckland
    Posts
    641
    Not hard to see,just spent the bucks on a bike and now a new chain an sprockets suddenly look "very expensive",,,can be a sharp learning curve but.

  5. #5
    Join Date
    11th May 2006 - 17:01
    Bike
    88 GL145, 81 cm400 custom, 03 KLR650a
    Location
    Christchurch
    Posts
    553
    Quote Originally Posted by Road kill View Post
    Not hard to see,just spent the bucks on a bike and now a new chain an sprockets suddenly look "very expensive",,,can be a sharp learning curve but.
    Its one of the things I usually do as soon as I get a new bike. I never want to have a repeat of my chain coming off again!

  6. #6
    Join Date
    9th November 2005 - 18:45
    Bike
    2005 Z750S
    Location
    Wellington
    Posts
    1,136
    Had that on my first bike (about twenty years ago). An RD250/350LC. Went 'round a corner in town, chain slipped off the rear sprocket, I revved it to exit the corner, no go, back off throttle, chain flings forward and knocks a bit of the engine case off. Gearbox oil all falls on the road. A lesson in maintenance learned.
    Measure once, cut twice. Practice makes perfect.

  7. #7
    Join Date
    17th October 2008 - 00:27
    Bike
    87 Honda VTZ250
    Location
    Christchurch
    Posts
    589
    Havn't broken a chain myself, but a previous owner of my VTZ did, how do I know, a chunk missing out of the sprocket cover, half of which I found jammed under the shock absorber.

    Bet it would have been brown trousers time for whoever was on it at the time.

  8. #8
    Join Date
    24th September 2008 - 01:32
    Bike
    a shiny new(ish) one
    Location
    Dunedin
    Posts
    3,650
    Quote Originally Posted by sinned View Post
    SH1 at Tawa on ramp heading south in the right lane was a chain - missed running over that. A couple hundred metres up the road was the bike and rider. Couldn't stop so spun off at next slip road back North and off and on again at Tawa. The rider had already made a call to be picked up and didn't know where his chain was; no way was I going back to try and recover it. The rear sprocket was seriously worn with curved teeth and the chain had destroyed the chain guard. Lucky he didn't get thrown off. Had recently bought the bike (1980s) and said it ran well. Sure; but what about the rest of the bike?
    was it a relatively new rider? or just one with an apparent lack of mechanical intuition?

    Did you offer them some advice, or perhaps steer them in the direction of someone who could assist them inavoiding such disasters in the future, or is this just an 'what a fuckin idiot that guy is' post?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •