I guess the answer to your question is another question? Which mode of gear change can you do smoother?
But actually, I think you're better off forgetting about changing gears for the time being. What you want to work on is finding that balance point at keeping the bike there. Ideally you would be able to do it just with throttle control, but being new to it all, this is unlikely. I think you need to learn to bring your foot to the brake as a fail safe, because there's a pretty good chance you'll overcook it at some point and just rolling off isn't going to bring the front of the bike down. And if you've got up into 2nd or third gear by this point it's going to be a bigger mess.
Cards on the table: I haven't tried on a motorbike yet. I might get around to trying to learn... I might not. I have done plenty on mountain bikes over the years, and what you're talking about sounds a lot like when you get the front up on a push bike and have to keep pedaling faster and faster to keep it there. Basically because you haven't found the balance point. I like to get the front of my mountain bike up past balance point til it starts to go over backwards, and then ride the rear brake to save it. I try to get as far over backwards as possible and still save it.
Well, that 's my advice... take it as you will.
Re One armed Bandit doing his one armed wheelies.... since you asked, first, he gets a big fast bike that doesn't need any yanking on the bars.... then he mounts a clutch backwards behind the throttle on the right clip-on and removes the left one completely. God only knows how he coordinates it all, but once he's moving, I imagine he clamps the tank with his knees, winds on some power and lofts the front. He then fangs it down the street or track looking super bad-ass.(That's my guess based on photos on his profile.)
You should never be yanking on the bars. With enough convincing a decent 250 will pop a wheelie, but maintaining it will be tricky.
If you can get it up in second and maintain it, I would be happy with that, but I'd never try to change gears, there would be no point on a smaller cc bike.
Doing wheelies on gravel roads in top gear is fun....![]()
Jesus was nailed up to some wood, two thousand years later and book sales are still good
How to wheelstand your motorcycle KB style. 1st, apply to the "KB Politically Correct Police", disappointingly, a gang that are getting ever stronger on the once wild west KB. Then apply to the "KB Fun Police", make sure you say you promise to only have a minuscule bit of fun doing it, that will help your application no end. Then apply to the "Your Surely Going To Die Police", who's HQ is also based at KB. Be warned, all your applications will be forwarded to the "KB Grammarian Police" where the penalty for a dropped full stop will make looping your bike out look like a gentle relaxing massage in comparison.
Then take One Armed Bandits kind offer up, he knows what he is actually talking about.![]()
your so on the money reg, the fun, grammer, politically correct, your surely gonna die police on KB..!!!
sure some of the guys must know what they are talking about, but why oh why do they all seem like such knob ends where ever they jump on here to do their preaching... il have to hunt out this OAB guy and let him show me how its done, maybe i could try on his bike, mite be easier on a 1000 than my awesome 250 racing VT.. ;-)
So.... just to clarify, you asked for advice, you got given advice, and you bitch and complain when people tell you off about being a douche?
Have fun mouth breather.
I'm pretty sure you already know our mono-armed thou rider, but if not, you'll first have to get the hang of riding a bike with all the controls on the right hand bar.
Just go out and do wheelies fuck ya! You're getting as bad as the rest of us keyboard jokeys who can't remember how to start our bikes, let alone ride them.
If its so important to be on 1 wheel, buy a fuckin unicycle.![]()
For a man is a slave to whatever has mastered him.Keep an open mind, just dont let your brains fall out.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks