XR200 clutch nut tool

[eviltwin]

Hey Guys,

Just pulled my girlfriends bike apart to replace the gear shaft and found this stupid clutch nut which needs a special nut socket tool to remove the clutch basket to access the gear shaft.

I have tried to purchase or borrow one from Honda with no luck.

Does anyone here have one (in auckland) that I can borrow...will lay down some beers for the inconvenience.

Cheers!

[Motu]

Do what everyone else does - borrow a long socket off your best mate and grind the pegs into it to suit.

[actungbaby]

I got a few these of there on all honda singles i use a drift or hard edged piece metal or if really desprate
and old screw driver i found centre punch and dont worry if you dig into the nut just replace it and just make sure
you dont slip hurt the tread or your hands ;-)

Hey Guys,

Just pulled my girlfriends bike apart to replace the gear shaft and found this stupid clutch nut which needs a special nut socket tool to remove the clutch basket to access the gear shaft.

I have tried to purchase or borrow one from Honda with no luck.

Does anyone here have one (in auckland) that I can borrow...will lay down some beers for the inconvenience.

Cheers!

[LittleJohn]

Hope the tool works sweet. Let me know if you need anything else, might be able to help out.

John

Hey Guys,

Just pulled my girlfriends bike apart to replace the gear shaft and found this stupid clutch nut which needs a special nut socket tool to remove the clutch basket to access the gear shaft.

I have tried to purchase or borrow one from Honda with no luck.

Does anyone here have one (in auckland) that I can borrow...will lay down some beers for the inconvenience.

Cheers!