'70s trailbike bits

**Stylo** · 24th January 2012, 19:34

Some stuff I don't need any more... just having a clean-out

Suzuki 'Owners Manuals ' KT120 , TS250R and TS250J ..

Still in good nick and, not torn but a little faded ...as you'd expect .

Also got a set of DT360A forks , need refreshing and .....a DT360A Tank - condition 2/4 and no fuel tap - but original , dented.

DT360A Tail light ..unmarked and in the plastic bag.

Anything more I find I'll let you know ....

**Stylo** · 24th January 2012, 20:02

Here's some more , Yamaha service book from 1972 covering the RT1 - RT1-B, RT-2 RT1-MX , 130 pages in good nick and altogether .

'Glenns Yamaha' ( Cycle World magazine ) 1974, 160 pages plus Hardback and covering models from 90cc through to 360cc, good nick - ex library book .

Be nice to see these books go to someone who has an interest in these old girls ....

Take it easy ...

**nudemetalz** · 25th January 2012, 09:09

If you have a workshop manual for 1960's Yamaha single two-strokes (ie YG-1) I'd be keen.

**Stylo** · 25th January 2012, 18:24

Originally Posted by nudemetalz

If you have a workshop manual for 1960's Yamaha single two-strokes (ie YG-1) I'd be keen.

Sorry, Most of the stuff I have is Trailbike related and 1970 on ...if I see one I'll let you know

**eelracing** · 25th January 2012, 23:46

Originally Posted by Stylo

Also got a set of DT360A forks

Anything more I find I'll let you know ....

Mate are those forks 34mm? as i'm looking for some TS400 replacements

**Stylo** · 26th January 2012, 17:36

Originally Posted by eelracing

Mate are those forks 34mm? as i'm looking for some TS400 replacements

Yes 34mm, I should have added that the chrome on both is pitted and they'll both need new seals and a few $+ to bring them up to usable condition. I've got a mate at work who's brother is building a DT250 and I've offered them to him for 30 pinger which is probably top dollar having had another look at them and he'll let me know tomorrow. I'm residing in the shaky city too so there would be a freight component too to send them to Wanganui .

Nice to hear you've got a TS400 Apache ..go well

**eelracing** · 27th January 2012, 00:25

Originally Posted by Stylo

Yes 34mm, I should have added that the chrome on both is pitted and they'll both need new seals and a few $+ to bring them up to usable condition. I've got a mate at work who's brother is building a DT250 and I've offered them to him for 30 pinger which is probably top dollar having had another look at them and he'll let me know.

If the pitting aint in the sliding area but above the lower yoke i'm still interested coz i'm to cheap to get them rechromed.