Breather (oil) catch can

**Krayy** · 27th September 2012, 17:26

Hi all,

Anybody know where I could get hold of a fluid catch can, preferably aluminium (don't care about the colour ) so that I can finish my breather mod? It doesn't need to be large, less than 300 ml and needs to have 3/8 tube (or close enough) connectors on it. preferably with a petcock to drain the fluid from time to time.

Damned if I can find anyone who makes one in NZ for bikes, karts or other small engines.

Cheers.

**ducatilover** · 27th September 2012, 17:40

Make one.

**Akzle** · 27th September 2012, 17:52

looked at those after-market brake fluid reservoirs? come in all kinds of anodisation and or stainless. sizes about what you're after. may or may not need port enlarging. ^_-

**Banditbandit** · 28th September 2012, 09:23

Coca Cola and Sprite make some excellent ones .. a quick walk around the pits at a classic race meeting will show you how to set them up.

**skippa1** · 28th September 2012, 09:30

Originally Posted by ducatilover

Make one.

yup what ^ said.....more fun and makes you feel good when you look at the cool job you did

**imdying** · 28th September 2012, 09:43

Originally Posted by Banditbandit

Coca Cola and Sprite make some excellent ones .. a quick walk around the pits at a classic race meeting will show you how to set them up.

Those Red Bull aluminium bottles doing the rounds at the moment look like the win

**nodrog:Me** · 28th September 2012, 09:51

Originally Posted by imdying

Those Red Bull aluminium bottles doing the rounds at the moment look like the win

The aluminium Heineken® ones are way cooler.

**Paul in NZ** · 28th September 2012, 09:58

PVC Tube capped off with blank caps. Drill holes, Inlet pipe high up glued in (alloy tube from M10), atmosphere vent on top, drain vent with tap on bottom - cable ties job done.