race fairings in nz or aussie?

[tigertim20]

Just fairings do not have fairings for my model of bike.

who else supplies / makes them, freight is a killer from the states - just got quoted $600 freight alone from one place.

So where else do you guy get them? or anyone got some they wanna sell for a 2003-2004 cbr 600rr?

[onearmedbandit]

https://www.aliexpress.com/wholesale...r600rr+fairing

A lot of these places do free shipping to NZ. Typically the quality is decent, just the fitting can require a little tlc.

[mossy1200]

https://www.aliexpress.com/wholesale...r600rr+fairing

A lot of these places do free shipping to NZ. Typically the quality is decent, just the fitting can require a little tlc.

The ones on mine look ok but the fitting was not good. This was made worse by the previous owner also not being very good also. The belly pan paintjob caught fire on mine because the cat pipe was touching the fairing. I had to get a cat eliminator pipe.

If its a track only bike make sure your getting fibre not abs. Be prepared to only drill mounting holes after checking the location at least 6 times.

[tigertim20]

The ones on mine look ok but the fitting was not good. This was made worse by the previous owner also not being very good also. The belly pan paintjob caught fire on mine because the cat pipe was touching the fairing. I had to get a cat eliminator pipe.

If its a track only bike make sure your getting fibre not abs. Be prepared to only drill mounting holes after checking the location at least 6 times.

Yeah fibreglass is definitely my preference, I have a couple complete sets of oem fairings that, if I can't find fibreglass ones, I will weld up and use instead, but would rather not if I can avoid it