Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: Where to get stainless exhaust tube?

  1. #1
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851

    Where to get stainless exhaust tube?

    Does anybody know where I can buy a 200mm length of 2” stainless exhaust tube?

    I don’t want to buy a 6m length.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  2. #2
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    Steel and tube stainless do shorter lengths than 6m, iirc I got 2m of 38mm for about a hundy bucks, worth ringing them first, then try some muffler shops. Failing finding a GC kbr on here of course.
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

  3. #3
    Join Date
    2nd October 2011 - 19:50
    Bike
    2000 Honda Hornet 600
    Location
    Auckland
    Posts
    2,428
    Quote Originally Posted by nzspokes View Post
    Does anybody know where I can buy a 200mm length of 2” stainless exhaust tube?
    I don’t want to buy a 6m length.
    Check with Mike aka Monkfish...
    ---------------------------------------------------------------------------
    Your beliefs don't make you a better person, your behaviour does.

  4. #4
    Join Date
    3rd October 2004 - 15:45
    Bike
    Africa Twin DCT.
    Location
    Australia 4507
    Posts
    1,450
    I used to get all manner of stainless items off Tube Bending Ltd in East Tamaki.
    Very reasonable pricing too.

    http://www.tubebending.co.nz/

  5. #5
    Join Date
    1st November 2005 - 08:18
    Bike
    F-117.
    Location
    Banana Republic of NZ
    Posts
    7,048
    Also try Stainless Bending Ltd. Industry Rd, Penrose.
    TOP QUOTE: “The problem with socialism is that sooner or later you run out of other people’s money.”

  6. #6
    Join Date
    13th October 2011 - 19:12
    Bike
    2008 Suzuki GSXR 1000
    Location
    Havelock North, New Zeala
    Posts
    113
    citysteel.co.nz

    They manufacture both motorcycle/stock car and car performance exhausts so wil make up anything you need/want.

    Issue is they are in Hastings so you will need to pay for postage of it.....any steel engineering shop should be able to make something up for you thought?

  7. #7
    Join Date
    1st May 2011 - 12:35
    Bike
    XT660R / TTR250 / 2 old Montesa's
    Location
    Blenheim.. now ChCh
    Posts
    1,803
    Mico Metals will cut down to 1 metre

    http://www.google.co.nz/url?sa=t&rct...50500085,d.dGI
    Pete

    90% of all Harleys built are still on the road... The other 10% made it back home...
    Ducati... Makeing riders into mechaincs since 1964...

  8. #8
    Join Date
    17th February 2005 - 11:36
    Bike
    Bikes!
    Location
    Christchurch
    Posts
    9,649
    Most exhaust shops will have off cuts of stainless. Most don't use it as a rule, so they buy it in, but should have an offcut.

  9. #9
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851
    Quote Originally Posted by imdying View Post
    Most exhaust shops will have off cuts of stainless. Most don't use it as a rule, so they buy it in, but should have an offcut.
    Apparently not. Have tried heaps.

    Thanks for the other suggestions, my hunt will resume Monday.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  10. #10
    Join Date
    15th October 2005 - 15:54
    Bike
    Nada
    Location
    Christchurch
    Posts
    4,311
    Have a bunch of old stock exhausts laying about so should have their link pipes too that may suit

  11. #11
    Join Date
    8th January 2013 - 20:18
    Bike
    2006 Suzuki Hayabusa
    Location
    North Shore, Auckland
    Posts
    859
    Quote Originally Posted by bogan View Post
    Steel and tube stainless do shorter lengths than 6m, iirc I got 2m of 38mm for about a hundy bucks, worth ringing them first, then try some muffler shops. Failing finding a GC kbr on here of course.
    You got ripped off bro. Last 6m length of 38.1mm cost be less than 100 bucks from Tatasteel. I would Def give them a email spokes. I buy off cuts from them all the time.
    STAParts are the best bang for buck when it comes to low cost stuff. Aint the worlds best finish but it does the trick and its nice and light.

  12. #12
    Join Date
    24th July 2006 - 11:53
    Bike
    KTM 1290 SAR
    Location
    Wgtn
    Posts
    5,541
    Quote Originally Posted by nzspokes View Post
    Apparently not. Have tried heaps.

    Thanks for the other suggestions, my hunt will resume Monday.
    Mico metals or Tata steel will both sell you cut pieces.

    If it's for an actual zorst specify grade 304.
    Go soothingly on the grease mud, as there lurks the skid demon

  13. #13
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851
    Quote Originally Posted by DMNTD View Post
    Have a bunch of old stock exhausts laying about so should have their link pipes too that may suit
    Have you got one to suit a low mount exhaust on a Hornet?
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  14. #14
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851
    Quote Originally Posted by The Reibz View Post
    You got ripped off bro. Last 6m length of 38.1mm cost be less than 100 bucks from Tatasteel. I would Def give them a email spokes. I buy off cuts from them all the time.
    STAParts are the best bang for buck when it comes to low cost stuff. Aint the worlds best finish but it does the trick and its nice and light.
    I tried STA and they said they dont do it.

    I struggle to go far from work during the week to go to other suppliers.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  15. #15
    Join Date
    15th October 2005 - 15:54
    Bike
    Nada
    Location
    Christchurch
    Posts
    4,311
    Quote Originally Posted by nzspokes View Post
    Have you got one to suit a low mount exhaust on a Hornet?
    Fuck knows man. Exhausts from Kawasakis,Yamaha through to MV,Ducati and Aprilia.
    I'll have a squizz tomorrow

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •