Kawasaki S2 350 owners - anyone local with some pipes I can compare?

[neil_cb125t]

So Im doing up a S2a 350 triple, and have about 18 mufflers to chose from (literally) but I want to make sure that they are correct as I hear the 250 and 350 and 400 pipes are different. if anyone has a bike or genuine mufflers in a garage somewhere id love to compare them

[pete376403]

have you checked the online parts manuals at Kawasaki.com? Do the mufflers have part numbers on them?

[neil_cb125t]

have you checked the online parts manuals at Kawasaki.com? Do the mufflers have part numbers on them?

Na no numbers on the mufflers unfortunately...... Each model S1/S2 does have different part numbers....

[GrayWolf]

So Im doing up a S2a 350 triple, and have about 18 mufflers to chose from (literally) but I want to make sure that they are correct as I hear the 250 and 350 and 400 pipes are different. if anyone has a bike or genuine mufflers in a garage somewhere id love to compare them

Different part numbers dont always mean a different part... Yamaha do it all the time, example FJ1200 clutch master, same part as the original V-max one (identical) different numbers.


Advice, check the diameter of the downpipes, see if they are different between the models..... (remember Kwak DID detune them and altered the baffles some over the few years).....
if downpipes are the same? Check baffle length, size construction... I'm going to bet that the 250/350 ones WILL be identical.

not sure if the bore, or stroke was changed on the 400, I THINK the stroke, in which case there will be a very slight difference when you try to bolt them on......