Where to buy perforated exhaust tubing??

[XTC]

Where to buy perforated or louvered exhaust tubing in auckland?? Preferably south auckland. Any ideas? Need 38mm or 35mm.

[dss3]

You have a "coby exhausts" up there? I jsut got some 2" perf. exhaust tube today to modify the pipes on the R1. $15/m.

[myvice]

Try Wolf Mufflers, there in Auckland, on Dominion Rd (Auck end)
Or go nuts with a drill!

[HDTboy]

I recommend Woolf muflers too

[XTC]

But do ya think they'd stock 38mm? Not really a car sizing such as 2".

[geoffm]

Papakura engineering (South Auckland) stock a variety of sizes, or used to a while back.
Geoff

[XTC]

Papakura engineering (South Auckland) stock a variety of sizes, or used to a while back.
Geoff

Thanks Geoff. I'll give them a buzz tomorrow and ask.

Any others that anyone know of??

[TLDV8]

The perf tube they use in automotive mufflers is at least 1.6 to 2mm wall so it is ultra heavy and normally louvered ..am trying to think of the place in East Tamaki that makes thin punched perf tube,you could try giving Tube Benders in Cryers Road a ring,they should know..if you are not worried about weight then the place in Maurice Road will sell you some,same again,forgot the name but they are on the left,down a drive at the top of the hill from the Church St end.

[cowpoos]

get a small cut out of perforated sheet....stainless prefferable....and roll it yourself....be cheaper and its easy

[XTC]

Papakura engineering (South Auckland) stock a variety of sizes, or used to a while back.
Geoff

I rung Papakura Engineering this morning and the only size they have left was 38mm Yee Haaa! I went and got half a metre of their dusty cobweb ridden perforated pipe and viola my zorst is all go!! Thanks lion red!