Alarm Installation

**placidfemme** · 15th September 2005, 09:27

Hi all

I was wondering if anyone out there would be happy to help me install an alarm on my bike. I brought the alarm off TradeMe so it's not a big flash expensive alarm, but will still do the job.

I have no electrical/wiring type experience, and the instructions on installation make no sense to me (plus the translation isn't that great).

If anyone is keen to help me out, I'll be happy to pay for gas (if you wanna come over to my place... but I have no tools) and also shout some beers or something

Thanks in advance

**WildBoarMouse** · 15th September 2005, 14:23

If you can find a wiring diagram I can probably help out on sunday some time. Even if you can't find the diagram, it shouldn't be too hard to track down the different feeds that it requires. Can you please post the manual to the alarm here?

Regards
Darcy

**bugjuice** · 15th September 2005, 14:48

don't mind having a look if WBM can't after all.. can't be too hard..

**BNZ** · 15th September 2005, 14:55

Originally Posted by WildBoarMouse

If you can find a wiring diagram I can probably help out on sunday some time. Even if you can't find the diagram, it shouldn't be too hard to track down the different feeds that it requires. Can you please post the manual to the alarm here?

Regards
Darcy

I installed one on my ZXR250C and I have the wiring diagram for the bike if needed.

**WildBoarMouse** · 15th September 2005, 15:29

Originally Posted by BNZ

I installed one on my ZXR250C and I have the wiring diagram for the bike if needed.

Is there any chance you could post a copy of that here please? For whoever ends up helping out it would certainly speed things up a lot!!!

**placidfemme** · 15th September 2005, 16:06

Hi thanks for the offers of help

I don't have a wiring diagram for my bike I havn't got any paper work or anything actually lol... just my rego stuff).

Would you like me to have the instructions scanned and posted on here? I will also get the alarm name and details tomorrow...

Thanks again for the offer

**SPORK** · 15th September 2005, 16:17

I'm pretty sure John did his. PM him?

**placidfemme** · 15th September 2005, 16:25

Originally Posted by OMGWTFBBQ

I'm pretty sure John did his. PM him?

Yeah it was John who talked me into buying the alarm, and promised to come and install it... that was about... 3+ months ago

**unhingedlizard** · 15th September 2005, 17:09

would be happy to help out xcept im waikato. If you wanna ride down the weekend would be happy to help. Otherwise good on ya for getting your premiums down

**WildBoarMouse** · 16th September 2005, 07:03

Originally Posted by placidfemme

I don't have a wiring diagram for my bike I havn't got any paper work or anything actually lol... just my rego stuff).

Would you like me to have the instructions scanned and posted on here? I will also get the alarm name and details tomorrow...

Thanks again for the offer

Yep! If you could please scan the instructions that'd be great.

Always helps to have a look in advance. You can email me at work if you want to arrange a time on Sunday... darcywatoscmar_dt_co_dt_nz

**John** · 16th September 2005, 07:04

Originally Posted by placidfemme

Yeah it was John who talked me into buying the alarm, and promised to come and install it... that was about... 3+ months ago

oi you - actually am working all weekend so I cant help again, I can post details instructions/walkthrough for anyone that just wants to run around and do it, maybe a 20minute job max?..

**scooterboynz** · 16th September 2005, 07:05

what model /brand is it? i put a "gorrilla" alarm in my bike

**John** · 16th September 2005, 07:13

Originally Posted by placidfemme

I don't have a wiring diagram for my bike

It should be on that CD I sent you..

"15-electrical-system.pdf"

page: 23 "Ignition System".

To anyone who does it, you will find that the wires are the wrong colors think its a year difference, but all you need is a multimeter and you can find what you want fairly easy...

The bike has a postitive igniter...

**placidfemme** · 16th September 2005, 07:31

Originally Posted by John

It should be on that CD I sent you..

"15-electrical-system.pdf"

page: 23 "Ignition System".

To anyone who does it, you will find that the wires are the wrong colors think its a year difference, but all you need is a multimeter and you can find what you want fairly easy...

The bike has a postitive igniter...

thanks for posting that John... yeah that CD you sent me...

I don't have a comp at home and work has removed the CD players/burners from the PC's because someone was stealing data last year and selling it to our rival company... so I havn't even been able to look at the CD yet...

Ok the Alarm is:

Cyclone - Model C-9

As soon as our graphics chick gets in I'll ask her to scan the small instruction manuel and post it on here