Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Who would you recomend to service GSXR

  1. #1
    Join Date
    29th September 2005 - 06:39
    Bike
    GSXR1000K4
    Location
    Mt Roskill
    Posts
    23

    Who would you recomend to service GSXR

    Hi peeps, I am new to Auckland, wheres a good place to take my GSXR ? its due for a service.

    Ricky

  2. #2
    Join Date
    28th July 2004 - 12:00
    Bike
    justsomebike
    Location
    justsomeplace
    Posts
    4,586
    HI mate,

    Motohaus Tyres
    815 83 84.

    Kerry is most likely one of the best. But also bloody busy

  3. #3
    Join Date
    29th September 2005 - 06:39
    Bike
    GSXR1000K4
    Location
    Mt Roskill
    Posts
    23

    Re Motohaus

    Quote Originally Posted by justsomeguy
    HI mate,

    Motohaus Tyres
    815 83 84.

    Kerry is most likely one of the best. But also bloody busy

    thanks is he a suzuki dealer ?

    Ricky

  4. #4
    Join Date
    28th July 2004 - 12:00
    Bike
    justsomebike
    Location
    justsomeplace
    Posts
    4,586
    Quote Originally Posted by Random
    thanks is he a suzuki dealer ?

    Ricky
    No he's not - just got heaps of experience fixing bikes - and he's honest.

    http://www.colemans-suzuki.co.nz/ is the local suzuki dealer - SARGE on this site works for them.

  5. #5
    Join Date
    10th December 2002 - 20:52
    Bike
    Kawasaki ZRX1200R
    Location
    Napier, New Zealand, New
    Posts
    637
    I've never had a bad job done at Colemans.
    Never had a bad job done at Kerry's either.

  6. #6
    Join Date
    17th June 2005 - 13:51
    Bike
    Whatever is in the garage - FXDC, Bking
    Location
    Kerikeri - Dunedin
    Posts
    3,410
    Blog Entries
    7
    Colemans are a good lot. I've had a bad experience with a Suzuki dealer on the shore (yeh, we all know who I'm talking about, just wish not to name...) I asked for a quote for a 2005 GSXR1000 first service. Was told approx $135 give or take. When I picked up the bike they charged $230, I complained about the wide difference with the quote and they dropped it to $195. I paid up and grumped off. To make things even more annoying I had to chase up the warranty book, the hadn't even bothered to fill it in. They had actually LOST the book..... It's funny to think that we had only bought the bike from them two weeks prior............. People hear alot about good reps but when it comes to a bad rep, it sticks and it doesn't budge for a long time.

    Ok I've had me winge...

    www.Ridertraining.co.nz
    NZTA Approved CBTA Instructor Assessor
    - Restricted + Full Licence Training & Testing
    - Onroad Coaching & Training
    Auckland
    Call or Txt 0210334766
    info@ridertraining.co.nz

  7. #7
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Hey mate, I highly recommend Colemans Suzuki (i would say that though wouldnt I???) on the corner of Grundy street and K'Rd... They are very busy, but do a good job

    Personally i dont like Cyclespot or Holeshot...
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  8. #8
    Join Date
    6th November 2004 - 14:34
    Bike
    SUZUKI TR50 STREET MAGIC
    Posts
    2,724
    IF YOU WANT TO KEEP YOUR WARRANTY YOU NEED TO TAKE IT TO A SUZUKI DEALERSHIP, COLEMANS AND HALDANES ARE BOTH ACCEPTABLE

  9. #9
    Join Date
    27th May 2004 - 12:00
    Bike
    RSVR-BICILINDRICO
    Location
    V2- PROJECTILE
    Posts
    2,788
    Shame you live up there as My man Jason Nairn at NPMC is the shit Knows his GSXR's Races a SV650 pretty bloody Quickly to Ask Two-Smoker

    SENSEI PERFORMANCE TUNING

    " QUICKER THAN YOU SLOWER THAN ME "

  10. #10
    Join Date
    28th July 2004 - 12:00
    Bike
    justsomebike
    Location
    justsomeplace
    Posts
    4,586
    Quote Originally Posted by WINJA
    IF YOU WANT TO KEEP YOUR WARRANTY YOU NEED TO TAKE IT TO A SUZUKI DEALERSHIP, COLEMANS AND HALDANES ARE BOTH ACCEPTABLE
    Stick to these two then - they both have decent reps. Have only dealt with Colemans and they seem fine, dealt with them several times.

    They missed out shagged wheel bearings while swapping tyres.......but it was a rush job - and they dropped everything to finish the job when I just turned up at random. - I appreciate that.

    Corner of K'Rd and Gundry. Drop in and tell Sarge I called him a fat bastard

  11. #11
    Join Date
    21st July 2005 - 12:00
    Bike
    92 Yamaha FJ1430A
    Location
    Nana Republic
    Posts
    2,543
    Blog Entries
    23
    Quote Originally Posted by justsomeguy
    Corner of K'Rd and Gundry. Drop in and tell Sarge I called him a fat bastard

    he dont have to.. i can read weasel-dick


    you're on the menu jackass
    Life is tough. It's tougher when you're stupid

    SARGE
    represented by GCM

  12. #12
    Join Date
    3rd September 2005 - 08:19
    Bike
    .
    Location
    .
    Posts
    3,712
    If any one really wants to see the worlds fastest indian, then watch JSG go when a hungry Sarge is chasing him on the FJ.......................

    I know who my moneys on........(I'll give you a hint...he's a tubby bitch )

  13. #13
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by Sensei
    Shame you live up there as My man Jason Nairn at NPMC is the shit Knows his GSXR's Races a SV650 pretty bloody Quickly to Ask Two-Smoker
    Yep i can vouch for that....
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  14. #14
    Join Date
    28th July 2004 - 12:00
    Bike
    justsomebike
    Location
    justsomeplace
    Posts
    4,586
    Quote Originally Posted by SARGE
    he dont have to.. i can read weasel-dick


    you're on the menu jackass
    Quote Originally Posted by The_Dover
    ...he's a tubby bitch )
    You learnt to read Tubby bitch???


    Congratulations

  15. #15
    Join Date
    27th July 2004 - 00:36
    Bike
    NC700X XR250 MTS1200
    Location
    Auckland, NZ
    Posts
    3,275
    Blog Entries
    2
    why is there 2 plastic pop out revits missing after I had my bike repaired at Colemans?

    Are they just too busy or what....
    newbie since August 2004....
    VTR250 (retired) / SV650S (Fw:Keystone19) / GSXR750(given up) / CB400(traded for 919) / CB900 Hornet / CBR954 (traded) / CBR1100XX (sold) / TuonoR (sold) / CB900 Hornet / NC700X / MTS1200 / XR250

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •