The oxford heated grip on my throttle has decided to part company with the throttle sleeve thingee itself, resulting in some unintentional spirited revving. What's the best glue for reattaching?
The oxford heated grip on my throttle has decided to part company with the throttle sleeve thingee itself, resulting in some unintentional spirited revving. What's the best glue for reattaching?
You have the right to remain silent. Anything you say will be quoted out of context, then used against you.
Gib fix. The green one. Worked for me...
Only a Rat can win a Rat Race!
Medium bond two part epoxy is what I've typically used, but even then with repeated/prolonged use it can still work loose. But to be fair it's lasted longer than the superglue type of stuff that normally comes with the hotgrips kit.
They usually say epoxy so araldite is what I use. Can get longer cure version which could be stronger than 5 min.
Don't you look at my accountant.
He's the only one I've got.
Thanks folks will pick some epoxy up
You have the right to remain silent. Anything you say will be quoted out of context, then used against you.
IMO, you prob are better off with a glue that sets with a bit of give in it so can move with the pressure etc. araldite sets quite hard, and is an awesome glue for many things but you may be better off with one of the ados products. I say that cos you can get it in smaller amounts...
Only a Rat can win a Rat Race!
I used to use F2 ADOS on plain grips which wet, works great, but my Daytona heated, said epoxy, so I complied like the good little bitch I am.
Don't you look at my accountant.
He's the only one I've got.
A glue called "Grip Glue". Made for the sole purpose of what you are trying to achieve. Available from motorcycle shops when I last bought a tube in 2011.
TOP QUOTE: “The problem with socialism is that sooner or later you run out of other people’s money.”
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks