Results 1 to 8 of 8

Thread: fitting different zorst...???

  1. #1
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162

    fitting different zorst...???

    i want to fit a reverse megaphon can to my spada. will it loose back pressure? it has a collector box if that helps. i will need to cut the existing can off and weld the megaphone on...
    also will i need to re-jet the carbs? and will there be much power gain or loss?

    cheers guys and gals
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  2. #2
    Join Date
    8th November 2004 - 11:00
    Bike
    GSXR 750 the wanton hussy
    Location
    Not in Napier now
    Posts
    12,765
    Quote Originally Posted by ducatilover
    i want to fit a reverse megaphon can to my spada. will it loose back pressure? it has a collector box if that helps. i will need to cut the existing can off and weld the megaphone on...
    also will i need to re-jet the carbs? and will there be much power gain or loss?

    cheers guys and gals
    Increasing the exhaust flow (derestricting) will almost always require a similar derestricting to the air/fuel flow, otherwise the engine will run too lean. Fit a hi-flow airfilter & larger jets. There will be a small difference in power (up) but not enough to take on a ZXR250 and win....
    Do you realise how many holes there could be if people would just take the time to take the dirt out of them?

  3. #3
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by MSTRS
    Increasing the exhaust flow (derestricting) will almost always require a similar derestricting to the air/fuel flow, otherwise the engine will run too lean. Fit a hi-flow airfilter & larger jets. There will be a small difference in power (up) but not enough to take on a ZXR250 and win....
    sweeeeeet....so if i get two small pod filters....and get a mate to re jet her.... will i loose any low down?
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  4. #4
    Join Date
    8th November 2004 - 11:00
    Bike
    GSXR 750 the wanton hussy
    Location
    Not in Napier now
    Posts
    12,765
    Quote Originally Posted by ducatilover
    .... will i loose any low down?
    Pass....I'd suspect that performence enhancement would be across the rev.range, but don't quote me.
    Still won't beat a ZXR (you seemed to miss that one, mate)
    Do you realise how many holes there could be if people would just take the time to take the dirt out of them?

  5. #5
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by MSTRS
    Pass....I'd suspect that performence enhancement would be across the rev.range, but don't quote me.
    Still won't beat a ZXR (you seemed to miss that one, mate)
    you havent seen my super nitros kit.... okay i can handle it wont beat a zxr in a straight line! but if my bike sounds good then who cares?
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  6. #6
    Join Date
    18th October 2005 - 16:47
    Bike
    Bandit 250(for sale), 636
    Location
    Wellington
    Posts
    1,954
    ive got a cycleworks exhaust on my bandit, new airfilter (havnt looked to see if its stock or what), and its been rejetted.

    and she sounds a beaut, louder than most of the larger cc bikes i ride with
    1990 Suzuki Bandit GSF 250 for sale 39k kms $3,500

  7. #7
    Join Date
    4th January 2005 - 18:50
    Bike
    Massey ferguson 7495 dyna-vt
    Location
    Norfland
    Posts
    6,917
    Quote Originally Posted by ducatilover
    sweeeeeet....so if i get two small pod filters....and get a mate to re jet her.... will i loose any low down?
    alot better off with a airbox dude....pod filters hav to much air moving around them...bikes like to draw still air from a good volume airbox....it also makes for a smoother running engine...
    Quote Originally Posted by Drew View Post
    Given the short comings of my riding style, it doesn't matter what I'm riding till I've got my shit in one sock.

  8. #8
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    thanks poos
    im thinking about doing something never done to a vt250 spada before.....


    supercharged.....


    but thats just a dream for now
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •