Anyone know a disributor for dirt bike clutches?>

[B0000M]

as im a tight arse, and dont feel like paying ridiculuois prices from my local ripoff bike shop, does anyone know any names of any national distributors or alternative well priced place to get a clutch kit for a CR125?

[merv]

Have you tried Malcolm at Econohonda http://www.econohonda.co.nz/ ?

[Brian d marge]

let me know what you find out , plates are about 800 yen each springs about 240 yen each

Though the killer is the postage, as we found out with another KB member up to 2 kg and is about 3000 yen ( for 1.6kg ~)and took about 15 days ,,, ( slow this time , poss because christmas~) that really was the cheapest way

So you (from Japan Honda parts) are looking at around 9000 yen from Japan ..

Surely there must be someone like budgets in CHCH , who are very reasonable ??

BTW DONT USE harder springs in the 125 as the 1st gear is machined onto the shaft and the clutch is designed to give that gear an easier life ...( u can use the harder springs ,,, and it will be ok ...for a while .... but the downside is ,,,its hard on the hands ,, the wire dia and freelength is small(er) on the 125 springs

Stephen