Odd fairing fastener

[Toast]

Does anyone know where to get a fastener such as the one in the attached pic?

It's the typre that bites on to a piece of wire when you turn it.

I'm not too worried about the head type, slot or hex.

Cheers.

]

[vifferman]

That looks like a fairly conventional Dzus fastener, in a fairly unconventional colour. You can buy Dzus fasteners from most bike shops, in a set with the bolt and socket, for around $19, IIRC.

[Pixie]

EDL Fasteners Ltd - Head Office. 70 Richard Pearse Drive Airport Oaks Auckland. PO BOX 12-438 Penrose Auckland 1642. Ph (09) 579-0080. Fax (09) 579-0850
Branches all over
Won't rip you off as much as a bike shop

[degrom]

http://www.4-motorcycles.co.uk/acata...ing_bolts.html
http://www.amcmotorcycles.com/
http://www.bsr-aerotek.com/store/pro...oducts_id=2158

Have a look on these site... Maybe,maybe not...

[Matt Bleck]

I got some not long ago from Ric At Corsa M/Cycles.

http://www.kiwibiker.co.nz/forums/sh...highlight=Dzus

[Toast]

Thanks guys, I'll give Corsa a go. My fairings already have wire welded on to the inside, so all I need is the screw/bolt. Hopefully he can provide that.

[Crisis management]

If Corsa can't do them try EDL in Fairfax ave? Penrose, not too far from Corsa....

[vagrant]

My RC30 has the same sort of things, in stainless, with a flat blade screwdriver slot and a foldout wire bail so you can use then without getting out the toolkit.
They have a pair of teflon washers to hold them onto one part of the fairing and stop it scratching the other piece.