http://cgi.ebay.co.uk/VFR-400-RVF-CB...a5951bef0#shId
Shorty levers for VFR for 31GBP. Worth the risk?
Marquis
http://cgi.ebay.co.uk/VFR-400-RVF-CB...a5951bef0#shId
Shorty levers for VFR for 31GBP. Worth the risk?
Forum whore
the leads on my NC35 are inseperable from the coils - and as some kind fuckwit didn't put on of the leads on properly in the past i'm now running an NC30 coil/leads in place of the damaged unit. been fine for over 12 months of daily commuting now....Originally Posted by monkey99
Can anyone provide advice on a couple of subjects?
A) HT Lead replacement for RVF 400 NC35 '96
B) Recommend a road/sport rear shock unit with adjustable ride height
C) recommend rearsets
any help would be good
Also have serious (& seal damageing) pitting on front stanchions so ideas & costs for a grind rechrome, new stanchions or what would be good full shock replacement would be cool
cheers
probably would have helped if you mentioned they were NC30 forks then
rechrome etc is about $300, but i can't remember where that quote came from....
I'd suggest you get the proper front end seeing as you're looking for a decent rear setup also
Forum whore
why bother? I've seen "normal" levers on trademe for less than 20 bucks.... cycletreads might have those shorty ones available anyway so consumer guarantees etc for around the same price
Marquis
More leverage, less knuckle crushing lol.
I might go see ct and see what it would cost, although I was looking at geniune pazzos in suzuki/triumph for 150 each lever
Marquis
Does anyone know where I can get a NC30 screen brace? I walked into one of my mirrors a while ago and "twang"
Thanks.
Forum whore
something wrong with your clutch?
you mean those metal frame things that are a mission to find even genuine?Does anyone know where I can get a NC30 screen brace? I walked into one of my mirrors a while ago and "twang"
if you find a straight one without buying a whole new bike, TELL US
"channellling the Pleideans"
Tyga do a re-pop one dont they? or is that just for their fairings. Ive seen a screen brace on tardme before.
I thought elections were decided by angry posts on social media. - F5 Dave
Marquis
Yeah, when I went did a coro loop with two other NC30s I could see their perfect screen braces
I've emailed econohonda so I'll see what that's like.
Marquis
$112 + frieght
Likes a good argument...
Yeah, the brace is perfect on mine, but the right hand side bolt seems to be stripped out in the frame though... Need to pull it out and helicoil it.Yeah, when I went did a coro loop with two other NC30s I could see their perfect screen braces
I've emailed econohonda so I'll see what that's like.
Forum whore
check before you buy (not that you can tell if it's not on the bike)$112 + frieght
I went to get a tank from them and after driving all the way there both tanks had crash damage
on my old viffer I managed to bend mine back into shape pretty well using a long pipe and a LOT of patience, but no such luck on the riffer.
Also, some fibreglass fairings just aren't very good.
"channellling the Pleideans"
My 35GBP footrests and hangers and stuff arrived yesterday. They look all right, particularly for the money. I was pissy because I thought I had ordered silver and got black, but on checking I ordered black by mistake. They'll be fine for my use (spares for the trackbike).
If I remember I will bolt them up on my other VFR and take a snap
I thought elections were decided by angry posts on social media. - F5 Dave
Marquis
Na I have original fairings. I'm going to attempt to get it welded again.
I've had a very average service from econohonda but their response time is pretty good. But 112.50 for a gear lever
Marquis
Awesome! I'd love to know what you think of the quality and fit?
"channellling the Pleideans"
I need a wiring loom complete (for an NC30) if anyone has a spare. And maybe a CDI
I thought elections were decided by angry posts on social media. - F5 Dave
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks