Selling some bits on trademe :-
SW Motech Givi box adaptor
http://www.trademe.co.nz/Browse/List...x?id=477944818
Eagle Screen
http://www.trademe.co.nz/Browse/List...x?id=477945459
There's also a Shoei Hornet DS size small and a Givi box Maxia going cheap too.
Maybe I should buy the eagle screen? :-)
happy with my commuting setup see pic from-Britton-Mohaka-Adv-ride- http://www.kiwibiker.co.nz/forums/sh...ghlight=mohaka
cheers
This one is black ABS. (scored an offcut :) )
Folds done by one of my customers this time as can't get access to the strip heater until Gav gets back from France. Thanks to Scott at Showerking!!
Here's my effort...
I used some "artistic licence" and made it a bit taller than the template. The lines aren't as crisp as yours Pikey, but I'm sort of almost happy with it If I can locate a strip heater I may have another crack, as the heat gun heats up far to much area.
Custom washers/spacers too
Great effort with a heat gun!!!
I used the 20mm custom spacers
I didn't use spacers at all...
To make a quick easy Stip heater...
Arc welder & some 8g fence wire..
Or any wire or small Dia steel rod around 3mm will do..
just put the earth & rod holder on each end
then dial the amps up till yer get heat from the wire
with out melting it..
lay it in a bit of wood with a 10mm deep skill saw cut down it..
Pete
90% of all Harleys built are still on the road... The other 10% made it back home...
Ducati... Makeing riders into mechaincs since 1964...
Hi Guys. I’m new here but not new to riding. I have picked up a DR650 and I am enjoying it very much. I have fitted up a bash plate and some side racks for soft bags, a small Godiva screen, a carrier and raised the bars up a bit, and a Cycleworks muffler. I am going to the exhaust grind. I’m thinking on a Pumper type carb to wake it up a bit more, and a larger tank. Any thoughts?
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks