Results 1 to 11 of 11

Thread: 1999 dr650se parts wanted

  1. #1
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530

    1999 dr650se parts wanted

    looking for a belly plate,tail light, number plate holder and light,what ever you have i might need (bought a rough one looking at getting her back on the road with a tight budget).cheers Deano.

  2. #2
    Join Date
    15th February 2006 - 15:25
    Bike
    Orange ones! (and a few others...)
    Location
    Auckland
    Posts
    2,970
    Before you go too far, make sure it is possible to register the bike here. If it was sold new in NZ it should be achievable but there are a number of american imports here (speedo in MPH) that, unless you have all the import documentation, are impossible to register here. (speaks from experience!)

    Other than that I don't have any parts, but the wrecker in Rotorua (Andersons?) wrecked one not too long ago and he's good to deal with.

    Good luck!

  3. #3
    Join Date
    16th February 2005 - 11:00
    Bike
    .......?
    Location
    Auckland
    Posts
    811
    I can source a rear rego plate, light holder guard thingy. Can also get fork gaiters.

  4. #4
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530
    Quote Originally Posted by Crisis management View Post
    Before you go too far, make sure it is possible to register the bike here. If it was sold new in NZ it should be achievable but there are a number of american imports here (speedo in MPH) that, unless you have all the import documentation, are impossible to register here. (speaks from experience!)

    Other than that I don't have any parts, but the wrecker in Rotorua (Andersons?) wrecked one not too long ago and he's good to deal with.

    Good luck!
    took your advice and checked it out,aaaaaarrrrrrrrr f*#@+k,thanks you just saved me quite a few extra $$$$,i'm absolutly gutted ,i've sent out some emails to try and trace back to the original owner ,bit of a long shot but you never know he might have the import papers filed some where,fingers are crossed. If i cant get her regoed i'll use her for MX.

  5. #5
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530
    Quote Originally Posted by chris View Post
    I can source a rear rego plate, light holder guard thingy. Can also get fork gaiters.
    thanks chris, will see how i get on with the rego first.

  6. #6
    Join Date
    16th February 2005 - 11:00
    Bike
    .......?
    Location
    Auckland
    Posts
    811
    Quote Originally Posted by dino3310 View Post
    If i cant get her regoed i'll use her for MX.
    Errr, excuse me? MX?

    I've just been out to the Sandpit (Woodhill) for a shufty at the new facilities and put in a lap of the convict track and semi-constructed MX track on my DR. Poor old girl didn't know what had hit her!

  7. #7
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530
    only place i can ride at the moment,my mate picks me up on his way,
    i can get round patetonga on the DR better than i can on his rmz250 ,
    i dont like these light weight rockets,the DR got smoother power delivery
    more torque, less gear changing plus im just cruising injoying the ride, i,m just use to the bigger thumper,plus i got no choice till i can save some more $$ for a road worthy one.

  8. #8
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530

    Talking

    Quote Originally Posted by chris View Post
    Errr, excuse me? MX?

    I've just been out to the Sandpit (Woodhill) for a shufty at the new facilities and put in a lap of the convict track and semi-constructed MX track on my DR. Poor old girl didn't know what had hit her!
    actually the more i think about it the keener i get,one for the road and one for the track. work the motor, ohlins shocks i reckon i could get her in the top ten on club days,it would eat the mercer sand trap.could be a columb
    for KR,i could be the first to get sponsered on one for mx (did i mention i dream alot)

  9. #9
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530
    Quote Originally Posted by dino3310 View Post
    took your advice and checked it out,aaaaaarrrrrrrrr f*#@+k,thanks you just saved me quite a few extra $$$$,i'm absolutly gutted ,i've sent out some emails to try and trace back to the original owner ,bit of a long shot but you never know he might have the import papers filed some where,fingers are crossed. If i cant get her regoed i'll use her for MX.
    The guy i bought it of said he got it from a bloke in henderson auckland but cant remember his name, so if the bloke in henderson
    is reading this give us a buzz or if someone might recall the bike let me know,any info would be apreciated the bike is:
    1999 SUZUKI DR650se chassis no JS1SP46A2X2100511
    it is an american import.

  10. #10
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530
    sorted owner saw thread,but still unable to rego at this stage

  11. #11
    Join Date
    15th August 2006 - 17:33
    Bike
    2001 R1150GS
    Location
    South Taranaki
    Posts
    5,530
    turns out compliance wont let the bike vinn without original import papers,
    so im just gonna get the torque limiter put in give her a service and sell her on.would love to keep her as shes a bit faster than a standard DR but i plan to do 70% on road, cant offord two bikes so out she goe's, anyway thanks for your help guys its good to know where in a community that helps each other out. RIDE ON

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •