Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: Bike not running right

  1. #1
    Join Date
    2nd October 2005 - 00:47
    Bike
    CR250
    Location
    Papamoa
    Posts
    3,993

    Bike not running right

    My bike was not running quite right and felt a bit sluggish the other weekend, so I thought I'll repack the pipe and check the plug and if I can be bothered a recon.

    I found the plug quite black and quite alot of carbon build up. The muffler has a bit of oil over it at teh end of each ride too so I think its running a bit rich.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	sparkplug.jpg 
Views:	38 
Size:	201.0 KB 
ID:	81226  

  2. #2
    Join Date
    21st February 2007 - 12:23
    Bike
    RM250, Kx125
    Location
    auckland
    Posts
    558
    probably a silly query, but have you just tried cleaning the plug?

  3. #3
    Join Date
    31st December 2007 - 11:54
    Bike
    2004 Honda CR125
    Location
    auckland
    Posts
    14
    Quote Originally Posted by cheese View Post
    My bike was not running quite right and felt a bit sluggish the other weekend, so I thought I'll repack the pipe and check the plug and if I can be bothered a recon.

    I found the plug quite black and quite alot of carbon build up. The muffler has a bit of oil over it at teh end of each ride too so I think its running a bit rich.
    i had a rm125 that did this a few times and kept fouling the plug ,only thing i can think off is check your mix ratio,try a hotter burning plug to

  4. #4
    Join Date
    2nd October 2005 - 00:47
    Bike
    CR250
    Location
    Papamoa
    Posts
    3,993
    Quote Originally Posted by jimmy 2006 View Post
    probably a silly query, but have you just tried cleaning the plug?
    LOL yeah, I was trying to get a diagnosis from the plug condition. I'll probably put a new plug in.

  5. #5
    Join Date
    21st May 2007 - 18:03
    Bike
    kx250f
    Location
    shore
    Posts
    1,616
    Quote Originally Posted by cheese View Post
    My bike was not running quite right and felt a bit sluggish the other weekend.
    Maybe you've put weight on

  6. #6
    Join Date
    17th April 2007 - 11:05
    Bike
    CRF250R
    Location
    Taranaki
    Posts
    553
    Well from the looks of that plug id say its just old and used if it was running fine before then maybe you have lost some compression and could be a sign to give the top end a birthday.............And bang a new plug in it at the same time

    Just my 2cents so dont take it as gospel

  7. #7
    Join Date
    22nd September 2006 - 11:26
    Bike
    RMZ 250
    Location
    Auckland
    Posts
    543
    Quote Originally Posted by cheese View Post
    My bike was not running quite right and felt a bit sluggish the other weekend, so I thought I'll repack the pipe and check the plug and if I can be bothered a recon.

    I found the plug quite black and quite alot of carbon build up. The muffler has a bit of oil over it at teh end of each ride too so I think its running a bit rich.
    My plugs look like that after 1-2hours riding...damn its getting expensive, might have to talk to a shop as $7 a plug adds up after a while.

  8. #8
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    Have you leaned of the jetting for summer riding? Your bike runs richer in the heat.


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  9. #9
    Join Date
    17th July 2006 - 13:53
    Bike
    2006 CR250R
    Location
    Gisborne
    Posts
    2,090
    [QUOTE=-df-;1363565]My plugs look like that after 1-2hours riding...damn its getting expensive, might have to talk to a shop as $7 a plug adds up after a while.[/QUOTE

    wow, you're getting a cheap deal on plugs!

  10. #10
    Join Date
    22nd September 2006 - 11:26
    Bike
    RMZ 250
    Location
    Auckland
    Posts
    543
    Quote Originally Posted by B0000M View Post
    Quote Originally Posted by -df- View Post
    My plugs look like that after 1-2hours riding...damn its getting expensive, might have to talk to a shop as $7 a plug adds up after a while.
    wow, you're getting a cheap deal on plugs!
    presuming thats a pisstake? if so, where do you get yours?

  11. #11
    Join Date
    17th July 2006 - 13:53
    Bike
    2006 CR250R
    Location
    Gisborne
    Posts
    2,090
    no, not a pisstake, i went to cyclespot on barrys pt rd - takapuna, they charged me $20

  12. #12
    Join Date
    11th April 2005 - 20:27
    Bike
    KTM 200EXC RM250
    Location
    Waitakere
    Posts
    2,280
    BR8EG is about $20.00
    BR8ES is about $7.00


    Twice the displacement, twice the cost and a decibel problem, I'll pass on the inside brraaaap!!!

  13. #13
    Join Date
    2nd August 2006 - 22:17
    Bike
    hopefully bringing something back to NZ
    Location
    Hartford Connecticut USA
    Posts
    4,109
    Quote Originally Posted by B0000M View Post
    no, not a pisstake, i went to cyclespot on barrys pt rd - takapuna, they charged me $20
    ill price en up tomorrow and let you know what i can do i get around 50% off most stuff including plugs

  14. #14
    Join Date
    12th March 2006 - 15:54
    Bike
    none
    Location
    Auckland
    Posts
    178
    Quote Originally Posted by -df- View Post
    My plugs look like that after 1-2hours riding...damn its getting expensive, might have to talk to a shop as $7 a plug adds up after a while.
    rejet your bike mine was doing the same so i spent some time reading up on the internet and got my bike running way better. my bike used to destroy a new plug in half an hour. gets expensive over time

  15. #15
    Join Date
    19th December 2007 - 17:56
    Bike
    2007 cbr1000rr
    Location
    auckland
    Posts
    60
    just sounds like a case of right hand no turney far enough! open that thing up man or get a 4 stroke!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •