Page 1 of 5 123 ... LastLast
Results 1 to 15 of 73

Thread: Running out of lean

  1. #1
    Join Date
    3rd June 2005 - 15:20
    Bike
    81 katana 650 fighter.
    Location
    West!!!! (Auckzorz)
    Posts
    7,025
    Blog Entries
    2

    Running out of lean

    I have a problem...i can hang off my bike like mad and still i'm scraping fairings...and alternator cover while riding.... both at the track and on the road.....and levering off the alternator cover is not good.... means rear goes on an adventure.

    i am hanging off as much as i can. Trying to minimalise how much i'm leaning the bike over.

    in my signature pic below is a bad example...and the only pic as it was in early laps of the first session....i have scraped my arse on the ground before. so when i am right off....my knee of my outside leg is on the edge of the seat hanging right off...

    i have done the whole try kiss ya mirror thing also.

    what can i do...

    do i need a bigger bike...

    is the 250 just not meant for this?

    i am 6 foot tall.

    around taupo through some of the corners....my knee is down and the inside of my leg is hard against fairing the bike is laying on me. and i am scraping my fairing and alternator cover.... heres a pic after beign on the track....i had just painted the fairing too

    http://www.kiwibiker.co.nz/forums/at...0&d=1193565429

    this is not some wank wank i'm the man post it's a serious question that i need help with. As i want to get faster. Any help would be appreciated.

    i can't ride the bike at the moment as the engine is buggered.

  2. #2
    Join Date
    13th January 2004 - 11:00
    Bike
    Honda PC800
    Location
    Henderson -auckland
    Posts
    14,163
    It doesn't matter . You don't have a licence or a race licence so you wont be riding for ages anyhow.
    To see a life newly created.To watch it grow and prosper. Isn't that the greatest gift a human being can be given?

  3. #3
    Join Date
    22nd August 2003 - 22:33
    Bike
    ...
    Location
    NZ
    Posts
    4,205
    Blog Entries
    5
    Who would have thought that in these days of 2% unemployent, some losers STILL can't get a job

  4. #4
    Join Date
    3rd June 2005 - 15:20
    Bike
    81 katana 650 fighter.
    Location
    West!!!! (Auckzorz)
    Posts
    7,025
    Blog Entries
    2
    Quote Originally Posted by FROSTY View Post
    It doesn't matter . You don't have a licence or a race licence so you wont be riding for ages anyhow.
    I have a race license and will be at trackday 7

    Quote Originally Posted by marty View Post
    Who would have thought that in these days of 2% unemployent, some losers STILL can't get a job

    Relevant how?

  5. #5
    Join Date
    1st November 2005 - 08:18
    Bike
    F-117.
    Location
    Banana Republic of NZ
    Posts
    7,048
    Eat more pies.
    TOP QUOTE: “The problem with socialism is that sooner or later you run out of other people’s money.”

  6. #6
    Join Date
    21st December 2005 - 23:41
    Bike
    HONDA EXPRESS
    Location
    forest brightly feathered
    Posts
    6,457
    poked suspension?
    get it decked out in Penske gear from Shaun

    www.PhotoRecall.co.nz

  7. #7
    Join Date
    15th March 2004 - 13:00
    Bike
    Austrian and Italian
    Location
    Glenfield, Auckland
    Posts
    4,687
    Quote Originally Posted by kiwifruit View Post
    poked suspension?
    get it decked out in Penske gear from Shaun
    What he said.

  8. #8
    Join Date
    3rd June 2005 - 15:20
    Bike
    81 katana 650 fighter.
    Location
    West!!!! (Auckzorz)
    Posts
    7,025
    Blog Entries
    2
    yeah suspension could do with some work....

    but i'm still running outta lean..... is it justy the bikes limits or what because i'm still about 4 seconds off a winning laptime to win streetstock....

    i need 1:57's and i'm getting 2 min flats and 2 min 2 second laps....

    so it's really not gunna cut it i just can't figure out what i'm doing wrong.

  9. #9
    Join Date
    25th January 2007 - 10:06
    Bike
    '14 Multistrada 1200S
    Location
    palmy
    Posts
    3,759


    F M S

  10. #10
    Join Date
    15th March 2004 - 13:00
    Bike
    Austrian and Italian
    Location
    Glenfield, Auckland
    Posts
    4,687
    Quote Originally Posted by skidMark View Post
    yeah suspension could do with some work....

    but i'm still running outta lean.....
    Stop.

    Brain on.

    You're getting into a corner, the suspension is compressing with the weight of the bike, and the centripetal force due to cornering. This effectively lowers the ride height of the bike, making things scrape.

    Fix the suspension so the ride height stays more constant and hey presto, nothing scraping.

  11. #11
    Join Date
    21st December 2005 - 23:41
    Bike
    HONDA EXPRESS
    Location
    forest brightly feathered
    Posts
    6,457
    Quote Originally Posted by Devil View Post
    Stop.

    Brain on.

    You're getting into a corner, the suspension is compressing with the weight of the bike, and the centripetal force due to cornering. This effectively lowers the ride height of the bike, making things scrape.

    Fix the suspension so the ride height stays more constant and hey presto, nothing scraping.
    what he said

    www.PhotoRecall.co.nz

  12. #12
    Join Date
    1st August 2004 - 16:19
    Bike
    nothing :(
    Location
    Auckland
    Posts
    2,128
    Quote Originally Posted by kiwifruit View Post
    what he said
    no no no what you said

    skid stop wasting time
    Second is the fastest loser

    "It is better to have ridden & crashed than never to have ridden at all" by Bruce Bennett

    DB is the new Porridge. Cause most of the mods must be sucking his cock ..... Or his giving them some oral help? How else can you explain it?

  13. #13
    Join Date
    21st April 2006 - 10:10
    Bike
    04 R6
    Location
    Auckland
    Posts
    1,059
    get a job, get some suspension shinies, go faster

    three easy steps to shaving seconds off your lap time

  14. #14
    Join Date
    10th June 2003 - 12:00
    Bike
    Kawasaki ZX750-H1~2 (Pre 89 F1)
    Location
    Auckland
    Posts
    401
    Quote Originally Posted by skidMark View Post
    I have a problem...i can hang off my bike like mad and still i'm scraping fairings...and alternator cover while riding.... both at the track and on the road.....and levering off the alternator cover is not good.... means rear goes on an adventure.

    i am hanging off as much as i can. Trying to minimalise how much i'm leaning the bike over.

    in my signature pic below is a bad example...and the only pic as it was in early laps of the first session....i have scraped my arse on the ground before. so when i am right off....my knee of my outside leg is on the edge of the seat hanging right off...

    i have done the whole try kiss ya mirror thing also.

    what can i do...

    do i need a bigger bike...

    is the 250 just not meant for this?

    i am 6 foot tall.

    around taupo through some of the corners....my knee is down and the inside of my leg is hard against fairing the bike is laying on me. and i am scraping my fairing and alternator cover.... heres a pic after beign on the track....i had just painted the fairing too

    http://www.kiwibiker.co.nz/forums/at...0&d=1193565429

    this is not some wank wank i'm the man post it's a serious question that i need help with. As i want to get faster. Any help would be appreciated.

    i can't ride the bike at the moment as the engine is buggered.
    With all due respect, if indeed, there is any due & after having seen some of your other posts / wastes of space, I wish to say this & only this:

    "YOU APPEAR TO BE THE BLOODY EXPERT ~ YOU FIGURE IT OUT..."

    Cheers

    To finish first - first you must finish... Oh b.t.w, which way doe's Turn 1 go & whats the lap record...

  15. #15
    Join Date
    19th December 2007 - 17:56
    Bike
    2007 cbr1000rr
    Location
    auckland
    Posts
    60
    ever thought that 3 seconds may be from you braking to early and getting on the gas too late? just because your "leaning" doesnt mean shit if your braking to early

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •