TZR, RZ250 parts

[lb99]

Fucked if I know how to ID them actually. If I had some I'd have a clue... The bike came without them. Price? Well a whole running engine is worth about $400-800 depending on condition. Let's haggle.

ok, i'm positive theres a bottom end and a head at least, although unknown condition, and it would make sense for "those barrels" to be from the same model.......

I need carb parts, got any?

[Skunk]

Only the ones I need sorry. Got them off TrudMe.

I started collecting these bits together over two years ago...

[Ixion]

ok, i'm positive theres a bottom end and a head at least, although unknown condition, and it would make sense for "those barrels" to be from the same model.......

I need carb parts, got any?

I got RZ250 carbs spare. Dunno what condition they're in though . Look OK.

[lb99]

I was looking for some carbs to fit my 73 rd350, I dont care what, i just want to hear it fire up before i strip it down and do something nuts with it.

I heard about some 28mm flatslides, so I chased them up (tzr as it turns out) and came across a whole heap of stuff.

the flatslides fit prefectly (and look natty too)

I have 5 bodys, but only one slide and cap assy arrrgggghhhh

I guess i could fire it up 1 cyl at a time

I wish I had some cash

[Skunk]

I could lend mine to you. I have some RD400 carbs. Strictly lend - I need them for my RD400 project.

[bungbung]

I have 5 bodys, but only one slide and cap assy arrrgggghhhh

Where do they go? I bought a TZR complete except for both caps and slides

[lb99]

I could lend mine to you. I have some RD400 carbs. Strictly lend - I need them for my RD400 project.

nahh, i'd rather own em, I have lots of bits now, I'll get it togeather one day

thanks anyway

[lb99]

Where do they go? I bought a TZR complete except for both caps and slides

its got me fucked, I have a throttle cable though

[Marls]

got any 3xv2 parts?
I need a cyclinder and head....

[lb99]

got any 3xv2 parts?
I need a cyclinder and head....

not sure, unlikely on the cyl, but the head is possible, I am goint to go through it today

[lb99]

I went through what I have today

here goes
__________________
Engine

3x 1kt bottom end, one complete, but siezed (dont know why) 2 in bits, judging by the crank cases

3x cranks, not siezed but bearings dont sound too flash
3x head, all look usable, varying states of ok ness
clutch and trans parts galore, some clusters complete, many scattered
cases for above engines, water pumps ect.....
2x oil pumps (and resovoirs if you want em)
1x kickstarter
__________________
Fuel system

5x 28mm mikuni flatslide bodies, no jets, only one slide assy
6x reed block
1x fuel tap
1x powervalve servo
1x spare cam whatsit for powervalve servo
__________________
2x ss sleeves for exhaust
__________________
Frame/ Suspension

1x rear shock, looks ok, not too dirty, shaft not rusty
1x top triple clamp
2x engine sub frame, both look ok, not bent
Various engine mounts
__________________
Electrical

3x wiring looms
several cdi units (1x aftermarket)
regulators and stuff
1x pulser coil
coils
3x lh switch block
4x front indicator, 2 in ok cond, two crap with no lenses
3x rear indicator.
__________________

two sets of mirrors (different types) ok cond.
one mirror with no glass.

just ask for pics

offers on any (or all) parts, all funds to go toward my RD350 project

I am looking for enough parts to build up a couple of carbs to suit, I have plenty of rd350 bodies as well as the above mentioned flatslides (which fit and look cool).........................i have no money

[Skunk]

Excellent. I'm making a list and checking it twice.

[lb99]

I had to move all this shit around in my shed today, I wouldnt mind getting rid of it.

[gammaguy]

I had to move all this shit around in my shed today, I wouldnt mind getting rid of it.

put the lot up for sale,name a price(or a reserve)and you never know.

i am def a starter,if the price is right.

[lb99]

put the lot up for sale,name a price(or a reserve)and you never know.

i am def a starter,if the price is right.

offer away, pick the jewels out if you want, got my rd350 running today so need cashflow to start the project propper