Page 4 of 6 FirstFirst ... 23456 LastLast
Results 46 to 60 of 90

Thread: Cornering - To brake or not to brake

  1. #46
    Join Date
    25th July 2006 - 21:34
    Bike
    flippy
    Location
    North Shore
    Posts
    1,213
    Blog Entries
    1
    Quote Originally Posted by R6_kid View Post
    Deliberatly trail braking into a corner means using up more of your available grip as you enter, and therefore isn't a smart move on the road, and has infact got me into trouble in the past (the rustle in Russell).
    I have once or twice done this to "test" how much grip a road/tyre. has. also like to trail brake in the wet as loosing the rear makes you fall over lots slower than the front





    (also useful round white line, gravel, oil, petrol stations, mates lawns.....)

  2. #47
    Join Date
    3rd March 2004 - 22:43
    Bike
    Guzzi
    Location
    In Paradise
    Posts
    2,490
    Have not read all of this but my take on cornering is simple. Brake before you have angled the bike and power out of the corner. If you have to brake when the bike is on the lean and before you have reached the apex you have come in to hard and if something is to go wrong there is not a lot of room to get out. Less if traffic is coming into you. The secret for hard cornering is not the line of the bike but the line of your eyesight. Keep your eyes focused on the 'vanishing point.' Where you look is where you go.


    Skyryder
    Free Scott Watson.

  3. #48
    If you have to use the ''vanishing point'' method in a corner - you've already fucked up.Everything follows corner entry,fuck up the entry and you're in trouble.Simple as that as far as I'm concerned - if you are having to take corrective action anywhere in the corner,you got it wrong coming in.Go back to the start.....
    In and out of jobs, running free
    Waging war with society

  4. #49
    Join Date
    14th December 2006 - 23:38
    Bike
    BMW R1200GS
    Location
    Christchurch
    Posts
    140
    Back to front. If your entry speed is buggered it's possibly because you weren't using the vanishing point properly.

    VP is everywhere. Use it on the straights and throughout every corner, including entry. I'm sure Skyrider meant this??

  5. #50
    Join Date
    4th August 2006 - 12:37
    Bike
    Sportster
    Location
    Hamilton
    Posts
    1,673
    Blog Entries
    1
    All your replies have been great. I have got a couple of great tips off it.

    Assuming I pick my corner line correctly and gauge my entry speed correctly things are off to an excellent start.

    To help with the actual corner and gain confidence to perhaps corner a little more quickly, my two favourite tips so far are

    1. Look where you want to go! As someone else mentioned on this thread - this works really well on roundabouts too (hammyhole has lots of them). If you look just in front of you your roundabout journey is awkward. Really I should know this - playing any ball sport (for me hockey and football) When you shoot at goal you look where you want the ball to go NOT at the obstacle ie goalie.

    2. Kiss the mirrors - sounded really weird - but has helped me get my body into a better position on the bike. As yet I havent managed to actually kiss the mirrors. But I imagine if I do I will be in a whole world of trouble

  6. #51
    Join Date
    5th August 2005 - 14:30
    Bike
    Various
    Location
    Auckland
    Posts
    4,359
    Quote Originally Posted by wysper View Post
    2. Kiss the mirrors - sounded really weird - but has helped me get my body into a better position on the bike. As yet I havent managed to actually kiss the mirrors. But I imagine if I do I will be in a whole world of trouble
    Ah, now I know why there are always lip marks on my bathroom mirror when R6_Kid has been here.

    So how do you judge the appropriate speed for a corner?
    Do you find that at times you overcook or at other times you slow down more than required and get through the corner thinking, damn I could have done that safely twice as fast?
    Quote Originally Posted by Tank
    You say "no one wants to fuck with some large bloke on a really angry sounding bike" but the truth of the matter is that you are a balding middle-aged ice-cream seller from Edgecume who wears a hello kitty t-shirt (in your profile pic) and your angry sounding bike is a fucken hyoshit - not some big assed harley with a human skull on the front.

  7. #52
    Join Date
    8th November 2004 - 11:00
    Bike
    GSXR 750 the wanton hussy
    Location
    Not in Napier now
    Posts
    12,765
    Quote Originally Posted by The Stranger View Post
    Ah, now I know why there are always lip marks on my bathroom mirror when R6_Kid has been here.

    So how do you judge the appropriate speed for a corner?
    Do you find that at times you overcook or at other times you slow down more than required and get through the corner thinking, damn I could have done that safely twice as fast?
    By being (at least peripherally) aware of the vanishing point(s) ahead. If it's at a constant distance from you, your speed is right. If it is getting further away, you may safely speed up. But if it is getting closer, you are too fast. How rapidly it approaches will determine how badly you fucked up.
    Do you realise how many holes there could be if people would just take the time to take the dirt out of them?

  8. #53
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    If my face is near a mirror I am too far forward on my bike. My shoulders are over the bars, not behind them, and its hard to put much force on the bars because I'm leaning heavily on them and I have no leverage. Also my front is more jittery with this much weight on it. My bike is far more settled if I sit right back, and its much easier to push directly on the bars. I'm just learning this myself though.

    I tried sliding my butt off the seat slightly, and boy does she wanna corner now! Whew! Butt+shoulders out = LOTS of opposite bar push before the corner. Curious.

    I clipped my boot on the ground doing this the other day - first time ever! Gave me quite a fright!

    Steve
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  9. #54
    Join Date
    3rd March 2004 - 22:43
    Bike
    Guzzi
    Location
    In Paradise
    Posts
    2,490
    Quote Originally Posted by bikemike View Post
    Back to front. If your entry speed is buggered it's possibly because you weren't using the vanishing point properly.

    VP is everywhere. Use it on the straights and throughout every corner, including entry. I'm sure Skyrider meant this??

    Absolutely. It's when you lose the VP custard appears everywhere.

    Skyryder
    Free Scott Watson.

  10. #55
    Join Date
    3rd March 2004 - 22:43
    Bike
    Guzzi
    Location
    In Paradise
    Posts
    2,490
    Quote Originally Posted by MSTRS View Post
    By being (at least peripherally) aware of the vanishing point(s) ahead. If it's at a constant distance from you, your speed is right. If it is getting further away, you may safely speed up. But if it is getting closer, you are too fast. How rapidly it approaches will determine how badly you fucked up.


    That's spot on. Best post of the thread.

    Skyryder
    Free Scott Watson.

  11. #56
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    Quote Originally Posted by Motu View Post
    if you are having to take corrective action anywhere in the corner,you got it wrong coming in.Go back to the start.....
    hrm, I struggle with this. My young fella (15 y/o learner) was complaining "once I have initially set the corner up its incredibly hard to change it." I told him "Concentrate and steer with the bars, dude. Pick your position on the road and stick to it like poo to a furry blanket. Don't leave your chosen line - unless you are forced to make a new plan. Develop your discipline."

    I took it that he was repeating a mistake that I made earlier, "estimate what my turning radius I will need and set it up in one go - no resteering." This left me holding my breath with my arms locked mid-corner, and accepting the outcome no matter what. I had to relax and breathe and just steer - the smoother the better.

    Steve
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  12. #57
    Join Date
    15th February 2005 - 15:34
    Bike
    Katanasaurus Rex
    Location
    The Gates of Delirium
    Posts
    9,020
    Quote Originally Posted by DangerousBastard View Post
    My young fella (15 y/o learner) was complaining "once I have initially set the corner up its incredibly hard to change it." I told him "Concentrate and steer with the bars, dude. Pick your position on the road and stick to it like poo to a furry blanket. Don't leave your chosen line - unless you are forced to make a new plan. Develop your discipline."
    Why not suggest he goes in slower so he has the ability to change his line easier?

  13. #58
    Join Date
    5th August 2005 - 14:30
    Bike
    Various
    Location
    Auckland
    Posts
    4,359
    Quote Originally Posted by Skyryder View Post
    That's spot on. Best post of the thread.

    Skyryder
    Hey, what about the cunt who had the forethought to ask the question in the first place?
    Quote Originally Posted by Tank
    You say "no one wants to fuck with some large bloke on a really angry sounding bike" but the truth of the matter is that you are a balding middle-aged ice-cream seller from Edgecume who wears a hello kitty t-shirt (in your profile pic) and your angry sounding bike is a fucken hyoshit - not some big assed harley with a human skull on the front.

  14. #59
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    Quote Originally Posted by Katman View Post
    Why not suggest he goes in slower so he has the ability to change his line easier?
    Well I can take the corner at 120k, and he's taking it at 85k. I guess I could ask him to slow down, but he already knows how to nana a corner - why not teach him the correct procedure, rather than just prevent him from learning? He is well in control of his emotional state, and well inside his ability. So thats why.


    Steve
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  15. #60
    Join Date
    5th August 2005 - 14:30
    Bike
    Various
    Location
    Auckland
    Posts
    4,359
    Quote Originally Posted by DangerousBastard View Post
    Well I can take the corner at 120k, and he's taking it at 85k. I guess I could ask him to slow down, but he already knows how to nana a corner - why not teach him the correct procedure, rather than just prevent him from learning? He is well in control of his emotional state, and well inside his ability. So thats why.


    Steve
    Only really leaves the teacher then.
    Quote Originally Posted by Tank
    You say "no one wants to fuck with some large bloke on a really angry sounding bike" but the truth of the matter is that you are a balding middle-aged ice-cream seller from Edgecume who wears a hello kitty t-shirt (in your profile pic) and your angry sounding bike is a fucken hyoshit - not some big assed harley with a human skull on the front.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •