Armature speller
A JT Sprockets JTF437 (DR Big) is available in 14-15-16 but is narrower on the spline.
Could be spaced to the XR's 13mm.
I'm running one of the 16's on the DR650.
EDIT: Aaaannnnddd I was wrong. The XR one may fit the DR but the DR one won't fit the XR...
Nana on a Hotrod
how fast is that on BRP?Originally Posted by Buddha#81
dunno bout the 16, didnt think one would fit
'Good things come to those who wait'
Bollocks, get of your arse and go get it
Nana on a Hotrod
anyone got any decomp parts they wanna flick
'Good things come to those who wait'
Bollocks, get of your arse and go get it
MotoFXR's will rule the world!
I got a vapor digital dash and im guessing it fairly accurate and I had 167 indicating so (and it will fit without the casesaver) i'm in hope of not really gaining top speed but to drop my rpm down and not have to roll off the throttle 2/3 down the straight. it will defently pull the higher gearing, be happy with 170 on a stock BRP. It will be nice to not see the red flashing LED "over rev" nutting off at me.
I looked on the JT sprocket site today and found a 650 dominator one 16 tooth but for a 525 chain so im going to see if they are avaliable and machine it to 520 width.
Yesterday I ordered a 13 front which will allow me to pull wheelies at will at Greymouth and make the offroad section a bit more bareable.
Its harder to lose weight than gain horsepower.
Nana on a Hotrod
im liking the sound of that
'Good things come to those who wait'
Bollocks, get of your arse and go get it
Nana on a Hotrod
http://www.trademe.co.nz/Trade-Me-Mo...-324569035.htm
i was thinkin, 22ltr acerbis, tag bars with 1 1/2" risers andys racks and universal mini screen and youve got the altimate adventure bike for just over 10k, only 2 years old, 6k and good for another 20 years. she should handle heated grips and a gps too.
what ya reckon
'Good things come to those who wait'
Bollocks, get of your arse and go get it
MotoFXR's will rule the world!
For those that are interested in running a 16tooth front, they do fit.......just, no way of running the case saver!!!! But the XL600V has the same spline and offset mounting bolt system but it is a 525 (pt no. JTF296-16) so i'm skimming 1.5 mm off the sprocket to make it a 520, i'll post photos and report on how it goes at the end of next month we it goes back to Ruapuna full track.
The JT sprocket website is great for there drawings and worth a look if you are trying to find a curlie.
As a side note Budjet Motorcycle spares found me a 13 tooth front which JT, Honda and most others dont list.....so ive managed to now obtain 13 to 16 for anything that pops up!
Its harder to lose weight than gain horsepower.
Nana on a Hotrod
awesome mate thats a bloody good range of gearing, wish i could get a 16 on the 6 that would really open up her legs
'Good things come to those who wait'
Bollocks, get of your arse and go get it
MotoFXR's will rule the world!
Well JT list one http://www.jtsprockets.com/52.0.html...el_uid=4880&p=
Its harder to lose weight than gain horsepower.
Nana on a Hotrod
wrong model bro diferent spline, already removed case saver for the 15, a 16 (if possible)would prolly be rubbing the stator wiring
http://www.jtsprockets.com/52.0.html...sel_uid=770&p=
'Good things come to those who wait'
Bollocks, get of your arse and go get it
MotoFXR's will rule the world!
Same spline as the BRP and XL600Tansalp.....which is what I'm modding to suit go on give it a go! http://www.jtsprockets.com/52.0.html...el_uid=4878&p=
Its harder to lose weight than gain horsepower.
Nana on a Hotrod
after you get yours on bro i'l get you to give me a o/d measurement with the chain on..
just had a closer look at mine and with the 15 on i only got about 8-10mm till i rubbing the casing.
'Good things come to those who wait'
Bollocks, get of your arse and go get it
Nana on a Hotrod
yeah naaa never mind, i just put the 15 back on and theres bout 5mm to play with, might just get another 42 rear and swap back to the 48 for trails etc.
anyone useing the Notoil air filter stuff.... how do you clean the shit out, gas dont move it, would i have to get some of the notoil cleaner as well? what are you fellas using?
i think i read some pages back about using gear oil
'Good things come to those who wait'
Bollocks, get of your arse and go get it
Forum whore
According to the JT website the Honda spline is the same as the KLR650 - there are 16 (and 17!) T front sprockets available from various sources (but not JT) for KLRs
it's not a bad thing till you throw a KLR into the mix.
those cheap ass bitches can do anything with ductape.
(PostalDave on ADVrider)
Nana on a Hotrod
me and the Pig havin a few
'Good things come to those who wait'
Bollocks, get of your arse and go get it
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks