YR64L goes dirt!

[Cr1MiNaL]

lol that littel 125 will have as much poke as most 250 fourstrokes, and delivers it all in the most difficult way possible - all at once



watch what you hit with degreaser - some seals don't like it, and if it gets into bearings they don't last long

and it removes graphics...

IF i elect to get my bike sparkly i use good ol' warm soapy water with a few rags and a toothbrush... does take half a day though


and it pays to grease bolts so stop them rusting in place

Thats true I can't possibly open any gear out on the RM and a mate whose been riding for a while can't open second out in places too. Its just so peaky and he reckons its as fast if not faster than his 08 4 stroke kawaka 250.

EJK they compete in the same race class as 250 four strokes too.

Andrew- I hit whatever dirt I could see with de-greaser. What sorts of seals don't like it. Maybe next time you could point them out to me so I can take more care?

[motorbyclist]

yep the 125 2stroke should be as fast as the 250 four - just the 250 four has power and torque everywhere plus a handy engine brake plus they're a fair bit less temperamental....

aren't all mx bikes standard with race parts like mufflers? watch out it doesn't muck up the tuning of the expansion chamber or fuel/air mix or you'll be losing power and possibly seize or melt a hole in the piston if it runs too lean

What sorts of seals don't like it. Maybe next time you could point them out to me so I can take more care?

i can only assume forks, brakes and chain plus any less than perfectly sealed bearings/bushes - BUT wouldn't know for sure, so stay clear myself

it does work though