Page 5 of 13 FirstFirst ... 34567 ... LastLast
Results 61 to 75 of 186

Thread: How fast can you stop. Have you tried?

  1. #61
    Join Date
    4th February 2007 - 19:23
    Bike
    None - s'fucked
    Location
    West Auckland
    Posts
    2,182
    Quote Originally Posted by Jantar View Post
    The riders who make rediculous claims are the ones who don't bother even seeing if what they claim is possible with today's technology.
    Well, I'll have you know that my RF stops with enough force to change the rotation of the Earth, and make rips in the Space Time Continuum.
    Quote Originally Posted by rachprice View Post
    Jrandom, You are such a woman hating cunt, if you weren't such a misogynist bastard you might have a better luck with women!

  2. #62
    Join Date
    26th September 2007 - 13:52
    Bike
    Scorpio
    Location
    Tapu te Ranga
    Posts
    1,471
    Quote Originally Posted by Jantar View Post
    I would agree with Badjelly. I am probably the one person on KB who uses maths more than anyone. But then I go and put it into practice. Theory (and math) is great to work out what is possible. Putting it into practice is where it really counts.
    Yes. Your emergency-braking-on-a-bend experiments are particularly commendable!

  3. #63
    Join Date
    9th December 2005 - 20:11
    Bike
    Several old ones
    Location
    Waikato
    Posts
    750

    Thats it I am going to lonely peice of road an do it

    I will go with a buddy to lonely piece of road with a tape and mark white line across with a bit of pumice or something then at varying speeds mark where I finish up and see if I can better the distance. Why not

    I see worn tyres coming up, but it hopefully will prove something, and give some appreciation of following distances.
    I will let you know the distances.

  4. #64
    Join Date
    4th October 2008 - 16:35
    Bike
    R1250GS
    Location
    Wellington
    Posts
    10,240
    Quote Originally Posted by rocketman1 View Post
    I will go with a buddy to lonely piece of road with a tape and mark white line across with a bit of pumice or something then at varying speeds mark where I finish up and see if I can better the distance. Why not

    I see worn tyres coming up, but it hopefully will prove something, and give some appreciation of following distances.
    I will let you know the distances.
    you dont have to make 50 tyre shredding stops....all you have to do is make a few stops gradually increasing the force that you use on the (mostly) front brake...dont put it on hard at first increase the pressure as ou slow down.I am betting that you will decrease your stopping distance by lots....its really good practise!

  5. #65
    Join Date
    15th June 2008 - 18:13
    Bike
    rego on hold nick smith special
    Location
    NZ
    Posts
    1,933
    Blog Entries
    1
    [QUOTE=rocketman1;1904154]I will go with a buddy to lonely piece of road with a tape and mark white line across with a bit of pumice or something then at varying speeds mark where I finish up and see if I can better the distance. Why not

    I see worn tyres coming up, but it hopefully will prove something, and give some appreciation of following distances.
    I will let you know the distances.[/QUOTE

    I'll give you some bench marks.

    I was reading an article by some government safety people in some country that made some findings upon motorcycle emergency braking and braking performance.

    They took a Honda GL1500 and a Honda CBR929 and made hundreds of braking attempts.

    Basicallly, they did stops from 100kph. Amazingly the CBR929 and the GL were very similar and there was no real difference between the 2 in stopping distance.

    They got 38m as an average for the good runs.

    I then looked up some braking stats from 100kph and i found that cars like Honda Integra type R do 38m from 100. There was a porsche 911 GT3 cup car that could do 32m!! Cars with really big sporty tyres like the 911 turbo and GT2 did 35m. I'm not sure if bikes could touch those distances. Family cars with tyres under 200 in size did 40- 42m generally.

    Try see what you can get against 38m and report back?
    ...Full throttle till you see god, then brake.

  6. #66
    Join Date
    5th May 2008 - 20:56
    Bike
    Z900
    Location
    Dunedin
    Posts
    666
    i had a head on with a car once, at a low speed of corse.... and i stoped real quick. wouldnt want to repeat it again
    "your car is boring"

  7. #67
    Join Date
    21st August 2004 - 12:00
    Bike
    2017 Suzuki Dl1000
    Location
    Picton
    Posts
    5,177
    Quote Originally Posted by trademe900 View Post
    .....They got 38m as an average for the good runs.

    I then looked up some braking stats from 100kph and i found that cars like Honda Integra type R do 38m from 100. There was a porsche 911 GT3 cup car that could do 32m!! Cars with really big sporty tyres like the 911 turbo and GT2 did 35m. I'm not sure if bikes could touch those distances. Family cars with tyres under 200 in size did 40- 42m generally.
    This equates with the best data I have seen. Proffessional riders on a perfect surface and 38 m is 1.03 G.

    Most riders on a typical road surface 0.9 G would be a satisfactory target to aim for. That's 44 m as a good stopping target.
    Time to ride

  8. #68
    Join Date
    16th February 2007 - 08:25
    Bike
    vf1000,mz500,xz400,kh125,bridgestone60
    Location
    new plymouth
    Posts
    533
    stopping??? not very fast, drums front and rear arnt really there to stop you, just to pass the wof, i'd stop faster if i put my feet down

  9. #69
    Join Date
    26th February 2005 - 15:10
    Bike
    Ubrfarter V Klunkn,ffwabbit,Petal,phoebe
    Location
    In the cave of Adullam
    Posts
    13,624
    Y' reckon? Fastest stopping I ever heard of was the Vincent. 20 foot from 30 mph. Double side front admittedly.

    In fact drum brakes from lowish speeds stop faster (tyres being equal) than disks. Greater friction area, and there's not time enough for the heat bukild up to stuff them
    Quote Originally Posted by skidmark
    This world has lost it's drive, everybody just wants to fit in the be the norm as it were.
    Quote Originally Posted by Phil Vincent
    The manufacturers go to a lot of trouble to find out what the average rider prefers, because the maker who guesses closest to the average preference gets the largest sales. But the average rider is mainly interested in silly (as opposed to useful) “goodies” to try to kid the public that he is riding a racer

  10. #70
    Join Date
    15th June 2008 - 18:13
    Bike
    rego on hold nick smith special
    Location
    NZ
    Posts
    1,933
    Blog Entries
    1
    Quote Originally Posted by Ixion View Post
    Y' reckon? Fastest stopping I ever heard of was the Vincent. 20 foot from 30 mph. Double side front admittedly.

    In fact drum brakes from lowish speeds stop faster (tyres being equal) than disks. Greater friction area, and there's not time enough for the heat bukild up to stuff them
    But it's not about brakes, it's about tyres and weight isn't it? Any properly maintained brakes can provide enough to skid the front wheel, so isn't it about how much of that force the tyre can take?
    ...Full throttle till you see god, then brake.

  11. #71
    Join Date
    21st August 2004 - 12:00
    Bike
    2017 Suzuki Dl1000
    Location
    Picton
    Posts
    5,177
    Quote Originally Posted by trademe900 View Post
    ...Any brake can provide enough force to lock the front wheel, so isn't it about how much of that force the tyre can take?
    Oh boy! Have you got a lot to learn. If any brake can lock up the front wheel, then why do manufacturers go to the expense of multi caliper, floating disks, etc? An old single leading edge drum would do just fine.
    Time to ride

  12. #72
    Join Date
    15th June 2008 - 18:13
    Bike
    rego on hold nick smith special
    Location
    NZ
    Posts
    1,933
    Blog Entries
    1
    Quote Originally Posted by Jantar View Post
    Oh boy! Have you got a lot to learn. If any brake can lock up the front wheel, then why do manufacturers go to the expense of multi caliper, floating disks, etc? An old single leading edge drum would do just fine.
    To improve feel and control... doesnt determine outright stopping distance.
    ...Full throttle till you see god, then brake.

  13. #73
    Join Date
    17th May 2003 - 07:12
    Bike
    Il4 and Vtwin
    Location
    Rotorua
    Posts
    1,389
    Quote Originally Posted by Jantar View Post
    Oh boy! Have you got a lot to learn. If any brake can lock up the front wheel, then why do manufacturers go to the expense of multi caliper, floating disks, etc? An old single leading edge drum would do just fine.
    You forgot about USD forks. Thats what gives SM his advantage.

  14. #74
    Join Date
    2nd March 2007 - 10:38
    Bike
    that one in my sig
    Location
    Auckland
    Posts
    2,173
    Quote Originally Posted by trademe900 View Post
    To improve feel and control... doesnt determine outright stopping distance.
    I think you'll find "feel and control" makes a huge difference.

    If you can't feel the front about to wash out you're going to crash or brake less hard.

  15. #75
    Join Date
    28th December 2008 - 21:12
    Bike
    nightrod
    Location
    Chch
    Posts
    662
    im being taught emergency braking by a mate he makes me speed as fast as i could (which aint that fast considering ive got a gn250 lol).and then visualize a little girl or boy ran infront of the road im getting there i gotta practise practise.my mate once raced in the isle of man and he made me do another excercise where i have to get my tyre nearly touching his like an mm away from his out in waipu.hes crazy whenever i dont do it right or i bump into him we have to do it again. im only on ma dam learners !!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •