Page 1 of 3 123 LastLast
Results 1 to 15 of 36

Thread: Ktm 300

  1. #1
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339

    Ktm 300

    im looking at buying my first ktm, i was looking at a couple of 300's on trade me, has any one had one?, had any problems with one? are there any things i should pay special attention to when looking at one??

  2. #2
    Join Date
    1st December 2008 - 16:59
    Bike
    300EXC
    Location
    Waitakere
    Posts
    1,126
    Try to go for the 08 and above. They have been majorly upgraded from the 07-08. Doubt you will find a second hand 08/09 on trademe. Your only chance is to buy new.. My dad's has been keeping an eye out for the past few months. Nothing.

    Talked to a couple of trust worth mechanics, they seem to think that the KTM parts are no more expensive than that of the japs. It's only the older models which have huge prices on piston kits etc. KTM also say you only have to change the piston and rings every 120hours. Pretty good _b

    I also heard that you have to redo the fork seals every 30 hours.

  3. #3
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    120 hours!! thats pretty sweet, unfortunatly i have to buy second hand, and my budget only allows 5-6 grand, i cant justify having 14 grands worth of bike sitting in the garage collecting dust. ha ha ha. would be nice though.

  4. #4
    Join Date
    3rd November 2006 - 21:14
    Bike
    08 KTM 300 EXC-E -GONE
    Location
    Brisbane
    Posts
    728
    i'm on my second one and absolutely love them, they are so versatile and can be ridden hard on the pipe or lugged around a gear or two higher. I have had no probs with the fork seals just make sure you clean around the dust seals every now and then. you certainly get a good run out of the pistons, most people can get 100 hrs quite comfortably depending on riding style and conditions, I just changed mine after 85hrs and it was still pretty mint, cost me $250 for the piston kit and most parts seem to be well priced but there are a few that seem expensive. My last one was an 03 but there were alot of changes in 04 so if you can get the latter model it would be good.

  5. #5
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    ive stretched my budget ot to $7500 hopefuly i can find a late model one for that, i realy want a 300 but a 250 2-stroke will be good too. gotta be a 2-stroke!!!!

  6. #6
    Join Date
    3rd February 2008 - 21:34
    Bike
    2010 GasGas EC300
    Location
    chch
    Posts
    94
    If you dont mind kick start only, consider the gasgas 300 or 250 also.

  7. #7
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    Quote Originally Posted by Dent View Post
    If you dont mind kick start only, consider the gasgas 300 or 250 also.
    i was thinking about a gas-gas 300, i cant seem to find anyone who has had one. or who the dealer is in hamilton, dont realy want to have to go through an auckland bike shop for parts etc....

  8. #8
    Join Date
    7th January 2008 - 10:18
    Bike
    '08 RM250
    Location
    taupiri
    Posts
    82
    nv motorcycles in morrinsville is the closest i believe...

  9. #9
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    just bought a 2005 KTM 300. looks mint, well looked after. within budget too!! cant wait to hit the trails and the mx track. thanks for the advice. BWAAAAAPP!!!!!

  10. #10
    Join Date
    24th May 2008 - 21:24
    Bike
    some honda bits in a kx chassis
    Location
    Waiuku City
    Posts
    1,326
    Photos or it didnt happen
    we may just go where no ones been

  11. #11
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    Quote Originally Posted by noobi View Post
    Photos or it didnt happen
    havnt picked it up yet, put some pics up soon....

  12. #12
    Join Date
    24th May 2008 - 21:24
    Bike
    some honda bits in a kx chassis
    Location
    Waiuku City
    Posts
    1,326
    Was it or trademe?
    we may just go where no ones been

  13. #13
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    Quote Originally Posted by noobi View Post
    Was it or trademe?
    it was trade me, havnt parted with the money yet, have to wait till the banks are open these are the pics from trade me.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	81183765_full.jpg 
Views:	58 
Size:	68.0 KB 
ID:	114873   Click image for larger version. 

Name:	81183741_full.jpg 
Views:	39 
Size:	66.8 KB 
ID:	114874  

  14. #14
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    i knew i recognised that phrase below your posts NOOBI is it hooker with a penis by TOOL??

  15. #15
    Join Date
    24th May 2008 - 21:24
    Bike
    some honda bits in a kx chassis
    Location
    Waiuku City
    Posts
    1,326
    Quote Originally Posted by flyingcr250 View Post
    i knew i recognised that phrase below your posts NOOBI is it hooker with a penis by TOOL??
    Yea hooker with a penis, Aenima is the fav album atm

    I saw that bike and thought shit thats a steal if its in good condition, someones gonna get a bargain

    Hope its as good as it looks
    we may just go where no ones been

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •