Who can service a Ducati? (Wgtn)

[crazefox]

I have just scored a 916 duc 96 model with 40kms on it thinking of doing the big service myself any ideas?

[Nasty]

Speak to wannabiker ... I know he did lots on his.

[scracha]

I have just scored a 916 duc 96 model with 40kms on it thinking of doing the big service myself any ideas?

Get used to being poor.

[98tls]

Lot to be said for getting on a bike specific forum mate,generally great advice/help not to mention endless bling at good prices (well when the $ good).Nice bike,enjoy.

[Maki]

What's a duckthai?

[hospitalfood]

i say do it yourself. i don't know much about them...?
think the valves will be shimmed so you may need a shim kit.
torque wrench of course.
workshop manual.
you may find that there are step by step instructions on the web so you may not need the manual ?

they are high maintenance so you really have to do it yourself.

i find with my bmw there are lots of older guys who are very helpful.
should all be fine.

[crazefox]

Speak to wannabiker ... I know he did lots on his.

primo will do

[Elysium]

I have just scored a 916 duc 96 model with 40kms on it thinking of doing the big service myself any ideas?

Good luck doing it yourself, and I mean that. I recently spoke to people at various bike shops some mntioned the main disadvantage of a Ducati is the bloody cost to maintain them, you have to take it to official Ducati dealers to get work done on them, something about parts, nuts, bolts etc.. being non-standard.

Is it true that at around 20,000K their engines need an over-haul?

[ntst8]

Is it true that at around 20,000K their engines need an over-haul?

Every 20,000km they need the cam belts replaced, which is doable for the mechanically competent on the air cooled models at least - i've never looked under the skirts of a water cooled one.
Don't do the belts and the engine may need an overhaul.

[AllanB]

Don't do the belts and the engine may need an overhaul.

Same shit as the cambelt in your car - they just have 80-100,000 km replacement intervals.

I have often wondered if Ducati make the cambelts 50% wider how much longer would they last?

Actually I don't see why its a big deal changing them - the basics are the same as a car and they are a lot easier to get to!

Good score - post pictures. How long before the repaint?

[far queue]

I have just scored a 916 duc 96 model with 40kms on it thinking of doing the big service myself any ideas?

Good on ya, I'd love a 916. As 98TLS said, get on a Ducati forum you'll get lots of help. There's no reason you can't do the work yourself.

Good luck doing it yourself, and I mean that. I recently spoke to people at various bike shops some mntioned the main disadvantage of a Ducati is the bloody cost to maintain them, you have to take it to official Ducati dealers to get work done on them, something about parts, nuts, bolts etc.. being non-standard.

Is it true that at around 20,000K their engines need an over-haul?

That's all bullshit, don't believe everything you hear.

[98tls]

Good on ya, I'd love a 916. As 98TLS said, get on a Ducati forum you'll get lots of help. There's no reason you can't do the work yourself.

That's all bullshit, don't believe everything you hear.

Xactly,the great thing about said forums is that every bugger on there is into the same thing and the knowledge is vast,on the TL forum theres step by step pics for even the most basic shit and a great bunch of guys to boot.My old man back in the Bevel drive days was a little involved in the Italian owners thing and whilst there was plenty of cocks there there was also a wealth of knowledge and advice.

[Winston001]

Here ya go http://www.ducati.ms/forums/forumdisplay.php?f=56 Lots of help there and I've seen step by step instructions on doing the valve belts and shims.

Lovely bike the 916. If you don't know it's history it would pay to get a Ducati dealer to do a full service and check it over. It will cost you a $1000 but you can look after it yourself pretty well from then on.

Don't take any notice of the "Ducati are expensive to service" nonsense. It was true of the older ones but the newer bikes are fine, plus there are more of them around so mechanics are familiar with them.

Enjoy!!

[LBD]

I have just scored a 916 duc 96 model with 40kms on it thinking of doing the big service myself any ideas?

Got a good run from my 916 monster, slightly lower tune, but similar. left the valve sets to the experts, the rest my self, nothing a some what capable spanner man cannot do himself.

[johan]

I would suggest you get the DesmoTimes service manual, and maybe the Haynes as well. Or borrow mine!

As said before, let the shop do the valve check, but strip the bike your self to save $$.
When doing the valve check, the cams should be taken off to inspect the rocker arms. At 40kms (thousand?) I would be a little concerned.