Anybody with a decent knowledge on carbs?

[The Pastor]

oh ok, no worries mate, just trying to find someone who can let me use their tools.

its my bike, and im the only one who gets to work on it

[ducatilover]

oh ok, no worries mate, just trying to find someone who can let me use their tools.

its my bike, and im the only one who gets to work on it

We don't have much equipment for welding here at home sorry bro. May I ask why you are doing the subframe mod?

I will have to let you know closer to saturday if I can come up, Mum has her pre-op this week and I may be taking her for the op on saturday. Hopefully I get to blat up to hastings. Poor spada needs a good run, it's been half a day since it got one..... I am hoping the fairing mount will fit, The cbr have triple clamps that taper fowards and mine don't to the same degree

[The Pastor]

why? because i can!

[ducatilover]

why? because i can!

Sound like everything I have done to my bike. We would make a good team "2 stroke v7 125? why guys?"
Coz we fuckin want to!"

You must let me ride the mc22....

[The Pastor]

Sound like everything I have done to my bike. We would make a good team "2 stroke v7 125? why guys?"
Coz we fuckin want to!"

You must let me ride the mc22....

only after 25 beers!

[ducatilover]

only after 25 beers!

Dammit! How about you out run the spada and I sit there making a cup of coffee while I try push past 175 [fucking high profile tyre]

[Brian d marge]

put the tools down and stand clear off the bike

the bike needs cool still air in order to breathe that's why the air box is there, there is some good gains in power with a properly designed airbox


Jets , you can drill emm , but they are designed for fuel flow

its a spada, sell it and buy a 600 , put the factory plastic in a bag and keeep it safe , replace it with a race fairing ,,, donnt kill yourself have fun


Stephen

[ducatilover]

put the tools down and stand clear off the bike

the bike needs cool still air in order to breathe that's why the air box is there, there is some good gains in power with a properly designed airbox


Jets , you can drill emm , but they are designed for fuel flow

its a spada, sell it and buy a 600 , put the factory plastic in a bag and keeep it safe , replace it with a race fairing ,,, donnt kill yourself have fun


Stephen

I understand what you mean stephen, but I am doing these silly things out of curiosity. To create something that interests me and to provide a challenge. Also, I am going to agree on the air box statement.
Have you got any suggestions as to spacing the jets?

[imdying]

Give something like this a crack, then jet to suit.

[ducatilover]

Cheers mate!

[Brian d marge]

I understand what you mean stephen, but I am doing these silly things out of curiosity. To create something that interests me and to provide a challenge. Also, I am going to agree on the air box statement.
Have you got any suggestions as to spacing the jets?

Rotten phone
I had a message typed out and it dissapeared
I use openfoam to look at air flow through airboxes ( just been looking at the airflow through my bathroom)
When you say spacing the jets do you mean putting a spacer under the needle or choosing the correct jet size for the gear and throttle position

Stephen



When you say spacing the jets, do you mean choosing the jets for the gear and throttle position or adding a spacer under the needle to lift it
I use open foam and netgen to look at airflows through airboxes, though my experience is limited

Stephen

[Brian d marge]

Give something like this a crack, then jet to suit.

Friend of mine has just done this on his enfield single and. Reports a strong improvement on the midrange he had to jet up a bit
Downside being the tuned length of the snorkle is eeer long when I get home I'll post a photo

Stephen

[ducatilover]

When you say spacing the jets, do you mean choosing the jets for the gear and throttle position or adding a spacer under the needle to lift it
I use open foam and netgen to look at airflows through airboxes, though my experience is limited

Stephen

Adding a spacer to lift it.