Chappy's round 4 - day to forget

**quickbuck** · 8th September 2009, 19:01

Originally Posted by neil_cb125t

Many thanks to everyone who tried their darndest to get my machine up and going again, ...

Oh,
You're welcome......

Hey, to make life easy I found another sprocket carrier... and cush drive.

**mossy1200** · 8th September 2009, 19:27

Originally Posted by quickbuck

Oh,
You're welcome......

Hey, to make life easy I found another sprocket carrier... and cush drive.

I found me some Carrillo conrods but now i need to find me a second job.

**roadracingoldfart** · 8th September 2009, 22:37

Originally Posted by quickbuck

Oh,
You're welcome......

Hey, to make life easy I found another sprocket carrier... and cush drive.

Ohh isnt he just , im sure lol.

Originally Posted by mossy1200

I found me some Carrillo conrods but now i need to find me a second job.

You mean you do this well with only one job ???? that must be a good payer

**mossy1200** · 8th September 2009, 23:11

Originally Posted by roadracingoldfart

Ohh isnt he just , im sure lol.

You mean you do this well with only one job ???? that must be a good payer

I make my wife work hard.If she would just get two jobs I could retire.

**MOTOXXX** · 9th September 2009, 07:58

Originally Posted by mossy1200

I make my wife work hard.If she would just get two jobs I could retire.

Top man!

**roadracingoldfart** · 10th September 2009, 07:23

Originally Posted by mossy1200

I make my wife work hard.If she would just get two jobs I could retire.

Its a tuff job findin the perfect woman mate !!

Work on her a bit longer and she will come around. 2 jobs is easy , 3 is whats needed for a good race budget though.

**neil_cb125t** · 10th September 2009, 16:57

ha just get your lightened and shot peened - easy peasy and cheap as chips!!
paid $40 a rod for that service.

**Duke girl** · 10th September 2009, 17:08

[QUOTE=zxr400#150;1129392961]

Originally Posted by

Many thanks to everyone who tried their darndest to get my machine up and going again, and special thanks to AJ for giving me his machine, without it my hopes in F3 would have been over.:hug:
QUOTE

Not a problem Brother, just glad you bought my bike back in one peace. Have to admit, i didnt watch much of the race tho, to nerve racking! lol
Hopfully it has given u enough points to take F3!!!!! as long as u dont have any more ooppssess

Neil You have 1 Awesome brother in AJ for what he did for you at the last round. Its so great to see and an real inspiration. Im sure you already know this and if the boot was on the other foot you would have done the same for him.

**mossy1200** · 10th September 2009, 17:15

Originally Posted by neil_cb125t

ha just get your lightened and shot peened - easy peasy and cheap as chips!!
paid $40 a rod for that service.

I got Carrillo conrods,race crank,cams and flatslides coming and considering total loss.Should be good for 170hp when we are finished.Seriously too expensive.Will open and inspect then decide.Was hard enough to convince Suzanne the wiseco kit and 39mm fcr were necessary items as it is.
Carrillo rod kit is 1100usd so not this time.LOL
We may send crank away to APE for knife edge if everything else is to spec inside and the costs dont climb to much.New connecting rod bolts and adjustable cam sprockets are on the way so should be agood start.The info I have says conrods are strong but bolts are the weak link.May shot peen them anyway.

Is there anywhere in NZ that lightens cranks that are highly recommended.
APE charge $300 usd approx plus freight for knife edge ,lighten and balance.

**quickbuck** · 10th September 2009, 23:44

[QUOTE=Duke girl;1129398801]

Originally Posted by zxr400#150

Neil You have 1 Awesome brother in AJ for what he did for you at the last round. Its so great to see and an real inspiration. Im sure you already know this and if the boot was on the other foot you would have done the same for him.

Well, to be fair, AJ was still buzzing from the 28 point lead he now has in the postie championship.... Great jesture though...

**Peter Smith** · 11th September 2009, 08:12

Originally Posted by mossy1200

I got Carrillo conrods,race crank,cams and flatslides coming and considering total loss.

I already consider you a total loss, so that part is already done.
Seriously though you have been bitten hard by the postie bug, I hope it all works out well.

**zxr400#150** · 11th September 2009, 17:38

[QUOTE=quickbuck;1129399519]

Originally Posted by Duke girl

Well, to be fair, AJ was still buzzing from the 28 point lead he now has in the postie championship.... Great jesture though...

32point lead actually, those 4 extra points may come in handy lol,
but yea would be nice if we could each take a championship! Chappell Domination. but not counting my chickens yet, still have two more rounds to go

**Duke girl** · 11th September 2009, 17:45

[QUOTE=zxr400#150;1129400547]

Originally Posted by quickbuck

32point lead actually, those 4 extra points may come in handy lol,
but yea would be nice if we could each take a championship! Chappell Domination. but not counting my chickens yet, still have two more rounds to go

Keep going the way you are AJ and you have got it in the bag I would say. Good luck Matey for the remainding Rounds.

**zxr400#150** · 11th September 2009, 18:55

[QUOTE=Duke girl;1129400557]

Originally Posted by zxr400#150

Keep going the way you are AJ and you have got it in the bag I would say. Good luck Matey for the remainding Rounds.

Fingers crossed, thanks skip!

**neil_cb125t** · 11th September 2009, 22:53

Originally Posted by mossy1200

Is there anywhere in NZ that lightens cranks that are highly recommended.
APE charge $300 usd approx plus freight for knife edge ,lighten and balance.

Hey,

i got all my work done at Collier motors in levin - i just had my crank balanced which was $150 nz approx..... recommend them bloody great service.

Thread: Chappy's round 4 - day to forget

Thread Tools

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions