Bucket bits 4 sale

**steveyb** · 1st June 2013, 16:28

1 x pair used 125GP Bridgestone slicks YDC compound.
1 x used Bridgestone rear rain. A bit worn in middle, but sides still fair.

PM me.

Cheers.

**L.B** · 2nd June 2013, 13:44

http://www.trademe.co.nz/motors/moto...-599127354.htm

**600rr420** · 5th June 2013, 19:43

honda 110 for sale

brought a year ago intending to do it up and race. was running when i brought her, now doesnt start and i dont have then time to tinker.
$450 and its yours plus ill throw in a 17" alloy rim too
0274 914 914
cheers

**davebullet** · 17th June 2013, 18:08

1979 or 1980 Suzuki GT125
Parallel twin 2-stroke
Not registered or warranted
Suit restoration or bucket racer
Parts complete except for the clutch cable cover (see left hand side)
Wiring loom intact (so could be cut for racing) or used to restore
Kick start (no electric with this model) but easy to turnover
comes with spare rims and tyres

Starts 1st or 2nd kick

Work I've done:
- New MotoBatt battery
- forks straightened and new seals
- new front brake master cylinder

Take a look in here:
http://www.kiwibiker.co.nz/forums/al...p?albumid=4652

PM me offers,
Thanks!

**quallman1234** · 19th June 2013, 08:01

Anyone got a stock FXR throttle cable?

**John_H** · 19th June 2013, 19:59

Originally Posted by quallman1234

Anyone got a stock FXR throttle cable?

I'll have a rummage around for you.

**quallman1234** · 20th June 2013, 13:25

Originally Posted by John_H

I'll have a rummage around for you.

Don't try too hard. For a mate of a mate.

Thanks tho!

**quallman1234** · 23rd June 2013, 20:19

You name it i've probably got it. Excluding engine parts.

Several sets of rims for sale, with discs.

**Dutchee** · 24th June 2013, 08:08

Originally Posted by quallman1234

You name it i've probably got it. Excluding engine parts.

Several sets of rims for sale, with discs.

Tank? Betchya not

**steveyb** · 24th June 2013, 11:12

Hi all.
You wanna step up the appearance and feel of your Bucket MotoGP racer?
Got an RS125 chassis bike, but want the later model tank for it?

I am making gas tanks for the NX4 2000+ model RS125 (the flat top, flush mount cap ones) if anyone is interested.
Can make them in regular GRP, Carbon/Kevlar (recommended for strength, abrasion resistance and weight), or Carbon (more difficult to work, light but a bit weaker, needs to be reinforced).
Will use vinyl ester resin or epoxy resin (for chemical i.e. fuel, resistance) depending on customer preference.
Will not be able to guarantee that the finish will be perfect, so the tanks will likely require a bit of finishing and painting.
Customers will have to fit their own fuel cap, spigots/tap and breather.
Can be supplied with anti-slosh foam if desired.

NX4 tanks are almost impossible to find these days and cost moonbeams if you can find one, especially the later model ones.
I think that the NX4 tank will fit onto the NF4 chassis and you will be able to make it fit your CBR's and FXR's I am sure.
For the latter you might need a custom base, which can be done with some effort.

But, don't all rush at once, I don't have the time or facilities to make hundreds of them.

Steve
Moto Academy NZ
Innovative Moto Developments IMD250
021924493

GRP: $450 + GST
Carbon/Kevlar: $495 + GST
Carbon: $595 + GST

PS I still have tyres available as listed earlier.

**Billy** · 25th June 2013, 15:21

2007 RS 125 fairing kits for sale,

As pictured below but finished in satin black etch primer,Top section,Bellypan and tailpiece,Brand new,Easy fit to NF4 or other models.Can do front guard if required.

In stock and ready to go $500.00

Contact me @ acrfibreglass@actrix.co.nz

Click image for larger version.

Name: Honda RS125.jpg
Views: 44
Size: 96.8 KB
ID: 284307

**Yow Ling** · 25th June 2013, 18:55

Originally Posted by Billy

2007 RS 125 fairing kits for sale,

As pictured below but finished in satin black etch primer,Top section,Bellypan and tailpiece,Brand new,Easy fit to NF4 or other models.Can do front guard if required.

In stock and ready to go $500.00

Contact me @ acrfibreglass@actrix.co.nz

They look pretty flash !! great price too

**Clivoris** · 30th June 2013, 14:38

Click image for larger version.

Name: 002.jpg
Views: 35
Size: 304.3 KB
ID: 284447

As seen. This has got some crash protection sorted and been ridden in C-grade and rather bravely in B-grade. The truth is it's pretty much a very user friendly learner bucket just to get someone on the track. I want $300 for it. If anyone is interested I will drag it out from the shed and ensure it is running etc. Last used over 6 months ago and it ran well. New battery 12 months ago. Very easy to ride. Not much ground clearance.

**quallman1234** · 1st July 2013, 14:59

Alright, no more pissing around.

I have a Rolling FXR Frame for sale.

Complete and can come with fairings if you wish. Rego on hold, will cancel it if you dont want it.
Only thing its is missing is foot pegs/rearsets/rear caliper. Will 1$ reserve it soon, or make me an offer early now.
Perhaps buy it for the wheels and scrap the frame? Or make a road legal sleeper?

**RMS eng** · 1st July 2013, 17:01

selling my RG50 frame set as a race bike no wheels or motor also have spare frame,and a RG50 motor made into a 80 has DS80 crank andwater cooled cylinder,needs finishing and TLC,was finished in a hurry to put on dyno 20 + years ago made 14 hp with slipping clutch ,good for RG50 parts or B grade motor.make an offer PH chris P 09 817 9500