Bucket update

[ajturbo]

Hey Skunk
I see that the boys got the 125 twin running so the cam timing must be right.
Next thing they need are 2 x CRF70 pistons and a 3mm overbore, we won't see which way it goes.

Are you bringing your ZXR weapon to the next round? It would be good if one bike with a GL145 motor turned some laps, not talking about anyone in particular aye!

i have just pulled it apart AGAIN.. i need a base gasket... where would i get one?? ( have no idea)
and i'm waiting for the piston to arive from england for the GT.....

Spill Sully60... who are you?

crash king!

[Sully60]

Just make one, I have done about five of these (read between the lines -cheapskate) If you can find .5mm gasket paper or thinner. These motors respond to bumping up the compression a bit. If you need a hand just PM me I only live around the corner

[bungbung]

i have just pulled it apart AGAIN.. i need a base gasket... where would i get one?? ( have no idea)
and i'm waiting for the piston to arive from england for the GT.....




crash king!

Is it a twin or a single?
I've got a cb125/xl125 single base gasket you can have

[Ivan]

No, I saw the aftermath of it,

Not nice tho seeing heapsa people you know lying there like that,

I remember you hobbling on that leg you Hyper extended?

And yeah Ill be atbucketsagain soon Craig, Kinda want to get this Vic season finished first, because Im doing so shit at the mo I want to concentrate on this final half


Sweet as I wanna test my bucket out now

[bungbung]

It would be good if one bike with a GL145 motor turned some laps

Fear the power: TZR145

Needs engine and exhaust mounts and some minor tidying.
Anyone got a FZR rear sprocket for a 428 chain?

[ajturbo]

Just make one, I have done about five of these (read between the lines -cheapskate) If you can find .5mm gasket paper or thinner. These motors respond to bumping up the compression a bit. If you need a hand just PM me I only live around the corner

PM on the way....

Is it a twin or a single?
I've got a cb125/xl125 single base gasket you can have

it's a mighty TWIN......

[Sully60]

I can find one for you Bung Bung. How many tooths do you need?

[bungbung]

Cheers, quite small, 46 or 47 ish.

[Slingshot]

Just make one, I have done about five of these (read between the lines -cheapskate) If you can find .5mm gasket paper or thinner. These motors respond to bumping up the compression a bit. If you need a hand just PM me I only live around the corner

You up in Newlands too? Sounds like we need to have someone build a bucket track up here, would be mint!!

Organised the freight on my new bucket today, should be here by the end of the week.
Just need to find an engine now.

Have taken Friday off so I can sit in the garage and tinker.

[Ivan]

Mean,


I would love to see a V twin 150 bucket,


But I cant do it because it will be another project that takes to long to complete

Shame I dont live over the hill way and have someone kick my arse into gear and finsh it

But Pics are here now

[Skunk]

Shame I dont live over the hill way and have someone kick my arse into gear and finsh it

Ivan... that bike was a runner when I last saw it. Only difference was you didn't own it.

[Ivan]

Bike still is a runner,


And hahaha It was a dragbike no good for left hand corners it scraped the chamber constantly

[Sketchy_Racer]

Comon guys!

Who has a Master cylinder. Its for your own good. cause if no one gives me one, im gonna race the bastard with out front brakes!!

I can sort the tyre, and wheel bearings myself.. maybe..

[JayRacer37]

Comon guys!

Who has a Master cylinder. Its for your own good. cause if no one gives me one, im gonna race the bastard with out front brakes!!

Might be better like that, the last time you had front brakes on a bucket, my frame grew a hole and lost a tacho and temp gauge holder....

[gav]

So all you bucket heroes coming to BOB?