First scratch and graze repair.

[Blossom]

Very interesting idea! I might try that one and if it works, I'll only be pissed off that I didn't think of it myself.
There are better methods of repair in this case though!



You thought about getting a quote to paint the guard? It's not a big job!

What is this better method of repair you speak of? Getting a quote etc to paint the guard? I have not yet met a cheap panelbeater so assumed this small job would not be all that cheap. But then all I am basing this on is urban ledgend and being a cheap skate.

OH if useing autosol always apply it and wipe it off with a terry cloth type of rag for best results,

Thanks.. I am sure I have some old tea towels round here somewhere....

[FJRider]

Scratches on mud guards can be hidden by strategically placed stickers...
Careful, Autosol IS an abrasive... Brasso is not as abrasive...

[FJRider]

Damage is really really minimal and was prevented in large by landing mostly on my saddle bags.
However... Small Scratches to the indicator and end of handlebar
graze on chrome mirror and clutch lever
graze/scratch on front left mudguard.

So any links to info on how to polish out chrome grazes and info on how/if one can repair mudguards would be greatly appreciated. I don't even know what the mudguard is made of? I am such a noob.

Maybe a trip to a bike shop for new aftermarket indicators (a pair), new hand grips (fancy ones with tassels ???) new mirrors/clutch lever.
A lot of the non standard aftermarket stuff isn't that expensive...

[Blossom]

Not sure about that sticker idea.. sounds dodgy...

The clutch is the only thing that I would actually consider replacing the rest are so minimal it just would not be worth it (unless of course my OCD kicks in then anything is possible) but I will have a look about and see what I can find.

[Blossom]

The mudguard is black plastic all the way through so no other colour issues to deal with. I have wet sanded the scratch smooth with 2000grit and then as it didn't look as bad as I thought I tried filling with black wax repair stuff.. Worked a treat. Only thing to do now is buff out the hazing from the sanding.. What compound is best to use? I dont have a buffer but could proberly rig one up using the angle grinder or something if I had too.

And I notice a lot of people using pledge? as an after polish.... does it make the plastic shiny or something?

(blossom is a complete noob)

Thanks everyone

[FJRider]

You could try spray on clear... ???

[hayd3n]

i just use tyre shine on everything but tyres and seat
its silicon based and repels water

[laserracer]

i dont think i would use an angle grinder not unless it has a speed control as most angle grinders are to fast and will burn the paint, probably cut it by hand, i use a chemical cutter called deox i dont think you can buy it retail, you want a fairly mild cutter, you may be able to polish out the hazing but it depends how bad it is, yep silicone will hide the hazing but a huge no..no if you ever want to paint that part as silicone and new paint DONT mix

[hayd3n]

i dont think i would use an angle grinder not unless it has a speed control as most angle grinders are to fast and will burn the paint, probably cut it by hand, i use a chemical cutter called deox i dont think you can buy it retail, you want a fairly mild cutter, you may be able to polish out the hazing but it depends how bad it is, yep silicone will hide the hazing but a huge no..no if you ever want to paint that part as silicone and new paint DONT mix

just for plastic not paint

[laserracer]

yeah on plastic is fine

[Owl]

What is this better method of repair you speak of? Getting a quote etc to paint the guard? I have not yet met a cheap panelbeater so assumed this small job would not be all that cheap. But then all I am basing this on is urban ledgend and being a cheap skate.

I knew I shouldn't have posted that! There is a better method Blossom, but unfortunately you don't have a prayer of pulling it off. Hell, if you were local, I'd spray for $50 just for opening my big mouth.

[blossomsowner]

I knew I shouldn't have posted that! There is a better method Blossom, but unfortunately you don't have a prayer of pulling it off. Hell, if you were local, I'd spray for $50 just for opening my big mouth.

does this mean you are a proper skilled type auto painter person????????
always handy to know these things for when paint job gets boring......

[Owl]

does this mean you are a proper skilled type auto painter person????????
always handy to know these things for when paint job gets boring......

Yep, but generally don't piss about with bike stuff unless it's my own!

[Blossom]

I knew I shouldn't have posted that! There is a better method Blossom, but unfortunately you don't have a prayer of pulling it off. Hell, if you were local, I'd spray for $50 just for opening my big mouth.

Well I have to say that I have had an absolute blast of a time playing about with compounds, wax, sandpaper, paint and plastic polish.
Having lots of success so far. I feel a bit like the mad scientist.
But liking 'plastix' polish lots, and pledge eh..who would've guessed how usefull that stuff is. So once I finish practicing on other plastic things.. (there must be an old indicator round here somewhere right?)I am going to have a go on the scratches on the indicator casing and then on the wing mirror and clutch.
It really is a bit scary how much I am enjoying myself actually.

[Owl]

Well I have to say that I have had an absolute blast of a time playing about with compounds, wax, sandpaper, paint and plastic polish.
Having lots of success so far. I feel a bit like the mad scientist.
But liking 'plastix' polish lots, and pledge eh..who would've guessed how usefull that stuff is. So once I finish practicing on other plastic things.. (there must be an old indicator round here somewhere right?)I am going to have a go on the scratches on the indicator casing and then on the wing mirror and clutch.
It really is a bit scary how much I am enjoying myself actually.

Way to go Blossom and you're on the right track. 10 points for effort!
If your clutch lever has gouges on it, you'll fix that easily. Any black plastic will no doubt be textured, so be aware that you'll end up with a smooth spot. If the indicator lense is scratched, you'll fix that with ease too. Good luck!