Bucket bits wanted & services needed

[quallman1234]

I often see people advertise that they are in need of something, in the Bucket bits 4 sale thread.

Too keep the original Buckets bits 4 sale thread nice and clean. Maybe we could use a new thread. (E.g this one). To post if you need a specific part or Service (welding etc).
Please structure your posts, as i know most people are after things.

Services Available (obviously for some $$$ but not much):

PM me if you have something.

[Trudes]

I want an RG50 front mudguard... anyone?

[SHELRACING]

It has been suggested we start a Bucket bits wanted, so here it is, hope it turns out as useful as the for sale thread.

:wari::wari::wari:

[SHELRACING]

And to start the ball rolling.

Mrs Wobbler says I need a new challenge, (as if she ain't challenging enuf)

Looking for a Two smoke motor Suzuki GP 125, TS, ER, Yamaha RX125 going or not but prefer complete. Wot U Got ??

I'm a cheap arse bastard with too many bikes already, so not too hard on the wallet eh!

[R6_kid]

I need a spare RX125 motor. Was supposed to be buying one along with a tank for $70 but someone jumped in and clicked the re-valued buy now before I had even checked my email.

[quallman1234]

All is good. I shall get a mod to get rid of my thread hehe. :Oops:

[Spyke]

I need a front caliper and the rest that connects to it. eg lever, lines

[WarrenW]

Custom Made crash knobs, you supply a drawing and we will price 'em for you and machine them in the lathe. Also can do swingarm bobbins for stand etc. Just let me know what you want. Very reasonable prices.

[gav]

Build your own carbon fibre tank!
http://www.bayarearidersforum.com/forums/showthread.php?threadid=145975&perpage=15&pagenumber=1

C'mon Skunk, you know you want to! :yes:

[gav]

All is good. I shall get a mod to get rid of my thread hehe. :Oops:
Not a problem, will merge and sticky for you all!

[Pumba]

Build your own carbon fibre tank!
http://www.bayarearidersforum.com/forums/showthread.php?threadid=145975&perpage=15&pagenumber=1

C'mon Skunk, you know you want to! :yes:

Man I think I need to go change my pants that shit is hot.

As for things needed, a few brolly dollies wouldnt go a miss :laugh:

[Skunk]

Build your own carbon fibre tank!
http://www.bayarearidersforum.com/forums/showthread.php?threadid=145975&perpage=15&pagenumber=1

C'mon Skunk, you know you want to! :yes:
Thanks a lot - I got nothing done tonight - except reading!

[all4A50s]

I have a '84 GSXR400 frame To give away and a swing arm/shock/tank for it for $80 if anyone is interested

[R6_kid]

Almost good to go, looks like it needs a carby, some hand grips, and a seat.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-204110345.htm

[Pumba]

I have a '84 GSXR400 frame To give away and a swing arm/shock/tank for it for $80 if anyone is interested


Almost good to go, looks like it needs a carby, some hand grips, and a seat.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-204110345.htm

:doh: come on guys that is what the bucket bits for sale thread is for not this wanted thread

[bungbung]

I want an RG50 front mudguard... anyone?

I have a zxr250 guard you could try butchering

[Trudes]

I have a zxr250 guard you could try butchering

Any chance you could bring it along to buckets when you come so I can see how close it would be to fitting? Cheers!

[quallman1234]

Any chance you could bring it along to buckets when you come so I can see how close it would be to fitting? Cheers!

aha! This thread first success story. No front guard = dirty dripping face in the wet. Trust me.

[bungbung]

Any chance you could bring it along to buckets when you come so I can see how close it would be to fitting? Cheers!

Now that I think about it, zxr = USD forks. I'll bring a GL guard instead, it mounts in the traditional fashion using a plate across the crown of the guard.

[Skunk]

I have an RG guard I think. And I'd be keen on looking at the ZXR one.

[Trudes]

Sounds like a swap meet!!:niceone:

[Pumba]

While we are discussing gaurds anyone got a GSXR250 one lying around?

[quallman1234]

Whilst we are at. I also need one for my bucket. Might make it out of some cardboard or something though. Bling as!

[wbks]

If anyone has either a tank for a cb or a mudguard for a zook gt125 it would be great. Doesn't matter if it's got crap paint, just don't want any dents on either. Ofcourse, any tanks that people think may fit the cb could work, too. Thanks

[SHELRACING]

If anyone has either a tank for a cb or a mudguard for a zook gt125 it would be great. Doesn't matter if it's got crap paint, just don't want any dents on either. Ofcourse, any tanks that people think may fit the cb could work, too. Thanks

I've got a CB125 T tank, cant remember probably a bit scruffy, Oh nad the fuel tap leve is broke but I used to turn it wiv som pliers.

[wbks]

Got a pic of it?

[Ixion]

I need clipons for 33mm forks. What are the rules about making your own clipons ? Maybe I migh tbe original and fit ape hangers.

And I need a zorst for a 125 two smoker that revs to 8000 rpm.

[Pumba]

I need clipons for 33mm forks. What are the rules about making your own clipons ?

None.

10ch

[Ixion]

Good . Fetch the welder, boyo. And some strong glue.

[Trudes]

Mudguard sorted. Anyone got a RGV150 front disc?? Please!

[nudemetalz]

Is that the RGV150 disc Sully says he wants as well in the NWM Soc Group, Trudes?

[Trudes]

Nope don't think so, looks like we both need one.

[Ixion]

Mudguard sorted. Anyone got a RGV150 front disc?? Please!

Does it have to be WoF legal? Pyrocam should have one that failed compliance.

[Ixion]

Are there any rules about cutting bits off frames and welding bits on ?

And are there bucket motards.

And anyone got a Ts/C/F 125 zorst ?

EDIT: Do I *need* an exhaust?

[quallman1234]

Are there any rules about cutting bits off frames and welding bits on ?

And are there bucket motards.

And anyone got a Ts/C/F 125 zorst ?

EDIT: Do I *need* an exhaust?

Basically you can do anything as long as the bucket doesn't fall apart and this resembles a motorbike with the legal capcity etc. Some Kart tracks have specific regs however. pretty relaxed tho.

Questions Answered
1)No rules about cutting etc/welding just make sure it doesn't fall apart
2)Yes there are bucket motards
3)Yes you need a exhaust. But that can be a piece of tubing/home made. As long as its not stuipdly loud.

[Ixion]

Thank you. Chewing gum FTW.

[Trudes]

Does it have to be WoF legal? Pyrocam should have one that failed compliance.

Nope. Cheers, I'll send him a msg. :)

[Korea]

Hey bucketeers - can anyone hook me up with a gear linkage?

The box on me bucket is reverse-pattern and I want to swap to regular (too dumb to learn 1-up (to go down), rest down (to go up) er...).

The bucket is an RG150 frame but I think anything can be rigged to it.

See you at Kaitoke! :cool:

[nudemetalz]

Ahhh,... if ya gonna attach an image, Korea, make it a little bigger.....

[Skunk]

Hey bucketeers - can anyone hook me up with a gear linkage?
The bucket is an RG150 frame but I think anything can be rigged to it.
I might have a linkage like the pic. I'm not sure. The RG came with a linkage already as std didn't it?

[ajturbo]

I might have a linkage like the pic. I'm not sure. The RG came with a linkage already as std didn't it?
yes.. but it is about 3 X longer... sorry i don't have a spare...

[Korea]

Ahhh,... if ya gonna attach an image, Korea, make it a little bigger.....

My bad - the image was just for illustrative purposes in case there was some fandangle terminology for 'gear linkage' I don't know about... what's 'fandangle' anywho?

Actually, anything remotely gear-linkage-like that I can bolt, bend or weld into place so I can turn my reverse-pattern into regular pattern shifting would be great...

Here's what the existing appendage looks like:

[koba]

While we are discussing gaurds anyone got a GSXR250 one lying around?

I THINK these may be the same as a GSX250, RG150 and probably a few other similar size suzukis.

[Pumba]

RG150

With you saying that it reminds me I have got one of those lying around in my other tool shed. I will have to go dig it out and see if it fits.

[koba]

With you saying that it reminds me I have got one of those lying around in my other tool shed. I will have to go dig it out and see if it fits.

hmmm, really...?

Im a bit of a collector of these you see....

[koba]

My bad - the image was just for illustrative purposes in case there was some fandangle terminology for 'gear linkage' I don't know about... what's 'fandangle' anywho?

Actually, anything remotely gear-linkage-like that I can bolt, bend or weld into place so I can turn my reverse-pattern into regular pattern shifting would be great...

Here's what the existing appendage looks like:

You will need a long rod,
I have one but it is reserved for sombody already.

Do you have the original RG lever that pivots inboard of the footpeg?

[Pumba]

hmmm, really...?

Im a bit of a collector of these you see....

Yea it goes with the set of forks I have in my garage rafters :whistle:

[koba]

Yea it goes with the set of forks I have in my garage rafters :whistle:

Up to the rafters!
Jeeze I haven't even got past the window sills, but im still in the bedroom rather than the garage :lol:

[Skunk]

My bad - the image was just for illustrative purposes in case there was some fandangle terminology for 'gear linkage' I don't know about... what's 'fandangle' anywho?

Actually, anything remotely gear-linkage-like that I can bolt, bend or weld into place so I can turn my reverse-pattern into regular pattern shifting would be great...

Here's what the existing appendage looks like:

Well I didn't get to look for it - the RD350LC filled the gearbox with oil and water; draining the radiator at the same time. I will look tomorrow though.

[Kendog]

the RD350LC filled the gearbox with oil and water; draining the radiator at the same time.

I don't have much experience with these types of things yet, but that sounds bad :(

[Korea]

You will need a long rod,
I have one but it is reserved for sombody already.

Do you have the original RG lever that pivots inboard of the footpeg?
(trying my hardest not to make overly obvious innuendo wise-cracks :whistle:) Nope, no original lever :( no rod either... :weep:


With you saying that it reminds me I have got one of those lying around in my other tool shed. I will have to go dig it out and see if it fits.

Well I didn't get to look for it - the RD350LC filled the gearbox with oil and water; draining the radiator at the same time. I will look tomorrow though.
Thanks guys - much appreciated~

[quallman1234]

You could make your own simple one. By rotating the one you already have on there but make it go the other way and then bend it around to suit/extent it if need be.
Will look rather interesting but it would work.

I sold mine too Pete jones! :no:

[koba]

(trying my hardest not to make overly obvious innuendo wise-cracks :whistle:) Nope, no original lever :( no rod either... :weep:



Thanks guys - much appreciated~


You could make your own simple one. By rotating the one you already have on there but make it go the other way and then bend it around to suit/extent it if need be.
Will look rather interesting but it would work.

I sold mine too Pete jones! :no:

Na, It will need another pivot point.
If you can find a standard lever, assuming the footpeg is still right for it, you can reverse it easy.
I fucked for time at the moment but if you know someone with lathe and welder access you might be able to get one made up.
I can give you the diamensions.
the longer rod is easy enough to make, I could probably do that if you give me the diamensions but it will be ages untill I can get to it.

Learning reverse shift is probably easier.
You will learn to love it, the key is to kinda make a positive mental switch into "bucket mode".

[Korea]

Learning reverse shift is probably easier.
You will learn to love it, the key is to kinda make a positive mental switch into "bucket mode".
Yeah, I'm coming to that realisation myself - it should be easier to make the transition now that the bucket's my only ride. Still, there will be definitely be some embarrasing "RIIIIIIIIIIIING-A-DINGDINGDING!!!" when I inevitably change 'down' when I mean 'up' during the transition period - watch out :laugh:

Keep an eye out for any loose linkages lying around tho' - I will aim to set it up at some point, just maybe not in time for 15th / 22nd... Cheers :niceone:

[quallman1234]

Na, It will need another pivot point.
If you can find a standard lever, assuming the footpeg is still right for it, you can reverse it easy.
I fucked for time at the moment but if you know someone with lathe and welder access you might be able to get one made up.
I can give you the diamensions.
the longer rod is easy enough to make, I could probably do that if you give me the diamensions but it will be ages untill I can get to it.

Learning reverse shift is probably easier.
You will learn to love it, the key is to kinda make a positive mental switch into "bucket mode".

Lack of thinking on my part. Duh!

By the end of a day at the buckets. You should roughly be there. Like Koba said its actually fantastic because you can go from road mode to race mode in your head easily with backwards gear shifting.

ANYONE GOT A TAIL PIECE i can buy?

[Trudes]

Anyone have a standard MB100 carb or even a float and float needle they are not in need of? Please and thank you!

[Skunk]

Anyone have a standard MB100 carb or even a float and float needle they are not in need of? Please and thank you!
And urgent...

[quallman1234]

Try Bucket and Bits if your super keen. Im fairly sure he had a MB100 in bits. Expect to pay for it.

[nudemetalz]

Yes, although he has mostly what you want, Bryce is not known for value for money.....

[Trudes]

Well, I've sent him an email to see what he has and how much he wants. Thanks Kyle.

[Trudes]

Anyone have a standard MB100 carb or even a float and float needle they are not in need of? Please and thank you!

Sorted!!! Yahhh!! Thanks Kyle and Bryce!:niceone:

[TZ350]

TF100 motor or bottom end wanted, must be a 100, any condition. Pls PM me.......:devil2:

[SVboy]

Anybody have some factory FXR bar ends?

[lovesracingbikes]

My Honda 100cc motor is dead. :doh:
Anyone have another 100cc or 50cc 2stroke they dont want?

[all4A50s]

Can anyone help out/sell me a set of points/condenser for a Yamaha RX125?

[koba]

Can anyone help out/sell me a set of points/condenser for a Yamaha RX125?

I got nutty and rebuilt an A100 set.
Its a bit fidly but it can be done, I am on good terms with the local Repco staff and got them to find a set of points that the contacts and brush matched the A100 best, It was a set for a Mazda RX3.
I grafted the mazda bits onto the original A100 set I had...
It took a fair bit of careful work to sort but works ok.
I was going to graft another condenser on by heating the old soldered on one off and relpacing it with a new one (ford laser coz it was the cheapest) but the old one was good enough.

Its alot of pissing about but OK if you are stuck.

Maybe try buckets and bits for proper RX125 ones, I will also ask a guy I know who has owned many little yammy 'strokers.

[Pumba]

Just on the off chance, FXR tail fairings? Really all I am after is the front part up by the tank, dont really car how smashed up it is.

And I will be honest I dont want to pay a lot for it if anything

[Pumba]

Just on the off chance, FXR tail fairings? Really all I am after is the front part up by the tank, dont really car how smashed up it is.

And I will be honest I dont want to pay a lot for it if anything

Really no one:weep:

Surely someone has some smashed up pieces in the corner

[Buckets4Me]

Really no one:weep:

Surely someone has some smashed up pieces in the corner

ask Zak :girlfight::Pokey:

[MsKABC]

Does anyone have lying around a tailpiece that could be made to fit this? Happy to pay, but not millions :D Doesn't have to be flash. We can make something if necessary, but it would be easier not to!

[nudemetalz]

I have something that may be of use.
It's my old small purple piece (ha, that sounds dodgy...)

Anyway, I replaced the tailpiece when Lady Penelope got a makeover and new paint job.

[MsKABC]

I have something that may be of use.
It's my old small purple piece (ha, that sounds dodgy...)

Anyway, I replaced the tailpiece when Lady Penelope got a makeover and new paint job.

:lol:

I'll have a chat to the chief mechanic and see if he is happy with me having your old small purple piece :rofl: Funny, coz I was actually thinking of painting the banana purple! Will PM you later perhaps. Cheers :D

[DELLORTO]

:lol:

I'll have a chat to the chief mechanic and see if he is happy with me having your old small purple piece :rofl: Funny, coz I was actually thinking of painting the banana purple! Will PM you later perhaps. Cheers :D

purple !!! we'll have to call it the "egg plant" lol :clap:

[MsKABC]

purple !!! we'll have to call it the "egg plant" lol :clap:

Oi! Watch it ya young whippersnapper! :spanking: If I have any purple left over, I might be tempted to execute a covert operation to paint someone's FXR...:devil2:

[MsKABC]

Tailpiece now sorted, big thanks to Mr. Nudemetalz. :hug: I'll post up a pic when it's fitted. :D

[Pumba]

Tailpiece now sorted, big thanks to Mr. Nudemetalz. :hug: I'll post up a pic when it's fitted. :D

Hey do you want me to pick that up this weekend for you seeing as I am down there?

Might save ya a bit of frieght.

[MsKABC]

Hey do you want me to pick that up this weekend for you seeing as I am down there?

Might save ya a bit of frieght.

Thanks for the very kind offer :D, but it's already on its way, should be here on Saturday :clap: Didn't cost too much fortunately.

[MsKABC]

...piece! Take a good look, so that you recognise it when you lap me! :lol:

Huge thanks to Nudemetalz for donating Lady Penelope's old derriere! :D The old Banana may yet be given a new lease on life :niceone:

[DELLORTO]

...piece! Take a good look, so that you recognise it when you lap me! :lol:

Huge thanks to Nudemetalz for donating Lady Penelope's old derriere! :D The old Banana may yet be given a new lease on life :niceone:

looking good.....:woohoo: nice to see it has a proud new owner

i hope your coming to mt wellington!

[Bren_chch]

hey

After a fxr150 bottom end or complete motor if its fvcked up top.

Cheers

[SHELRACING]

hey

After a fxr150 bottom end or complete motor if its fvcked up top.

Cheers


Another one already !! you fellas must ride em hard out down there :crazy:

[SHELRACING]

Anyone gor a good set of forks ideally 37mm, or 38mm will do. 750 - 800mm long. Don't mind replacing the seals as long as the chrome is good and they're straight.

Cheers

[DELLORTO]

Anyone gor a good set of forks ideally 37mm, or 38mm will do. 750 - 800mm long. Don't mind replacing the seals as long as the chrome is good and they're straight.

Cheers

ive got a pair of gsxr250 forks that are in good conditon, they have double disk brakes ect

[SHELRACING]

Anyone gor a good set of forks ideally 37mm, or 38mm will do. 750 - 800mm long. Don't mind replacing the seals as long as the chrome is good and they're straight.

Cheers


All sorted thanks to Dellorto :2thumbsup

[wbks]

Anyone know of any good front tires to suit 2.75-18?

[Yow Ling]

Anyone know of any good front tires to suit 2.75-18?

Yup Avon make a race tyre in that size, lots of classic guys use them , about $400 for a front

[Skunk]

Yup Avon make a race tyre in that size, lots of classic guys use them , about $400 for a front
Very funny Mr money bags...

[sidwyz]

Just after an engine for honda gl145 any condition considered or just parts, head, cam ect.

[Yow Ling]

Very funny Mr money bags...

It the reason most people run 17"s, I try to pay $100 for a set. I think you can still get BT39s in 18"

[Skunk]

I used Vee Rubber. Cheap and it works.

[wbks]

I used Vee Rubber. Cheap and it works.Not nylon, is it? Where do they sell them?

[Skunk]

Not nylon, is it? Where do they sell them?
Motorcycle shops. ;)

Every shop down here CAN get them. And yes, nylon. Fine on a bucket unless your some sort of Rossi - in which case you'd have already have USD forks, disc brakes all round, alloy frame etc.

[wbks]

I was under the impression nylon are crap...

[quallman1234]

I used <b> Vee Rubber. </b>Cheap and it works.


And yes, <b>nylon.</b>

The irony?

Decent nylon tyres are pretty good, i rode a bike with Conti go's on it the other day. And it was fine, knee down and all, did start sliding the front a little.

Rubbers always good tho.

[Skunk]

Decent nylon tyres are pretty good, i rode a bike with Conti go's on it the other day. And it was fine, knee down and all, did start sliding the front a little.
Yeah, you fair pushed those A-graders along on that. And you didn't bin out.

[wbks]

for no apparant reason my current nylon front just slid out at what had to be a 5 degree lean angle at 5km/h. I'll admit they were cold, and are bald, but it was dry... Hope that doesn't happen with these "vee rubber"'s... They aren't that bad are they?

[Skunk]

for no apparant reason my current nylon front just slid out at what had to be a 5 degree lean angle at 5km/h. I'll admit they were cold, and are bald, but it was dry... Hope that doesn't happen with these "vee rubber"'s... They aren't that bad are they?
No one (and I mean no one) has ever binned on my AX1R.

[koba]

for no apparant reason my current nylon front just slid out at what had to be a 5 degree lean angle at 5km/h. I'll admit they were cold, and are bald, but it was dry... Hope that doesn't happen with these "vee rubber"'s... They aren't that bad are they?

That does sound somewhat exagerated...
Th best slicks in the world will be totally shit once they are ten years old, have been thru a million heat cycles and are totally bald.

I would say try the vee rubbers, I am sure while they are not the flashest they will be miles better than what you have got.
Once you can use average tyres to their potential then start getting into he flash ones.

[Yow Ling]

Sully rode last years battle of the buckets on Vee Rubber, it was raining and snowing , he didnt like them but finished alright

[Yow Ling]

Does anyone have a MB50 ignition to sell me? prefer with stator rotor and cdi, could possibly swap for mb100 or some other trinkets, 28mm flat slide tm28 maybe .thanks

[Skunk]

Does anyone have a MB50 ignition to sell me? prefer with stator rotor and cdi, could possibly swap for mb100 or some other trinkets, 28mm flat slide tm28 maybe .thanks
PM Trudes if she doesn't read this first. I think she has an MB50 in bits...

[Trudes]

I'm stuck out of town at the moment, but if you ask Kendog real nice he might pop down to my "Pile of shit" in the garage and see if there is anything that might suit in there, otherwise I'll be home Saturday (Someone might need to remind me to have a lookie!)

[Kendog]

I'm stuck out of town at the moment, but if you ask Kendog real nice he might pop down to my "Pile of shit" in the garage and see if there is anything that might suit in there, otherwise I'll be home Saturday (Someone might need to remind me to have a lookie!)

Where is the 'Pile of shit'? If I went down and had a guy look I would never fine it :pinch:

[Sully60]

Sully rode last years battle of the buckets on Vee Rubber, it was raining and snowing , he didnt like them but finished alright

My puckered arse was sucking me onto the track!

[wbks]

Anyone got a tank, preferably without any deep dents or anything more than surface rust, for a honda cb?

[Bren_chch]

My puckered arse was sucking me onto the track!

:laugh::laugh:

[MsKABC]

My puckered arse was sucking me onto the track!

And the hot air coming out the other end of you was also pushing you down! :bleh:

[Sully60]

And the hot air coming out the other end of you was also pushing you down! :bleh:

If it wasn't for that hot air I may not have finished:cold:

Smart cow, moooo!

[Trudes]

Where is the 'Pile of shit'? If I went down and had a guy look I would never fine it :pinch:

Round by Blue Poo in a box, there's two boxes of crap, one's my box of crap, the other is Sully's pile of crap. Have a lookie, with your eyes!! :laugh:

[Geriatric]

Looking for a 1988(ish) GSXR250 RHside footpeg for my #76. Needed for this Sunday for Slipway. Can anyone assist please.

[SHELRACING]

Anyone got a good condition, set of handlebars 7/8 Dia and 650mm or wider, Chrome or alloy. reasonably flat (not much rise) max height sim to the SV bars in the pic.

Happy to pay but not the ridiculous shop prices.

Cheers
Steve

[Trudes]

Anyone got a good condition, set of handlebars 7/8 Dia and 650mm or wider, Chrome or alloy. reasonably flat (not much rise) max height sim to the SV bars in the pic.

Happy to pay but not the ridiculous shop prices.

Cheers
Steve

I think I still have the stock bars off my Hornet hanging around here somewhere.... would they work for you?

[Trudes]

Does anyone have a MB50 ignition to sell me? prefer with stator rotor and cdi, could possibly swap for mb100 or some other trinkets, 28mm flat slide tm28 maybe .thanks

I haven't forgotten this, just haven't had a chance to look, are you still looking for one?

[Hazzard]

Im after a fxr top fairing. Not worried about condition (im gonna rip a mold off it!) just needs to be mostly there. Thanks.

[phoenixgtr]

Im after a fxr top fairing. Not worried about condition (im gonna rip a mold off it!) just needs to be mostly there. Thanks.

I sent you a PM mate

[Henk]

Anyone got a starter bucket in the Auckland area for sale for not stupid money? more interested in reasonably reliable than super fast?

[quallman1234]

Im after a rear shock. If anyone has something suitable. Eye to Eye is quite small. For an RS50 frame 94'ish.

[Skunk]

Im after a rear shock. If anyone has something suitable. Eye to Eye is quite small. For an RS50 frame 94'ish.
Eye to eye is what measurement? I have a few bits laying around... Is it short travel at the shock?

[SHELRACING]

Anyone got a carb for an RX 125. standard carb will do, a 24mm flat slide would be nice ( no I'm not joking )

[Hazzard]

Im looking for any RGV 150 engine parts that might be lurking out there. If you have something of interest give me a shout. Thanks.

[Bren_chch]

Im looking for any RGV 150 engine parts that might be lurking out there. If you have something of interest give me a shout. Thanks.

i've got a brand new piston kit (rings, pin, clips etc)for an rgv 150, its +.25os, swap ya for one of your later model rs125 tail units. :)

[Hazzard]

I would love to Brendan, but unfortunately mines been sleeved down to 125 sorry. Thanks for the offer though.

[gav]

Im after a fxr top fairing. Not worried about condition (im gonna rip a mold off it!) just needs to be mostly there. Thanks.
You want to borrow one?

[Bren_chch]

I would love to Brendan, but unfortunately mines been sleeved down to 125 sorry. Thanks for the offer though.

ahhh eee ooooo ok, na cant help with that sorry! OHHH did you buy that fine example of a F4 race bike from that TonyMac?

[timg]

ahhh eee ooooo ok, na cant help with that sorry! OHHH did you buy that fine example of a F4 race bike from that TonyMac? Yep, that's the one.

[Bren_chch]

noiiice! i wanted but was to broke!

[Hazzard]

Yes i got Tonys one. Motor is being rebuilt as we speak ,but i was just looking around for any extra bits that may be needed in the future.
Gav- i was looking for a FXR top fairing but i ended up buying a cheap one on TM so new molds are on the way for fxr owners!

[phoenixgtr]

I'm on the hunt for a used 125GP front slick. The one I'm currently running is a 2002 vintage and is as hard as a rock...it did cost me nothing though.

95/70-17

[Buddha#81]

The one I'm currently running is a 2002 vintage and is as hard as a rock...it did cost me nothing though.

Yeah it did.....a hole in ya leathers and a manky exhaust!:lol:

[ajturbo]

I'm on the hunt for a used 125GP front slick. The one I'm currently running is a 2002 vintage and is as hard as a rock...it did cost me nothing though.

95/70-17
PM "StevyB"... i am sure he will have a few spare by now...

[koba]

I'm on the hunt for a used 125GP front slick. The one I'm currently running is a 2002 vintage and is as hard as a rock...it did cost me nothing though.

95/70-17


And if he doesn't have any available try "gimpy" (Jason Easton)

[phoenixgtr]

Yeah it did.....a hole in ya leathers and a manky exhaust!:lol:

Haha. Good point.

Thanks AJ. I'll give him a try.

[andrew a]

Hi every one I'm looking for an FXR rear brake mount. The pice that the axle goes through and the brake caliper bolts to. Thanks for your help.

[ajturbo]

what for???

who uses the rear brakes??

think of the weight your saving...

[Bren_chch]

Hi every one I'm looking for an FXR rear brake mount. The pice that the axle goes through and the brake caliper bolts to. Thanks for your help.

I think we have one, will check this arvo and get back to you.

[quallman1234]

Hi every one I'm looking for an FXR rear brake mount. The pice that the axle goes through and the brake caliper bolts to. Thanks for your help.

RG150's are the same type. I have a spare, will you be at slipways?

[ajturbo]

WTF..

a scooter????

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Scooters/auction-223604012.htm

[Skunk]

WTF..

a scooter????

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Scooters/auction-223604012.htm
That's a tidy one AJ. You should buy it and see how long it lasts! :lol:

[quallman1234]

That's a tidy one AJ. You should buy it and see how long it lasts! :lol:
NWM's troublemaker

[ajturbo]

hey all...

i need a front disc for the RG50....

[Pumba]

Looking round for a set of race wets, if anyone knows or has anthing point it in my direction please

[quallman1234]

Looking round for a set of race wets, if anyone knows or has anthing point it in my direction please

Try SteveyB, Billy or Jason Easton on here. They might have something, although wet's tend to last a little longer than slicks. Generally speaking.

[Bert]

hey all...

i need a front disc for the RG50....

AJ, I've got one in the back of my shed i think ??? I'll check and get back to you.


On the other side, I've got a guy (another Wellington boy looking to start buckets) he looking for a tf/s 125 motor to go in my oldold bike, does anyone have a bottom end or full motor sitting around ?

Cheers
Brent

[Pumba]

although wet's tend to last a little longer than slicks. Generally speaking.

Yea quite aware of that problem, will drop those guys a message and see what I come up with

[UNSTABLE]

Hey everyone, looking for a rear disc (and bolts...) for an FXR150. RG/RGV250 are the same also, anyone got one lying around they want to part with? Doesn't need to be flash, I have never even used the rear brake, but I think the scrutineers want to see one there...

Cheers, Robert.

[TZ350]

.

Looking for a set of fresh RS125 slick's for my bucket.

.

[SHELRACING]

.

Looking for a set of fresh RS125 slick's for my bucket.

.

Me too, looking for a good rear slick.

[speedpro]

hey all...

i need a front disc for the RG50....

NZ250 discs bolt straight on. you will need to have a bit welded to the caliper mounting bracket to move the caliper out but it is well worth the effort.

[speedpro]

.

Looking for a set of fresh RS125 slick's for my bucket.

.

Go and buy a set of Bridgestones, then you will have no excuse for going slow.

[TZ350]

Go and buy a set of Bridgestones, then you will have no excuse for going slow.

No excuse, I'm imaginative, I will be able to think of something. Oooo By the way where do you get new Bridgestones?

[speedpro]

Check the web. I bought mine through Henderson Yamaha when i was there but i think Cycletreads have them as well. VERY good price compared to Dunlops.

[ajturbo]

nz250 discs bolt straight on. You will need to have a bit welded to the caliper mounting bracket to move the caliper out but it is well worth the effort.
thanks matey!!!!!!!!!!!!!!!!!!!!

[Buckets4Me]

Go and buy a set of Bridgestones, then you will have no excuse for going slow.

I can think of 4 that he may use
all close together and floating around the sholder area :pinch:

[ajturbo]

i need a "new" pipe for the RG50...

if any one has something can you please contact me...

have beer...mmm





























well did have beer...

[Ivan]

only place I thought of a good place to post anyone got a old ct110 or 90 or anything similar they dont want.

[Hazzard]

Im looking for some CBR 125/150 parts- wiring loom,fuel tank, radiator. Just let me know what you have in any condition please.

[quallman1234]

Im looking for some CBR 125/150 parts- wiring loom,fuel tank, radiator. Just let me know what you have in any condition please.

http://www.trademe.co.nz/Members/Listings.aspx?member=2013420

Hope that helps.

[Hazzard]

Thanks. I had a chat to that guy but he doesnt have what i need, bummer.

[quallman1234]

Thanks. I had a chat to that guy but he doesnt have what i need, bummer.

PM Ivan on here, he has a friend with a CBR150. Might have something as it was turned into a bucket i believe

[Hazzard]

Thanks Quallman!

[quallman1234]

Thanks Quallman!

No worries, CBR125/150's will probabaly be pretty freaken hard to get parts for!

TBH i doubt Ivan's mate will actually have anything but its worth a try.

[nudemetalz]

Anyone got a spare braided line they do not require for my front brake?
(to purchase of course)

[Kendog]

Anyone got a spare braided line they do not require for my front brake?
(to purchase of course)

You can get them from Motormart for no money (they have a box of lines they cant use cause they are not road legal)

[nudemetalz]

ta Nigel. I'll have to pop out and have a looksie

[SHELRACING]

Thinking of upgrading the points ignition to cdi on the Delta's RX125 motor

Rm 80 as on our TZ looks a good option. Has anyone got a system or parts of for sale. Below are some pics of the TZ setup.

Other suggestions appreciated.

[F5 Dave]

That's not RM80, that is YZ80.

[ajturbo]

That's not RM80, that is YZ80.
so illegal?

[F5 Dave]

'course not. Read the rule book. Doesn't matter if you run an HRC ignition with a technician attached.

[ajturbo]

'course not. Read the rule book. Doesn't matter if you run an HRC ignition with a technician attached.
lol...

it ok dave.. i just wanted to sort it out.. hahhaa

[SHELRACING]

That's not RM80, that is YZ80.

Cheers Dave.

Was told it was RM 80, However it works well. Would be good if I could find something like this for the RX motor. TZ 350 is going to have a look for us.

Cheers
Steve

[F5 Dave]

nah Hitachi is yam & the coils look like YZ80 or similar yam, I have both RM & YZ.

[Pumba]

Steve I used the an AG100 on mine, only issue is that there are two different base plates. One is a straight bolt up and the other is not, dont know what year is which sorry.

Might be worth a look.

[F5 Dave]

Good point a lot of the yam stuff is similar. An Ag ign may be a little agricultural. Oh haha Dave,:wari:

[SHELRACING]

Steve I used the an AG100 on mine, only issue is that there are two different base plates. One is a straight bolt up and the other is not, dont know what year is which sorry.

Might be worth a look.

Chris Berkhan Mt Welly no 2, Had an AG100 ignition fitted when Kenny owned it. Had heaps of problems with it blowing out coils. As F5 Dave said it may be a bit errr agricultural......

[Buckets4Me]

yz sounds about right

I'm sure JC used them on the cb125t so would not be surprised if thats what DaveD got for his bikes as well

[hmurphy]

Does anyone know where I could find an FXR150 front rim? Who would I talk to? The one I have at the moment is very nicely bent to buggery. It doesn't need to come with spacers, bearings or disc. Or even a tyre! Just the rim!

Any help will be greatly appreciated!

[Pumba]

Ok then I will respond in here then.

Try Sideways Sam he seemed to be collecting them for a while there and I know he did have a couple of sets.

Didnt see him at the last meet and he hasnt been online for a while so I will PM you his cell as will be the fastest way to get hold of him.

[Ascott]

Hi, what sort of time do you "kick the dead leopards head off"? may come and have a look see! Will there be karts as well?
Al

[Ascott]

I know you were all clambering over each other to let me know what time start was, however I found it on another thread. Ta anyway
Al

[quallman1234]

WTB Decent 16" Rubber, 80/90 or 90/90 Front
Or a 17" Front Rim, preferably tiny.
Price = Cheap

[bucketracer]

.

Had a bit of a disappointment with bidding on something from JawaJoe. http://www.trademe.co.nz/Browse/List...x?id=232164527

I had wanted some spares for my Motorcrosser and bid for two sets of gears and a reed assembly.

The first picture is JawJoes auction and the second picture is what I received.

I asked about the condition of the gears and was assured they were fine.

I placed my bid and duly received one set of mangy gears and no reed valve.

I rang him about it and the tenure of his reply was "whinge, whinge, shop else where as old joe takes no prisoners"

If you received less than was pictured and described in the auction would you feel ripped off? I do.

He has eight red faces, three blue and many not completed sales, I should have checked before dealing with him, silly me.

If your buying from Trademe I suggest you give JawaJoe a skip.

.

[DELLORTO]

un-useable??

[bucketracer]

un-useable??

I certainly can't use the gears I didn't get.

And you certainly would't want me to use the gears I did get if I was repairing your bike.

.

[nudemetalz]

.

Had a bit of a disappointment with bidding on something from JawaJoe. http://www.trademe.co.nz/Browse/List...x?id=232164527

I had wanted some spares for my Motorcrosser and bid for two sets of gears and a reed assembly.

The first picture is JawJoes auction and the second picture is what I received.

I asked about the condition of the gears and was assured they were fine.

I placed my bid and duly received one set of mangy gears and no reed valve.

I rang him about it and the tenure of his reply was "whinge, whinge, shop else where as old joe takes no prisoners"

If you received less than was pictured and described in the auction would you feel ripped off? I do.

He has eight red faces, three blue and many not completed sales, I should have checked before dealing with him, silly me.

If your buying from Trademe I suggest you give JawaJoe a skip.

.

I've bought one or two things off him. Less than impressed the last time. He didn't give a toss about my complaints so yeah, steer clear. He also goes under "Terry53".

[quallman1234]

Yeah, i could of told you about him.

[Henk]

I'm after an exhaust header for a honda 125 single. The engine is an XL125 I think and the header runs out the side more than down. I'd like a header that I can use to hang the muffler more under the bike if anyone has something lying about.

[agent75]

hey there all. i'm in need of a cb125t barrel. for photos of the ol' one see the thread. be a pity not to get it going again

[Bren_chch]

Hey

after a stator cover and the oil pump. maybe sprocket cover also.

oh what else ya got?

Cheers

[Slingshot]

Hey

after a stator cover and the oil pump. maybe sprocket cover also.

oh what else ya got?

Cheers

I wanted that motor :)

[ajturbo]

well i have 2... and will have a 3rd soon... but they all MINE... hehehh

hahahahha

HAHAHAHAHAHA.. mine i tell ya

[Bren_chch]

I wanted that motor :)

damn, was an ok price I thought! :whistle:

[SHELRACING]

Anyone got a flywheel/ magneto cover for a TZ50.

Using the spare motor I picked up from Dave Diprose to put another F5 together :banana:

[Fooman]

Right time I got my buckets sorted out. Need/want the following:

1. Cylinder head and rocker cover for a DR/GS/DRZ/GN/125. May also consider DR200. All mine are either completely munched or heavily scored on the cam bearing surfaces (stupid design!).

2. Standard cylinder head for GP100 (or GP125 if the same). Want to replace the water-cooled head on there at the moment, until I can sort out a better mount for the radiator.

3. Motivation/tips to sort out nyloning on said GP100 bucket so I turn up at Kaitoke.

Cheers,
FM

[fi5hy]

Buckets must have:
• Plugged handlebars.
• Folding or nylon footpegs (kart track racing only)
• Anything that could mark the track must be nyloned over or bungs added to prevent them touching the track (kart track only). These must be very secure.
• Wired sump and oil plugs.
• Adequate front and rear brakes.
• No broken clutch and brake levers .
• Must remove side stands or wire them up and nylon protectors.
• Must have secure attachments for all parts of the bike.
• No dangerous attachments.
• Have no excessive leakage from fuel caps.
• Have all lights and mirrors removed.
• A catch tank for any fluids that might leak or overflow such as crankcase or gearbox breathers, float bowls etc.

[Sketchy_Racer]

Buckets must have:
• Plugged handlebars.
• Folding or nylon footpegs (kart track racing only)
• Anything that could mark the track must be nyloned over or bungs added to prevent them touching the track (kart track only). These must be very secure.
• Wired sump and oil plugs.
• Adequate front and rear brakes.
• No broken clutch and brake levers .
• Must remove side stands or wire them up and nylon protectors.
• Must have secure attachments for all parts of the bike.
• No dangerous attachments.
• Have no excessive leakage from fuel caps.
• Have all lights and mirrors removed.
• A catch tank for any fluids that might leak or overflow such as crankcase or gearbox breathers, float bowls etc.

So Baydens bike definitely shouldn't have been out there hahaha

[Slingshot]

2. Standard cylinder head for GP100 (or GP125 if the same). Want to replace the water-cooled head on there at the moment, until I can sort out a better mount for the radiator.


The GP 100 & 125 heads are different, the bore is 6mm larger in diameter.

I've got a GP100 head that I'll swap you for your water cooled one :)

[SHELRACING]

Hello people, anyone out there have a radiator that will fit the TZ50.

The bike is almost together, but the radiators we have are too big.

We maybe able to use a pocketbike one if anyone has a watercooled pocketbike that they dont want.

Cheers
Steve and Ellen

[monstacat]

rear brake caliper needed to fit ns250r new bucket project
can contact on 021858992 or pm me
Ta Chris

[AndyPandy]

Hey all, i'm in need of a complete GL145 gearbox (gears, shafts, selector drum yolks and star etc) or stuffed bottom end with all this intact for my daughters bucket that were trying to finish. The mechanic that was doing a 'perk job' on the bottom end for her has "LOST" our gearbox. :bash:
Yes.. im pissed but, its not worth a second visit from the cops over it all!
Can anyone help us out?
Ta
Andy

[fi5hy]

I have most of those bits new PM me with a list or better photos

[ajturbo]

yes..

the GT is

ALIVE


but it wont rev freely...
seams to be , not crisp... could that be old petrol?

Air filters, blocked?

help....:blink:

[Slingshot]

Hey all, i'm in need of a complete GL145 gearbox (gears, shafts, selector drum yolks and star etc) or stuffed bottom end with all this intact for my daughters bucket that were trying to finish. The mechanic that was doing a 'perk job' on the bottom end for her has "LOST" our gearbox. :bash:
Yes.. im pissed but, its not worth a second visit from the cops over it all!
Can anyone help us out?
Ta
Andy

I've got some GL145 bottom ends too - PM me with what you need and we'll see what we can sort out.

Cheers John

[Bren_chch]

yes..

the GT is

ALIVE


but it wont rev freely...
seams to be , not crisp... could that be old petrol?

Air filters, blocked?

help....:blink:

ahh its fucked, common problem! give u 50 for it :scooter:

[AndyPandy]

Slingshot, im too much of a Noobie to PM apparently (restrictions on my acct) so have emailed toy instead.
Ola emailed me that you might be 'the man of many bottom ends'
Thanks Man.
Andy

[Trudes]

Haha, The Unknown Rider aka The Man Of Many Bottom (End)s. :laugh:

[AndyPandy]

Tehehehe...

[Slingshot]

Slingshot, im too much of a Noobie to PM apparently (restrictions on my acct) so have emailed toy instead.
Ola emailed me that you might be 'the man of many bottom ends'
Thanks Man.
Andy

I've sent you an email because, I had an old email address registered against my KB account, let me know haven't got it.

[AndyPandy]

Thanks unknown rider, as they say... " you have mail "

[BOGAN02]

Im looking for a few parts for my ax100. I am in dire need of a coil. Have been told by the wise skunk that a rg50 coil or the likes may do just the trick. Or any suzuki coil with an internal cdi. so if someones got one they would like to donate or get rid of for cheap i would be muchly interested. Cheers.


:wari:

[all4A50s]

Im looking for a few parts for my ax100. I am in dire need of a coil. Have been told by the wise skunk that a rg50 coil or the likes may do just the trick. Or any suzuki coil with an internal cdi. so if someones got one they would like to donate or get rid of for cheap i would be muchly interested.

Talk to Bryce from Bucket and bits. He has suggested to me the Suzuki 80cc quad have the type that'll work.

[racefactory]

hey guys does anyone have a gl145 brake caliper or a front end that will fit a gl145? thanks.

[bungbung]

Are you near Wellington? I have most of a GL145 I need to get rid of

[sidwyz]

hey guys does anyone have a gl145 brake caliper or a front end that will fit a gl145? thanks.

Yeah I have a caliper that has new performance pads in it, so would ask $60 for it

[sidwyz]

Are you near Wellington? I have most of a GL145 I need to get rid of

Hey mate do you have a motor or any parts of? price?
how much for rear shocks?

[Hazzard]

Has anyone got a spare FXR fuel filler cap they want to sell? Cheers.

[Billy]

I have a Bosson racepipe for a 125 for sale $200.00.Has a small dent underneath otherwise in ex condition

[ajturbo]

I have a Bosson racepipe for a 125 for sale $200.00.Has a small dent underneath otherwise in ex condition
will that fit mt 50?:baby:

[Billy]

will that fit mt 50?:baby:

Fuck I know!Buy it and try it

[NOID]

rito, i need a ZZR 250 rear set, right hand side, just the alloy bracket, no foot peg or brake. last owner had welded it up, then i had an off the other night :Oops:. Does a ZXR250 one fit? or does any one know where i could get a cheap after market adjustable one from ?or should i just spend some time and fab up a new one ?

[DELLORTO]

rito, i need a ZZR 250 rear set, right hand side, just the alloy bracket, no foot peg or brake. last owner had welded it up, then i had an off the other night :Oops:. Does a ZXR250 one fit? or does any one know where i could get a cheap after market adjustable one from ?or should i just spend some time and fab up a new one ?

ive got a machined one from an fxr i dont need, if it fits.....


also do you still want the bottom fairing cowling from an fxr? its lying around the shed, you can have it for free.

[NOID]

pm me a pic of the bracket, na dont need another peice of plastic on the bike iv decided now, i dummy tested one off my road going fxr the other day looked a bit gay :sick:

[Damien_Toman]

The right footpeg bracket on my FXR150 is cracked right through the metal (see photos). It is also bent. Does anyone know where I can get a replacement? I don't want the standard Suzuki part as they always break easily (Dellorto tells me). I would like to retain the standard peg and brake lever if possible.

[Bren_chch]

hey, i would grind that out and get it welded up, all good.

[Henk]

The trick seems to be to get one made out of 10mm alloy plate. There are a couple of guys at Mt Wely that have had them made but the two I've spoken to are both out of stock at the moment. I'm planning on getting some plate and getting busy with the hacksaw and drill when I get a chance.

[Pumba]

Hi Dammian. couple of pictures here (http://www.kiwibiker.co.nz/forums/showthread.php?t=84120&highlight=bracket&page=5) of what I have done and Buddha as well. Depends if you are going to make a habbit of crashing, I seem to have made that habbit so wanted somthing a bit stronger than standard.

[laserracer]

Wanted carb for xr/xl/sl/cb i think they are all the same 22mm khein its off a xr 100

[Damien_Toman]

hey, i would grind that out and get it welded up, all good.

I'll check out a local welder to see if they will do it. Thanks.

[Damien_Toman]

Hi Dammian. couple of pictures here (http://www.kiwibiker.co.nz/forums/showthread.php?t=84120&highlight=bracket&page=5) of what I have done and Buddha as well. Depends if you are going to make a habbit of crashing, I seem to have made that habbit so wanted somthing a bit stronger than standard.

Thanks Pumba. The pictures really help. I might now have a go at making my own.

[Pumba]

Thanks Pumba. The pictures really help. I might now have a go at making my own.

Yea they are not that hard. Min are actually more complicated than they need to be. I made them with the intention of being adjustable but I set them in one position, rode it round and thought year that will do and they have never been moved since.

[Trudes]

Anyone have a RG50 footpeg mount they don't need?

[Number One]

Anyone have a RG50 footpeg mount they don't need?
And how's the handlebar? Will it straighten up will I need to source a replacement one for ya?

[Trudes]

And how's the handlebar? Will it straighten up will I need to source a replacement one for ya?

We're going to try and straighten it and if it doesn't Skunk said he may have a replacement, so that should be sweet.

[Number One]

We're going to try and straighten it and if it doesn't Skunk said he may have a replacement, so that should be sweet.
Well if he doesn't let me know! Thanks for the soak too :yes:

Back to bed with this broken down bod again now.

[all4A50s]

Anyone have a RG50 footpeg mount they don't need?

I might be able to help you out. I'll have a hunt through tonight and let you know.

[Danae]

WANTED: FXR Clutch lever + mount

Mount is cracked, lever is okay, just a bit ground down.

[quallman1234]

WANTED: FXR Clutch lever + mount

Mount is cracked, lever is okay, just a bit ground down.

Hey there, you can rock down to your local bike shop and buy a generic clutch bracket and lever for 20 odd bucks.

[F5 Dave]

Just check it has mirror mount if you need it (too lazy to look for an FXR pic). But any wrecker will have a suitable one if no dice at shop.

[quallman1234]

Just check it has mirror mount if you need it (too lazy to look for an FXR pic). But any wrecker will have a suitable one if no dice at shop.

Oh yeah completely forgot about that. Fair point. You only need a mirror on the right side legally anyway!

[Henk]

Doesn't need a mirror mount.
I got some cheap emgo lever for the bucket at one stage, you can get the GP short number that is less likely to break if you drop it again for not that many coins.
Any aftermarket lever should do, doesn't need mirror mounts or idiot switches from memory.

[ajturbo]

WANTED: FXR Clutch lever + mount

Mount is cracked, lever is okay, just a bit ground down.
why????...

[Danae]

why????...

Binned .

[fixer]

Hi to all Auckland FXR bucketeers. Does anyone have an unmolested GSX-R250 rear wheel that they are planning to have machined to fit the back of an FXR150? I've acquired one that's already been machined and has had the appropriate bearings fitted, but one that hasn't been machined would actually be more suitable for my purposes. I would be interested in doing a straight swap for a suitably straight item. Feel free to text me on 021 963-280 if you want. Tim

[motorbyclist]

Any aftermarket lever should do, doesn't need mirror mounts or idiot switches from memory.

As I've found in the past, the new lever has to have the same shape as the old one:

if the distance from pivot to cable is too short you don't pull enough cable to disengage the clutch fully - and if the new lever is going to hit the bar sooner than the old one it's the same problem again.

In the past Henderson yamaha insisted this wasn't the case and wasted a good half hour of riding time and even tried to sell me a new clutch cable (which would achieve nothing) when frosty had the right one for half the price just down the road.

Looking for this FXR part yesterday only the parts boy at colemans knew this, but quoted $130 to have the genuine part shipped in. Everywhere else didn't know this and tried to sell me more reasonably priced levers that clearly weren't a match

[ajturbo]

Binned .
why?????............

[Trudes]

Anyone have a RG50 footpeg mount they don't need?

Still looking for one of these. Need a right-hand side one. Will pay, borrow or steal.... Really only need it to pass scrutineering at Taupo for the RRS, so am happy to borrow and send back after if anyone has one they could lend me.

Please, anybody.

[all4A50s]

Sorry for taking so long. If its the one with the brake lever your wanting. I've got one you can have. PM me

[Trudes]

Sorry for taking so long. If its the one with the brake lever your wanting. I've got one you can have. PM me

No worries. I think I may have one sorted, but if it falls through I'll be in touch, thanks :)

[Ms Piggy]

Hi All - I have a CB250RS listed on Trade Me. I'm sure it could be used for bucket bits. I'm not selling it in bits just the entire bike.

http://www.trademe.co.nz/Browse/Listing.aspx?id=258570263

[wbks]

Anyone have any cb tanks with no deep dents for sale?

[F5 Dave]

Sure I'm physic.

I'm assuming you mean a K0 CB750 tank, that would be a classic so say 2k?

Ahh but this is the buckets thread so I'll assume you mean a '68 twin with the breadbox & knee pads. Sorry all out of those.