Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: M109 rear wheel slip.

  1. #1
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802

    M109 rear wheel slip.

    I'm posting for a mate who has a brand new M109. He rides 2 up with his lady and combined they weigh about 130Kg. He gets a lot of trouble with the rear wheel slipping on corners. It sounds like a suspension pressure issue to me however he says that it is not and many M109 owners have the same issue and generally change the rear tyre from day one.

    This sounds like Bollox to me however I was wondering if anyone was aware of similar M109 experiences?
    “PHEW.....JUST MADE IT............................. UP"

  2. #2
    Join Date
    27th November 2003 - 12:00
    Bike
    None any more
    Location
    Ngaio, Wellington
    Posts
    13,111
    If Mrs H and I had a combined weight of 130kg, rear wheel slippage would be the least of my worries...
    "Standing on your mother's corpse you told me that you'd wait forever." [Bryan Adams: Summer of 69]

  3. #3
    Join Date
    5th August 2007 - 19:35
    Bike
    one that goes
    Location
    In a tent
    Posts
    792
    loosen up on the hand (throttle) going into and around a corner those bikes have exceptional Torque avalible, apply the gas more when the bike starts to stand up a bit..Tyre pressures, and yes may need a bit more preload...

  4. #4
    Join Date
    5th August 2005 - 14:30
    Bike
    Various
    Location
    Auckland
    Posts
    4,359
    Quote Originally Posted by Hitcher View Post
    If Mrs H and I had a combined weight of 130kg, rear wheel slippage would be the least of my worries...
    I take it you would be concerned as it would mean she was 5kg.
    Quote Originally Posted by Tank
    You say "no one wants to fuck with some large bloke on a really angry sounding bike" but the truth of the matter is that you are a balding middle-aged ice-cream seller from Edgecume who wears a hello kitty t-shirt (in your profile pic) and your angry sounding bike is a fucken hyoshit - not some big assed harley with a human skull on the front.

  5. #5
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    Quote Originally Posted by duckonin View Post
    loosen up on the hand (throttle) going into and around a corner those bikes have exceptional Torque avalible, apply the gas more when the bike starts to stand up a bit..Tyre pressures, and yes may need a bit more preload...
    I hadn't thought that is might be that he's letting the bike work through the corner. He says that the excessively wide rear wheel exerts a braking effect on the bike, hence why he sees the need to use power.

    I'd prefer a C50 myself, which seems to be a better balanced unit.

  6. #6
    Join Date
    27th November 2003 - 12:00
    Bike
    None any more
    Location
    Ngaio, Wellington
    Posts
    13,111
    Quote Originally Posted by The Stranger View Post
    I take it you would be concerned as it would mean she was 5kg.
    Well, let's just say less than 30kg and leave it at that, eh?

    There's a big difference between a waif and a wafer.
    "Standing on your mother's corpse you told me that you'd wait forever." [Bryan Adams: Summer of 69]

  7. #7
    Join Date
    7th December 2007 - 12:09
    Bike
    Valkyrie 1500 ,HD softail, BMW r1150r
    Location
    New Plymouth
    Posts
    2,144
    Quote Originally Posted by YellowDog View Post
    . He rides 2 up with his lady and combined they weigh about 130kg?
    Well that's the problem isn't it...?

    Not that they need more preload......they need preload..
    Period!

    Sounds to me they need seatbelts rather then helmets.......

    Fly off in a bit of a headwind...
    Opinions are like arseholes: Everybody has got one, but that doesn't mean you got to air it in public all the time....

  8. #8
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    Quote Originally Posted by awayatc View Post
    Well that's the problem isn't it...?

    Not that they need more preload......they need preload..
    Period!

    Sounds to me they need seatbelts rather then helmets.......

    Fly off in a bit of a headwind...
    You are right in that it is a big bike for such a light weight.

    Seat belts or maybe parachutes.

  9. #9
    Join Date
    12th May 2007 - 23:34
    Bike
    2007 Suzuki M109r
    Location
    Christchurch
    Posts
    13
    Never heard of this issue.

    Sounds like he's either heavy on the throttle or (more likely) he's changing down and letting the clutch out without giving it some gas. These things are heavy on engine braking, especially with the shaft drive, and he's most probably locking up the back end.

    I got a lecture the other day by a knob riding a harley (ulysses member of course) cos he saw me using the brake around a corner.

    He reckoned I'd have more power if I didn't do it. Of course being a tractor rider he didn't figure that I didn't need any more power, and of course being in a group ride it's always nice not going up the rear end of the person in front of you.

  10. #10
    Join Date
    27th February 2007 - 19:02
    Bike
    Not many... If any...
    Location
    North Otago
    Posts
    1,061
    Never had that problem on mine. Then again I weigh around 80 and very rarely took anyone on the back..

  11. #11
    Join Date
    8th October 2006 - 16:33
    Bike
    big shiney pommy & an italian
    Location
    In the middle
    Posts
    250
    Yeah mate I agree with most of the above .The 109 has massive engine braking and does not like being told what to do mid corner!!
    Just tell them to cruise through the corner and let the big boy do its thing then twist the throttle and enjoy!!!

  12. #12
    Join Date
    22nd August 2003 - 22:33
    Bike
    ...
    Location
    NZ
    Posts
    4,205
    Blog Entries
    5
    Is he positive it's wheel slip and not swing arm/frame flex? I was staggered at the jello-like feeling of the whole bike when being pushed along on roads it's not designed to go on.....

  13. #13
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    Check tyre pressures. Try lowering them a bit. Tyres inflated harrrd are skittery as fuck.

    Steve
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  14. #14
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    OK now he has explained that it only happens in the wet. In the dry he is very happy with the handling however in the wet he finds it unpredictable and prone to slip whilst cornering. Apparently there is an alternative tyre brand that is better in the wet.

    I told him that not one KBer agrees with him

  15. #15
    Join Date
    17th November 2006 - 09:47
    Bike
    s83 boulevard
    Location
    wanganui
    Posts
    162
    More than likely stock tires if he's still on them.I'm pretty sure most of the Boulevard series come out with Bridgestone tires,i know my S83 did.Bridgestones are not good in the wet especially with that amount of torque.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •