Results 1 to 9 of 9

Thread: Suzuki GS500 2001 - tyre repair & checking oil levels

  1. #1
    Join Date
    5th January 2004 - 11:00
    Bike
    2008, GSR600K
    Location
    Hutt hutt hooray!
    Posts
    2,924

    Question Suzuki GS500 2001 - tyre repair & checking oil levels

    Just last week I got my new bike (the GS500), I've only ridden it a couple of time since getting it but today I was checking it over and now have a couple of maintenance type questions. Please excuse the basic level of my questions, it's only the 2nd motorbike I've owned (before you ask - no I don't have a manual for the bike).

    1. Repair of rear tyre - check out what I found lodged in the rear tyre today! Yikes! Where can people recommend as a reliable place to get the tyre repaired? I live in Lower Hutt but I work in town.

    2. Checking the oil - do I screw the dip stick back down or just sit it back in place to get the correct oil level (on my old Honda I was told not to screw it down)? Also, do I check the oil with the bike on the centre or side stand (I read somewhere else in this section that oil shouldn't be checked with the bike on centre stand)?

    Thanks in advance for your help.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Nail 007.JPG 
Views:	18 
Size:	193.3 KB 
ID:	137594   Click image for larger version. 

Name:	Nail 009.JPG 
Views:	22 
Size:	89.7 KB 
ID:	137595   Click image for larger version. 

Name:	Nail 012.JPG 
Views:	22 
Size:	132.2 KB 
ID:	137596  
    My goal in life is to be as good a person as my dog already thinks I am.

  2. #2
    Join Date
    9th October 2003 - 11:00
    Bike
    2022 BMW RnineT Pure
    Location
    yes
    Posts
    14,591
    Blog Entries
    3
    Replace the tyre if you can manage it. I'm never comfortable on repaired tyres. Repairs should be treated as temporary IMO.

    Don't check the oil on any stand. Get the bloke to hold it upright.

    I'll find you a maintenance manual and send to it you via email.
    If a man is alone in the woods and there isn't a woke Hollywood around to call him racist, is he still white?



  3. #3
    Join Date
    2nd January 2009 - 19:08
    Bike
    Bikeless.NNnnnooooooooo!
    Location
    PhuBia PDR Laos
    Posts
    1,638
    Blog Entries
    10
    Quote Originally Posted by James Deuce View Post
    Replace the tyre if you can manage it. I'm never comfortable on repaired tyres. Repairs should be treated as temporary IMO.

    Don't check the oil on any stand. Get the bloke to hold it upright.

    I'll find you a maintenance manual and send to it you via email.
    Wot he says on the oil...

    Is air leaking from the tire? It may only be superficial in the tread. Take it to a chosen shop then remove nail, you may be lucky ....

  4. #4
    Join Date
    13th March 2003 - 11:47
    Bike
    2006 Honda XR250L
    Location
    Porirua
    Posts
    7,355
    MotoMart should be able to take your tyre off the rim and put a proper plug in it from the inside and balance it for you and you'll be OK with it. Its only the externally applied plugs that are considered temporary these days.
    Cheers

    Merv

  5. #5
    Join Date
    9th October 2003 - 11:00
    Bike
    2022 BMW RnineT Pure
    Location
    yes
    Posts
    14,591
    Blog Entries
    3
    Had an internal one slow leak on me Merv. I can't reccommend them.
    If a man is alone in the woods and there isn't a woke Hollywood around to call him racist, is he still white?



  6. #6
    Join Date
    23rd December 2006 - 20:07
    Bike
    Honda cb400sf
    Location
    Napier
    Posts
    457
    i think the problem with plugging the modern tyres is that theres a single wire about 300 meters long and when you get a flat it cuts the cord and the tyre loses structual strength. this can change the profile and strength of the tyre giving the bike a crappy ride.

    but all puctures are different.

  7. #7
    Join Date
    5th January 2004 - 11:00
    Bike
    2008, GSR600K
    Location
    Hutt hutt hooray!
    Posts
    2,924

    Thumbs up

    Thanks people for the info people.

    I actually took the bike into TSS (because it's closest to where I live and I didn't want to be really late for work) and they repaired the punctures (yep, they found 2 nails!), I did ask the guy if I would need a new tyre but he assured me that because of where the nail was on the tyre it'll be fine - I'll make sure I keep an eye on too.
    My goal in life is to be as good a person as my dog already thinks I am.

  8. #8
    Join Date
    12th August 2004 - 09:31
    Bike
    2013 EX300SE
    Location
    Top of the Gorge
    Posts
    1,511
    You leave the dip stick sitting on the casing to get a correct reading. This should be done with the bike level, and not on the side or centre stand.

    I suggest that you log on to GSTwin and see if they have any downloads of the manual for the GS. If you look around they've got info on most questions that you'll have.

    You should get the tyre relaced at some stage. Bridgestone Battleaxes always work well on the GS.

  9. #9
    Join Date
    9th June 2008 - 22:46
    Bike
    suzuki GS500
    Location
    auckland
    Posts
    104

    GS500 manual

    I have a PDF of the haynes manual PM me if you want me to email it to you

    You can also use the centre stand on a level suface to check the oil

    Click on the link below to get to the GS forum

    Grwat bike BTW basically beebn selling the same bike for 20 years

    Cheers
    The project bike builders motto: The perfect is the enemy of the good

    GS 500 page includes wiki : http://www.gstwin.com/

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •