Results 1 to 7 of 7

Thread: RVf 400 gasket set / aftermarket parts

  1. #1
    Join Date
    3rd May 2005 - 19:27
    Bike
    2007 Tuono R, RVF400, 08 YZF450
    Location
    Nelson
    Posts
    179

    RVf 400 gasket set / aftermarket parts

    Hey,

    I am trying to track down a after market gasket set for my RVF 400 NC35 race bike as I got quoted for genuine honda it will cost about $860!!!

    I am also after a selector fork and a 6th gear pinion if anyone knows a supplier who can get these.

    Please let me know if you can help.

    Cheers
    JB
    Harley Davidson is the best,
    Ride a mile and walk the rest!

  2. #2
    Join Date
    18th May 2005 - 09:30
    Bike
    '08 DR650
    Location
    Methven
    Posts
    5,255
    Tried Rick Oliver? http://www.rvf.dk/rickoliver/
    He's on 400greybike and does heaps of genuine and aftermarket bits


  3. #3
    Join Date
    9th June 2008 - 22:46
    Bike
    suzuki GS500
    Location
    auckland
    Posts
    104

    gasket set supplier

    bkperformance.com.au

    They do athena sets I got a twin set for $150.00
    Took about a week and the guy was very helpful

    HTF do they justify $860.00??

    Good Luck
    The project bike builders motto: The perfect is the enemy of the good

    GS 500 page includes wiki : http://www.gstwin.com/

  4. #4
    Join Date
    3rd May 2005 - 19:27
    Bike
    2007 Tuono R, RVF400, 08 YZF450
    Location
    Nelson
    Posts
    179
    Hey,

    Tried rick and bk but not much luck, rick can supply but not for about 3 weeks because he is out of stock and supplier has none

    Anyone else have any ideas?

    Cheers
    JB
    Harley Davidson is the best,
    Ride a mile and walk the rest!

  5. #5
    Join Date
    3rd August 2006 - 19:35
    Bike
    B12
    Location
    West Auckland
    Posts
    2,800
    Quote Originally Posted by Squiggles View Post
    Tried Rick Oliver? http://www.rvf.dk/rickoliver/
    He's on 400greybike and does heaps of genuine and aftermarket bits
    Sorry for the thread dredge, is he good to deal with? are his shipping rates reasonable?

    I need a jackup plate and was thinking about the step up plates for the stock footrest assemblies..
    Quote Originally Posted by NinjaNanna View Post
    Wasn't me officer, honest, it was that morcs guy.
    Quote Originally Posted by Littleman View Post
    Yeah I do recall, but dismissed it as being you when I saw both wheels on the ground.
    Quote Originally Posted by R6_kid View Post
    lulz, ever ridden a TL1000R? More to the point, ever ridden with teh Morcs? Didn't fink so.

  6. #6
    Join Date
    17th November 2008 - 10:08
    Bike
    SV650
    Location
    Ireland, for now
    Posts
    437
    Quote Originally Posted by Morcs View Post
    Sorry for the thread dredge, is he good to deal with? are his shipping rates reasonable?

    I need a jackup plate and was thinking about the step up plates for the stock footrest assemblies..
    Not sure on postage rates for this side of the world but he is good to deal with. I was running the jack up plates on my RVF and they helped a bit but then the exhaust touches down next
    K Ryan #119
    supported by
    Motodynamix, One tonne apparel, Pirelli, EBC brakes, AGV, Clover, RST, EK Chains, Repsol
    Thanks for your support

  7. #7
    Join Date
    3rd August 2006 - 19:35
    Bike
    B12
    Location
    West Auckland
    Posts
    2,800
    Quote Originally Posted by racerhead View Post
    Not sure on postage rates for this side of the world but he is good to deal with. I was running the jack up plates on my RVF and they helped a bit but then the exhaust touches down next
    Thats the plan with the jackup plate, raises the rear 35mm so the exhaust doesnt lift the backwheel off the ground when cornering!
    Quote Originally Posted by NinjaNanna View Post
    Wasn't me officer, honest, it was that morcs guy.
    Quote Originally Posted by Littleman View Post
    Yeah I do recall, but dismissed it as being you when I saw both wheels on the ground.
    Quote Originally Posted by R6_kid View Post
    lulz, ever ridden a TL1000R? More to the point, ever ridden with teh Morcs? Didn't fink so.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •