DR750/800 owners and those interested

[JATZ]

Jatz, just stick the engine from the KLR in there.



If the chassis can handle the powerrrrrrrr!

Orrrrr a weekend in the man cave and I could have a DR extra big........ 900 triple

probly wouldn't work but it'd sound effin awsome

[dino3310]

picked up cush drive of Nooles.
so after a re-spoke and new bearings the BIG will be 100% BIG
had a good catch up 2, Hopefully catch up on a ride soon


BIGs

[JATZ]

picked up cush drive of Nooles.
so after a re-spoke and new bearings the BIG will be 100% BIG
had a good catch up 2, Hopefully catch up on a ride soon


BIGs

Nice.......

[nooles]

picked up cush drive of Nooles.
so after a re-spoke and new bearings the BIG will be 100% BIG
had a good catch up 2, Hopefully catch up on a ride soon


BIGs

I'll look into that swing arm rubber guide mate and get back to ya.Back home from Hamilton but caught some wicked bug and sick as Fcuk(no not hamilton herpes)long drive home when your crook

[dino3310]

no herpes in Hams only clamidia
cheers matey and get well

[JATZ]

Just been down in the shed putting the new tail light on, its a KTM one, goes with the KTMchain guide I stuck on last week.
Gunna ditch the number plate holder and tail light thingy

[dino3310]

Just been down in the shed putting the new tail light on, its a KTM one, goes with the KTMchain guide I stuck on last week.
Gunna ditch the number plate holder and tail light thingy

they look a way cooler when the plate holder and tail light thingy are gone

[JATZ]

they look a way cooler when the plate holder and tail light thingy are gone

Pics to follow..... when I get it finished, the angles are all wrong to just slap it together, why can't ktm make a tail light with the proper angles

[dino3310]

Pics to follow..... when I get it finished, the angles are all wrong to just slap it together, why can't ktm make a tail light with the proper angles

[JATZ]

Sorta stuck without the new indicators so things have slowed down, also need a new # plate, the old one's about ready to drop off

Patience grasshoper

[JATZ]

Indicators are still a work in progress, I think they need to come down more to be horizontal and..... I smashed one backing the Trumpy in so I had room for the XT and KLR,Daughters scooter may be evicted, it is the bottom of the food chain after all. I havn't got round to getting a new # plate, but you get the idea.
Bore should be back this week.

[Paladin]

That's startin to look pretty serious mate!

[dino3310]

sweet James, looking good
i gotta get me one of those chain guards

[dino3310]

Im starting to think my BIG dont like me , got home early to get her in for a WOF shite battery flat buga have to push start, so i gotta back her out of shed and turn just through the door onto grass and then forwards down drive(steap drive no room to turn in shed) , i hop on drop into 2nd, still at a slight turn angle cause im not yet straight on drive, ooohhh shit, lock up, of balance, over she goes on downhill side on top of me right ankle friggin AGAIN pinning me ankle against a little bit of retaining wall, 5 mins later i wriggle out of it, back on manage to hop start her.

of down to get WOF...Fail....what,why, rear wheel wobbly, so hop bike along out side, factory tool kit still aboard(whew) tighten wheel nut(flippin thing had almost worked its way of) hop back in to inspector PASS

Take her for a run to morrinsville to charge up battery, get home awe bugga the little mesh bit on the front sprockett cover has gone too, what next whooooop on my but trip over some flax next to shed door, and while sitting on the floor im looking at the new scratches on the BIGs tank

[Eddieb]

Mate, that sucks.

$500 and I'll take it off your hands and put you out of your misery